North Seattle College
North Seattle College(formerly known as North Seattle Community College) is a four-year college in Seattle, Washington. It is one of the three colleges comprising the Seattle Colleges District and part of the Washington Community and Technical Colleges system. The college has stro…
What does the back up valve do on a Polaris cleaner?
What does a Polaris back up valve do? The Polaris Back Up Valve is a mechanism attached to the cleaner's feeder hose, which helps the Polaris cleaner maneuver the floor of your pool. If this item is malfunctioning then your cleaner may not be able to clean effectively.
How do you install a backup valve on a Polaris 360?
Place the mechanism in the backup valve case. Screw the case back together by hand, ensuring you do not overtighten. Examine the hose the backup valve is attached to. Ensure the backup valve opening points towards the Polaris 360 pool sweep.
What are the issues with the Polaris 280 backup valve?
Polaris 280 backup valve issues 1 Verify the back-up valve is cycling 2 Check the wheel RPM 3 If the bag is full, empty it 4 If the float has water in it, replace it 5 Make sure feed hose is floating
How does a backup valve work on a pool sweep?
The backup valve fires a burst of high pressure water from its nozzle, which propels the pool sweep backwards, enabling it to continue cleaning the pool. Sorry, the video player failed to load. (Error Code: 100013)
What does Polaris backup valve do?
When the Polaris 360 gets stuck in a corner or otherwise hampered by objects in the pool, the sweep's backup valve frees it. The backup valve fires a burst of high pressure water from its nozzle, which propels the pool sweep backwards, enabling it to continue cleaning the pool.
Will Polaris work without backup valve?
Well-known member. I run my Polaris without a backup valve and it works fine. It actually works better than it does with the valve in place...Nov 21, 2015
How long should a Polaris backup valve work?
1 min seems a bit long for a backup cycle. The unit should go into backup about every 4-5 min. if it is longer than that, the gears may be worn, or in the case of only 18 months, a defective gear box that prematurely failed.Oct 11, 2014
What is a pool backup valve?
The Polaris Backup Valve is located on the Polaris Leader hose and is responsible for pulling the Polaris Cleaner away from pool obstacles and increases its random pattern. The Replacement Polaris Backup Valve Kit is suitable for all Polaris Pressure Cleaners (Polaris 3900s, Polaris 280, Polaris 380 and Polaris 180).
Why is my Polaris going in circles?
If your Polaris 65 is turning in a circle continuously rather than being random left or right, the randomizer ball is not coming free from the steering port. Being stuck means there is too much leakage into the steering section when the flow should be minimum.Jun 8, 2013
Why does my Polaris pool cleaner go on its side?
0:041:10Polaris Cleaner On its Side on Bottom and Spinning in a Circle - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd more than likely it's just float right here in the back that's lares this float just pulls rightMoreAnd more than likely it's just float right here in the back that's lares this float just pulls right off. And basically you shake it and you hear that water in there and it's pretty heavy.
Why does my Polaris keep getting stuck?
Adjust the float about 1 inch from the mast pipe. So push it all the way in and then pull back about an inch. If it still get stuck adjust the thrust jet at the back by slightly loosing the screws on around the base of the jet and play around with it until it covers the pool properly. Hope this helps.Oct 21, 2011
How do you open a Polaris backup valve?
2:105:21Polaris backup valve repair Tutorial - Save $50.00!! - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow you may need to replace this if your backup valve never shuts off the gearing the gears on it orMoreNow you may need to replace this if your backup valve never shuts off the gearing the gears on it or gonna be messed up and you're gonna want to replace it with a new one.
Which way does Polaris backup valve face?
0:131:04Installing a Polaris BackUp Valve - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe new one you want to make sure that the outlet for the water jet is facing the Polaris and IMoreThe new one you want to make sure that the outlet for the water jet is facing the Polaris and I think they recommend about 18.
How far should the backup valve be from the Polaris?
30"The Polaris in-line back-up valve and float should be installed 30" from the Polaris.
How much is a back up valve?
Installing during the initial construction is naturally much cheaper, and can be installed for between $150 to $250. When retrofitting, some concrete will need to be removed to access the main sewer line. The cost to retrofit a backwater valve can range from $1,000 to $2,000.
Why are my Polaris wheels not turning?
The most common problem is an issue with debris in the line or the hoses becoming un-attached. Take a minute to check if you see any debris clogging the jet or lines. If there are debris, blow the jet lines out using a air compressor. If you don't see any debris, check the hoses in the cleaner.
How to remove Polaris back up valve?
To remove the Polaris Back up Valve from the feeder hose and hose assembly, unscrew the plastic nuts on each side of the valve and slide the hose off the valve nozzle. Replacement Polaris 280 Pool Cleaner part #: 3260-D015
What is a back up valve for a Polaris pool cleaner?
The Polaris Back Up Valve is a mechanism attached to the cleaner's feeder hose, which helps the Polaris cleaner maneuver the floor of your pool. If this item is malfunctioning then your cleaner may not be able to clean effectively.#N#Click Here to Find Your Polaris Pool Cleaner Parts
