- Epoxy PVC Nail Hole Filler. The best material to use for this task is a two-part epoxy PVC nail hole filler. ...
- Two-Part Epoxy. If you don’t have a special nail hole filler for PVC, you can always use basic two-part epoxy. ...
- Silicone Caulking. Perhaps one of the best alternatives for filling PVC trim holes is silicone caulking. ...
- Vinyl Spackling. The next material that you can use to fill nail holes in PVC is vinyl spackling. ...
- Wood Putty/Filler. Although this is certainly not the first material that we would recommend using for this task, wood putty or wood filler will do the trick in a ...
- Joint Compound. Another option at your disposal here is to use a simple joint compound. ...
- Bondo. Bondo is another material of choice for this task. Bondo is specially designed as a filler. ...
How to fill nail holes in prefinished white trim?
The materials are given below:
- Putty knife of 2-inch
- White Wood Filling Compound => Check on Amazon=>
- Clean and dry cloth
- Fine-grit Sandpaper
- Hand Sanding Block
How to apply wood filler to fill nail holes?
Things You Will Need
- Paint scraper
- Putty knife
- Awl
- Flat-head screwdriver
- 120-grit sandpaper
- Epoxy wood filler
- Rubber gloves
- Rasp
- File
How do you fill in nail holes?
To fill nail holes, rub a bar of soap over the surface until the holes are filled in. For another quick solution, squeeze white craft glue into the hole. You can also crush an aspirin tablet, mix the powder with toothpaste, and fill the hole with the mixture.
How to fill finishing nail holes before painting?
Squeeze craft glue into nail holes to fill them quickly.
- You can also apply craft glue to the nail holes with a cotton swab.
- Add a sprinkle of baking soda to the glue if you want a filler with a thicker consistency.
- This quick solution can be used for plaster walls and drywall.
What is the best product to fill nail holes in trim?
You can use caulk to fill nail holes in painted trim, but caulk tends to be messier and shrinks more than wood filler, and it can't be sanded smooth like filler can. If you use caulk, make sure it is labeled as “paintable,” and don't leave a smear on the wood surface, which might show up after painting.
What do professional painters use to fill nail holes?
0:331:25How to Spackle Nail Holes before Painting - Sherwin-WilliamsYouTubeStart of suggested clipEnd of suggested clipUse a fiber tape or a reinforced metal patch in the space. Using a larger 3-inch putty knife followMoreUse a fiber tape or a reinforced metal patch in the space. Using a larger 3-inch putty knife follow the same steps of spreading the shrink free spackling into the hole.
How do you fill nail holes in finished trim?
2:314:38How To Fill Nail Holes In Stained Wood Trim - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere's our nail hole close up and as I mentioned before break off a little piece of putty. And justMoreThere's our nail hole close up and as I mentioned before break off a little piece of putty. And just make a little point with it. And then we insert it into the hole squeeze in both fingers.
What do you put on white nail holes for trim?
Use A Putty Knife To Apply White Wood Filler If you want to close large holes in the white trim, you must use a good quality putty knife.
What do you use to fill gaps in wood trim?
Holes in wood trim are best filled with wood filler. Nail holes in exterior surfaces, just as with cracks or gaps, can be dealt with using a good caulking. Take the time before you apply any paint on your next project to fill all of the gaps, cracks, and nail holes.
Is it better to use wood filler or caulk?
You should use caulk to fill gaps or joints between trim pieces and/or drywall. Use wood filler, or spackling, to fill nail holes, dents, and cracks on wood trim. Caulking and filling holes on wood trim takes time. So, don't try to rush it.
How do you hide finishing nails in trim?
1:224:30Hiding Nails - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust scoop it out. Then you can come back in and actually place the nail underneath that's yep. AndMoreJust scoop it out. Then you can come back in and actually place the nail underneath that's yep. And carefully administer a little bit of glue. Right underneath that chip and lay. It back. Down.
Can I use spackle to fill nail holes in wood?
Spackling paste does an excellent job filling nail holes in wood. Simply feed generous amounts of the compound into the nail holes and use a putty knife to spread the paste on the surface to make it flush with the surrounding wood. Once finished, use a damp rag to wipe the excess and let the patches dry.
Are wood putty and wood filler the same?
