Can I use polyurethane to fill the holes between pennies?
Therefore, trying to fill the holes between the pennies with polyurethane is not a great solution. The poly may not dry between the pennies and that wouldn’t be a good thing. If you seal your penny floor with epoxy, the epoxy will harden between the pennies in the same way a grout would. In this case it’s not necessary to grout.
How do you glue pennies to the floor?
I recommend using good old fashioned Elmer's Glue (Made in the USA) to glue the pennies. Use the Elmer's Glue and place each penny on the floor. The trick is not to use too much glue. Elmer's claims to dry clear, but it is a bit cloudy still once it dries.
What is the best sealant to use on hardwood floors?
Penny Floor Sealant / Clear Coat: There are many options for sealers; mostly epoxy and polyurethane. I used Minwax Polyurethane for Floors. I don’t have any experience with using the epoxy although several readers have used it successfully.
Is Grout an optional step when painting a penny floor?
I do not consider the grout to be an “optional” step unless you plan to use epoxy to seal your floor. Metal Paint Scraper: Recommended if you are using the penny floor template. Penny Floor Sealant / Clear Coat: There are many options for sealers; mostly epoxy and polyurethane. I used Minwax Polyurethane for Floors.
What epoxy is best for penny floor?
Apply epoxy We recommend Wessex Permakote for this. It's a solvent-free, ultra-tough, two-part epoxy clear coating that pours like liquid glass and will give a stunning finish to your penny floor. It's resistant to water, alcohol, many acids and solvents.
Do you need to grout a penny floor?
If you seal your penny floor with epoxy, the epoxy will harden between the pennies in the same way a grout would. In this case it's not necessary to grout. But, grouting is also an option if you like the look of it — the grout will not affect the epoxy. Grout the pennies just as you would any other tile.
How do you grout a penny floor?
8:0017:00Penny Tile Installation + Grout | Post Frame Home Bathroom - YouTubeYouTubeStart of suggested clipEnd of suggested clipReady got a sponge. Ready. So i'll be happy to switch out water for her. So she can have clean waterMoreReady got a sponge. Ready. So i'll be happy to switch out water for her. So she can have clean water as we go on. The. Soap so i got emily started on grouting.
How many pennies does it take to make a penny floor?
The penny floor can be found at the Standard Grill at the new Standard Hotel in New York, the one straddling the High Line. The Standard tells us that it used 250 pennies per square foot, or 480,000 pennies in all.
How do you finish penny tiles?
1:092:39How To Install Penny Tile - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt by just sticking one in there. So that um you know once it's routed should look like it's alwaysMoreIt by just sticking one in there. So that um you know once it's routed should look like it's always been there my way of checking penny tiles that look like if I look at if it looks like a flower.
How do you caulk a penny tile?
6:5111:16How to Caulk Tile for a Great Finish - YouTubeYouTubeStart of suggested clipEnd of suggested clipCome back and just keep working it so as you can see every time I make a pass about two three inchesMoreCome back and just keep working it so as you can see every time I make a pass about two three inches at all just wipe that excess caulk right off onto the sponge. And keep going.
How do you keep a penny tile floor clean?
In general, hot water is enough for cleaning but if you need to remove stains then mixing one part warm water and one part scouring powder works. For porcelain penny tiles, the vinegar and water solution is the way to go.
Can you grout pennies?
Non-sanded grout is more like fine dust and is best used in 1/16 in. gaps. Because of the pennies' shape and placement on the penny sheets, the smaller gap where the pennies are closer to each other is about 1/16th of an inch BUT the rest of the gaps between pennies are bigger, therefore the need for sanded grout.
Do penny floors hold up?
0:134:07What a penny floor looks like 6 years later - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you can see that some pennies are discolored I mean it's not perfect. But the polyurethane hasMoreAnd you can see that some pennies are discolored I mean it's not perfect. But the polyurethane has has not really screwed up at all it's got a coating on it it's nice coating.
How do you seal a penny wall?
If you have any spaces you need to fill, use your metal cutting snips to cut half pennies to fill in the gaps. Apply a small amount of mastic to the back of each half penny and adhere it to the wall. Be sure to leave enough time for it to dry before moving to the next step.
How do you glue a penny?
Dip the pennies in vinegar for a few minutes to clean them, let them dry and then glue them together with epoxy resin (e.g., Araldite). Avoid epoxy adhesive if you want a reliable bond.
How much does it cost to install a penny floor?
Depending on how you lay your floor, you can expect to spend about $3.00 per square foot in pennies. Don't have that much spare change lying around?
How to glue penny to tile?
