- Faux Panels. Faux panels are most commonly faux stone. They are very different from both natural stone and manufactured stone.
- Brick. If you want something that will be a little more sturdy and fireproof, you can build a brick wall behind the wood stove.
- Firebacks. A fireback is usually a piece of steel or iron that sits at the back of a fireplace to protect the wall.
- Heat Shield. Heat shields are available in both metal and ceramic materials. ...
What can I put on the back of a wood stove?
Common fireproof wall ideas for behind a stove include stone, brick and tiles. The look of a wood burning stove can be enhanced by using a faux panel (such as a stone veneer look) or using a fireback. A heat shield can be installed on the back of a stove to help reduce the distances between the stove and any combustible materials.
How do you cover a wall next to a wood stove?
You can use one of three materials to cover a wall that is close enough to a stove to need protection. If you choose 28-gauge steel or asbestos millboard, you need to separate it from the wall by an inch with non-combustible spacers so that air can circulate behind it and cool the wall.
What to do if the wall behind a wood stove gets hot?
It is a common problem: the wall behind the wood stove becomes too hot, which can damage the wall or even burn it. The solution of replacing the back wall with a heat-resistant material, such as heat-resistant stones or a wood stove heat shield, is often cumbersome and not always beautiful.
How do you decorate behind a stove?
To create a focal point behind a stove, install the tiles in interesting patterns, such as a herringbone or chevron design, or inset the tiles in a framed area over the stove. For the modern kitchen consider colored glass subway tiles installed in a straight line arrangement. A tile mural over the stove creates an area of interest in your kitchen.
What material do you put behind a wood burning stove?
Type X drywall is a common material used for wood stove installations. Type X is a gypsum-based drywall that is 5/8 inch thick and is installed on each side of a 2-inch by 4-inch wood stud, spaced 16 inches on center or spaced 24 inches on center.
What can I use for a heat shield behind a wood stove?
A brick, stone or tile heat shield is equally effective but in a different way. These dense materials absorb lots of heat and gradually release it as air circulates around them. The simplest masonry heat shield is a cement board that is separated from the wall by one-inch ceramic spacers.
What can I put on the wall behind my fireplace?
Air barrier material behind fireplaces must tolerate heat. Air barrier material can include thin sheet goods such as rigid insulation, sheet metal, or dry wall. These materials may be installed by insulators, framers, or subcontractors or vendors hired specifically to install the fireplace.
Do I need a heat shield behind a wood stove?
If you are unable to place your stove with at least a 900mm clearance between it and other surfaces, then you'll need to install a heat shield. Situated between the stove and the exposed surface, a heat shield will reduce the required distance for safety.
How do I fireproof a wall behind a wood stove?
Faux Panels. A common way to help protect the wall behind a wood stove and create a backdrop for your stove includes using masonry veneer faux panels. Stone or brick is a common material to use behind a wood burning stove. These panels help create more of a focal point for a room.
How do you protect a wall from stove heat?
If your walls are combustible, you can install a shield on a wall to reduce the stove's clearance area. Like the floor pad, the shield should be made of a noncombustible material, such as sheet metal.
Can cement board be used as a heat shield?
Hardi cement board is an inexpensive solution that will form the foundation of an effective heat shield for any application. Hardi cement board is also designed to have ceramic, porcelain or stone tiles installed over it to cover and beautify the heat shield after it is installed.
How far does a wood stove need to be away from the wall?
36 inches1. Standards for clearances from walls and ceilings that are the basis for many local building codes state that all combustible materials, woodwork, unprotected walls, furniture, firewood, etc., should be no closer than 36 inches to a wood stove.
Can you plaster behind a wood burning stove?
It is important to consider safety alongside design when creating your log burner fireplace. Using wallpaper is not recommended because it will heat up and peel off. Similarly, plastering behind your stove will result in cracks forming due to the heat.
Can you replace a back wall with a stone?
The solution of replacing the back wall with a heat-resistant material, such as heat-resistant stones, is often cumbersome and not always beautiful. An age-old solution is much easier, more beautiful and also easy to remove, namely placing a cast iron fireback against the back wall.
Does a wood burning stove protect the back wall?
Smaller firebacks naturally also offer a certain degree of protection. If the wood-burning stove is in a fireplace, the dimensions and shape of the back wall of the fireplace must be taken into account.
Can an antique fireplace be matched to a modern fireplace?
An antique fireback can be perfectly matched with a modern wood-burning stove and with a modern fireplace and interior. It is also important to consider how imposing you want the fireplace to look.
Why do I Need to Fireproof the Wall Behind a Wood Stove?
You must fireproof the wall behind a wood-burning stove for several reasons. First, the floor protection will prevent the wall from getting too hot and potentially burning or fire hazard. This simple protection can save you and your family from a tragedy.
How to Fireproof Wall Behind Wood Stove
There are a few different ways you can fireproof the wall behind a wood stove. As long as the material you choose is fire and heat-resistant, you will be able to experience the benefits. However, no matter what material you choose, you need to make sure it covers the entire surface of the back of the stove.