Wood putty is denser than wood filler, and it's so pliable you typically have to apply it with a putty knife. Like window glazing or plumber's putty, wood putty is a mixture of plastic and oil-based solvents. Because it doesn't harden like wood filler, wood putty won't shrink or crack, but you can't sand it.
Can you use drywall compound to fill nail holes in trim?
To properly fill nail holes, you'll want to use wall putty or drywall compound. Wall putty – A tube of wall putty will do the trick when you're filling in a few holes. Simply dab a small amount on an old knife and push the putty into the nail hole. Let the putty dry and follow the instructions from the putty.
Do you need to fill nail holes before painting?
Painting a wall will NOT cover nail holes, you need to repair nail holes (and even pin holes) before you paint. With the right tools, this job is easy, and your finished paint job will look much more professional.
Why Do You Need to Fill Nail Holes in Your Trim?
The biggest reason you need to fill nail holes is to keep the material looking good. It’s easy for tiny holes to get bigger and scrape away the paint. This is even more problematic when it penetrates the wood, causing the stain to crack and peel. As a result, your trim may look dreadful.
What Tools and Materials are Required for Filling Nail Holes?
When you need to fill trim nail holes, the most important thing to remember is that the product you use will impact the final outcome.
Instructions on How to Fill Nail Holes in Trim in 11 Steps
After you’ve gathered the tools and materials you need, you can then proceed on to filling those pesky nail holes in the trim. Listed below are the steps for filling screw holes properly.
The Process of Painting Over the Holes in the Trim
Learning how to paint trim is a valuable skill to possess because it will come in handy. In order to paint trim properly, you must understand how it is done. Applying paint to this area is a fairly simple process. All you need to do is follow a few steps. Please see the following instructions:
FAQs
The following are some frequently asked questions you may have regarding filling holes in the white trim. Hopefully, this FAQ is helpful to you.
Conclusion
By following the instructions outlined in this article on how to fill nail holes in trim, you should be able to fill the nail holes easily.
How to fill nail holes with spackling?
Press the spackling on the knife into one of the nail holes. Start with the edge of the knife on one side of the hole at a 45-degree angle. Scrape the knife across the surface of the hole to the other side. Press firmly down on the knife so the spackling completely fills in the nail hole.
How to get spackle out of nail holes?
Scoop out the spackle with the end of the knife so it’s easier to press into a hole. Press the spackling on the knife into one of the nail holes. Start with the edge of the knife on one side of the hole at a 45-degree angle. Scrape the knife across the surface of the hole to the other side.
How to get rid of raised edges on trim?
It’s important to get rid of these edges on the trim or they’ll show after you fill the holes. Scrape the putty knife across the surface of the nail hole a few times to smooth out the area around the hole. Be gentle when you’re using the putty knife.
How long does it take for spackling to dry?
Let the spackling dry for 2-3 hours. Check back on the spackling after a few hours to see if it’s dry. If it’s not, let it continue drying. If you notice a dip in the spackling inside the nail hole, apply another coat and wait 2-3 more hours for the new coat of spackling to dry.
How to clean dust off trim after painting?
Any dust particles left on the trim may be visible after you finish painting. Use a paintbrush or cloth to wipe down the surface of the trim, and attach a brush head to the vacuum for the best results. ...
Does shrink free spackling shrink?
Shrink-free spack ling won’t shrink when it dries in the holes on the trim. Avoid spackling that shrinks or you could end up with dips in the holes you fill in. You can find shrink-free spackling online or at your local hardware store. You can use water-based wood filler or even painter's caulk as alternatives.
Can nail holes ruin trim?
This article has been viewed 72,766 times. Nail holes can ruin the appearance of trim on a wall. Fortuna tely, filling in nail holes in trim is a simple process. Before you fill in the holes, you’ll need to go over them with a putty knife and sandpaper to make sure they’re smooth.
How to get nail holes out of wood?
Sand the nail holes. The pressure of the nail gun will cause a “mushroom” to balloon out of the hole. Use 220grit sandpaper on a sanding block to get it smooth with the rest of the board. You’ll remove the primer paint you put on. Step 6. Vacuum dust out of nail holes. …and wipe down with a slightly damp cloth.
How to get mushroom out of nail holes?
Vacuum dust out of nail holes. …and wipe down with a slightly damp cloth. If you leave the dust from your sanding in the holes, it’ll expand when you putty the hole and you’re back to mushroom. Step 7. Use lightweight putty in nail holes. …and let dry overnight.