Line up the mesh on top of your new template. Use a dot of glue to adhere each penny to the tile one at a time. You can also pre-glue a small section to make it easier. Push your penny down into the glue on top of the mesh backing. Use the penny template underneath the mesh to guide you.
How to keep pennies from coming loose?
It’s inevitable that some of the pennies will come loose. Just save them, and when you are installing the floor you can use a dab of glue or mortar to put them back in place (wear your gloves).
How do I grout a floor with powder grout?
Mix the unsanded powder grout with water according to the package instructions, and then apply into the seams using a grout float. Take your time as you grout the floor. Go slowly and make sure you go at a 45-degree angle so you don’t pull the grout out from between the pennies.
How many pennies are needed to install a penny floor?
Materials to Install a Penny Floor. First things first, there are 304 pennies in one square foot. If you plant to make a 4’x4′ foyer like mine, you’ll need 16 square feet of pennies; or 4,864 pennies; or $48.64 in pennies. Pennies (304/sq ft): You can collect these, ask your friends or grab rolls at the bank.
Can you clean pennies after glued?
Just a tip from experience, don’t try to clean your pennies after you’ve glued them. I read all these techniques for cleaning/shining up a penny and thought it would be a great way to get a consistent look.
How long does it take to glue pennies to the floor?
Here comes the time-consuming part! With the surface clean, you need to glue your pennies to the floor. We recommend using WEST SYSTEM G/5 Five-Minute Adhesive for this – it’s easy to mix, is ideal for spot applications and cures completely in 3-5 minutes.
What to do before you do any real work on your floor?
Before you do any real work on your floor, we recommend reading through everything below and doing a trial run on a test surface with a few pennies and some epoxy. Practice will make perfect!
Do you sand plywood before you stick it to the floor?
If you’ve used plywood, sand this first. Then, before you start sticking anything to the floor, you’ve got to make sure it’s scrupulously clean, so there’s no trace of dust, polish or wax.
Can you pour epoxy over a floor?
You’re going to be pouring epoxy all over your floor later, so it’s vital you use an appropriate sealant to protect the edges of your surface – BEFORE you pour epoxy on. Epoxy will just trickle into any cracks… and once it’s there, it’s not going anywhere!
What glue holds pennies down?
There are a few things that come into play with holding the pennies down. the Weldbond glue that adheres the pennies to the mesh. the thinset mortar the holds the pennies and the mesh to your cement board. the grout between the pennies.
Is it legal to damage a penny?
It is immaterial whether the usage damages the pennies; it is perfectly legal to damage coins. What is not legal is to damage a coin and then attempt to use the damaged coin to commit a fraud. Tiling a floor with pennies is not inherently a fraudulent activity. Read the federal regulations here.
Can you grout penny floors?
If you seal your penny floor with epoxy, the epoxy will harden between the pennies in the same way a grout would. In this case it’s probably not necessary to grout. But, grouting is also an option if you like the look of it — the grout should not affect the epoxy.
Is penny flooring slippery?
Yes penny floors ARE slippery… in the same way that hardwood floors are slippery. It will really be as slippery as the sealer that you use. The sealer I used was a polyurethane for hardwood flooring. It makes it as slippery like a hardwood floor — no more, no less.
Can you use polyurethane on pennies?
Therefore, trying to fill the holes between the pennies with polyurethane is not a great solution. The poly may not dry between the pennies and that wouldn’t be a good thing.
Can you use unsanded grout on pennies?
Michael, I would recommend unsanded grout as it will be less likely to scratch the pennies. In addition, unsanded grout works better in joints that are less than 1/8″ wide so you won’t have any issues if the spacing of your pennies are close together.
How long does it take for Dupont sealer to dry?
Dupont makes a sprayable sealer that is quick and easy to apply. Wait about 10-15 minutes for the sealer to dry, then remove any excess using a dry cloth. Add a second application about an hour later, repeat the cleaning process, then allow 24-32 hours to fully set.
How to mix grout to get consistency?
When mixing grout, follow the manufacturers recommendations to achieve the correct consistency. Lay out an ample amount of grout, then using a rubber float at a 45° angle, work it into the crevices. Change up the direction in which you are spreading the grout to guarantee a consistent application.
What blade do I use to cut hardie boards?
For any round cuts you need to make in the hardie board, (i.e. the toilet flange) use a jig saw with a diamond grit blade. If you need to make straight cuts, consider spending $20 for a cement fiber board blade for your circular saw. It makes easy work of ripping the boards down to size.
Is plywood subfloor hardie board?
But for those of you with a plywood subfloor, in any areas that will come in direct contact with water, it’s super important to install a layer of hardie board. It’s a crazy durable bulding material that protects against moisture damage and mold growth. (Plus, it’s crazy durable and reinforces your subfloor!)