What to Put Behind a Wood Burning Stove
There are so many different combustible materials that you can use to fireproof the wall behind your wood stove. Some of these combustible materials include faux panels, brick, a heat shield, firebacks, and more.
Conclusion
If you have a wood-burning stove in your home, you must fireproof the wall behind a wood burning. This can save you from damage to your wall and prevent a tragedy from occurring. You can fireproof the wall in different ways, but the most important thing is to remember to give enough clearance between the newly fireproofed wall and the wood stove.
Why is it important to install a wood stove?
By Chris Deziel. An important procedure, when installing a wood stove, is to provide the proper heat protection for the surrounding walls. Most wall coverings will ignite if the stove is close enough -- even drywall, which is fire-resistant.
Can a wood stove burn a wall?
Michigan State University Extension describes a simple test to determine whether a particular wall needs protection. If you can comfortably keep your hand on the wall while the stove is operating, the wall is probably safe, although it doesn't hurt to protect it anyway.
Can you cover a wall with asbestos?
You can use one of three materials to cover a wall that is close enough to a stove to need protection. If you choose 28-gauge steel or asbestos millboard, you need to separate it from the wall by an inch with non-combustible spacers so that air can circulate behind it and cool the wall. You can also cover the wall with brick, and if you choose this option, you should leave spaces in the mortar for air circulation.
Fireproof Backsplash Behind the Stove
If you're installing a backsplash in several areas of the kitchen, keep in mind that the material chosen for behind and closest to the stove must resist high temperatures. Grease splatters, steam and even heat from the stove and oven could melt or warp inferior materials, such as the average plastic.
Large Metal Backsplash Sheets
Sheets of metal, such as brushed stainless steel or virtually any sheet metal made for backsplashes, are an ideal option for behind the stove, as they resist heat and are among the easiest backsplashes to clean. If you have other stainless steel appliances in your home, a matching backsplash pairs nicely with them for a cohesive look.
Other Backsplash Options
Some peel-and-stick tiles also work well for backsplashes. Select an option specifically made for kitchen use, and make sure it's heat-resistant before purchasing. These are quite easy to install, much like putting stickers on a wall. You'll have to ensure the wall is clean first, or they won't adhere well.
Mediterranean Kitchen with Window Backsplash and Stainless Steel Range Hood
Placing the range hood in front of a window opening is not a common thing, but in this Mediterranean kitchen, it definitely works! The large window serves as a backsplash behind the stove, brings the calm and relaxing feel of the green shades into the room, and provides a beautiful backdrop for the rest of the kitchen.
Rustic Kitchen with Wood Cabinets and Countertop
In this rustic kitchen, wood shaker cabinets are paired with wood countertops and wood backsplash. The large bronze range hood is finished with wood trim. The sculptural shape of the range hood makes a statement. The wood trim is accentuated by a wood backsplash which offers a continuous look.
Backsplash Behind Stove
When designing a kitchen, a backsplash is one of the most important features that bring the whole design together. With endless material, color, and style options, a backsplash can create a big visual impact on kitchen decor.
Transitional Kitchen with White Hexagon Backsplash Behind Stove
This transitional kitchen gives a warm and welcoming feel! White shaker cabinets are paired with quartz countertop, brass hardware, and white elongated hexagon tiles. Wooden floating shelves enhance the warmness of the atmosphere while brass sconces complement the hardware.
White Kitchen Cabinets with Gray Island and Black Soapstone Countertops
In this transitional kitchen design, the white range hood and the beige subway tile backsplash behind the stove create a focal point. The light wood floating shelves next to the hood add visual interest while emphasizing the impact of the accent wall.
How to Choose Kitchen Backsplash Tile Behind the Stove?
When choosing a backsplash behind the stove, there are two important considerations that you need to decide: visuality and functionality. And if you are placing the backsplash behind the stove, the functionality becomes more important.
White Shaker Cabinets with Black Hexagon Backsplash Behind Stove
In this transitional kitchen, the black marble hexagon tile backsplash and the black range hood with metal trim create an accent wall. The black countertop of the white shaker cabinets and the island provides a continuous look with the black accent wall while the cabinets bring a bright look by creating contrast against black features.
Step 1
Use an electric stud finder to find the studs in the wall behind the position that you will place the wood stove. Mark their positions with a pencil.
Step 2
Drill pilot holes through 2-inch by 2-inch by 8-foot pieces of lumber every 12 inches using an electric drill and a drill bit smaller in diameter than the screws. One piece of lumber is required for each wall stud that will be covered by the Hardi cement board. Shorten them if the heat shield will not cover the wall from floor to ceiling.
Step 3
Attach the 2-inch by 2-inch by 8-foot pieces of lumber directly to the wall studs through the drywall using 3-inch drywall screws. Countersink the screw heads into the 2-inch by 2-inch by 8-foot pieces of lumber at least 1/4-inch.
Step 4
Attach ½-inch Hardi cement board directly to the 2-inch by 2-inch by 8-foot pieces of lumber using 1-5/8-inch backer board screws. Apply screws every six inches. Cut each board to width so seams will land directly over one of the 2-inch by 2-inch by 8-foot pieces of lumber.