Time Required
- Look for the damn key. Don’t give up so easily! Did you check that old tool box you never use? All your car’s little storage cubbies?
- Figure out what size socket is ‘close,’ make sure it’s a 12-Point. ...
- Smash that socket onto the locking lug nut with a hammer. I mention this again because it’s the fun part. ...
- Apply leverage. If you haven’t experienced a breaker bar yet, you’re in for a treat. ...
- Revel in your success! Also, inspect the stud for damage. Alright, it worked! ...
- Get the locking lug nut out of your socket. Wedged in there pretty good, huh? ...
What is the best locking lug nut?
- Do not hide the locking lug nut key in your glove box. ...
- Roll up your windows and lock your doors if you plan to leave your vehicle for a long time to prevent theft.
- Park your vehicle in a well-lit area with a lot of traffic. ...
- Invest in a highly sensitive alarm system for your car that will make a loud sound when anyone tries to tamper with it. ...
How to remove lug nut lock without the key?
Time Required
- Look for the damn key. Don’t give up so easily! ...
- Figure out what size socket is ‘close,’ make sure it’s a 12-Point. ...
- Smash that socket onto the locking lug nut with a hammer. I mention this again because it’s the fun part. ...
- Apply leverage. ...
- Revel in your success! ...
- Get the locking lug nut out of your socket. ...
How do you remove damaged lug nut?
The Mechanical Advantage of Leverage
- Breaking Up the Rust Apply targeted, liberal amounts of WD-40 to the base of the lug to allow this penetrating oil to be drawn into the bolt threads ...
- Selecting the Correct Nut Extractor Socket The nut extractor socket needs to be a tight fit onto the lug nut. ...
- Getting the Lug Nut Off
How do you remove a locking lug nut?
What you’ll need:
- Breaker bar
- 12-point socket (size might vary depending on what you have)
- Hammer
- Torque wrench
- A new lug nut
What do you do if you lost your wheel lock key?
0:094:07Option is to get a duplicate wheel lock II get a new wheel lock key that matches. The pattern onMoreOption is to get a duplicate wheel lock II get a new wheel lock key that matches. The pattern on your current wheel locks. Now both of those options can be accomplished.
How much does it cost to replace a lug nut key?
between $20 and $120 per setYou may need to order a new one from the dealer or manufacturer. To do this, you will need the code that corresponds with your particular key. Generally, you can expect to pay between $20 and $120 per set. If your wheel locks came with the vehicle, you can usually find the key code in the owner's manual.
How much is a wheel lock key at dealership?
Some dealers can order a key separately, although it will take some time for it to arrive. Most dealerships will only sell wheel locks as a set. Wheel lock set with the key. The price ranges from $20 to $120 for a set.
Are wheel lock keys universal?
Regardless of whether your car has factory or aftermarket alloys, many of them(the more expensive ones at least) will be sold with some form of locking wheel bolts or nuts. Basically one of the 4 or 5 bolts on the wheel will have a unique pattern on it that a standard socket will not fit.
What happens if you find a wheel lock key?
If you found that the wheel lock key is missing or stripped, or one of the lock nuts is broken, you are not alone. It's a very common problem. Wheel locks. Often a wheel lock key simply wears out from repeated use. When this happens, and you cannot remove the wheel locks with the tools you have, there are a couple of options.
Where are wheel locks installed?
In most cars, wheel locks are installed by a dealership technician during the pre-delivery inspection. One lock nut (or bolt) goes to each wheel. The key and the regular nuts that came from the factory are typically placed in the glove box or in the trunk, sometimes in a plastic case or a little pouch.
How much does a wheel lock cost?
Most dealerships will only sell wheel locks as a set. Wheel lock set with the key. The price ranges from $20 to $120 for a set. You can also order a new wheel lock set online; the prices are also within this range. Many cars have wheel locks supplied by the company called McGard.
Why do you leave the key in the center console?
Many car owners leave the key visible in the center console when they are bringing the car for service, so that the mechanic knows where it is, if needed. This way, when you get your car back, you will know right away if they misplaced the key, which does happen sometimes.
Can a dealer remove a wheel lock?
Dealership mechanics have the manufacturer-specific master set of keys so they can remove your wheel locks. Usually, you don't need an appointment for a simple service like that unless the dealership is very busy. Of course, the dealer may charge you some labor. A dealer should also be able to remove the wheel lock nut if it's broken or stripped.
Can you remove wheel locks without a key?
When this happens, and you cannot remove the wheel locks with the tools you have, there are a couple of options. One option is to call your mechanic or any local auto repair shop. Many mechanics have special tools (sockets) for this purpose, so they might be able to remove the wheel locks without a key. In some cars it's fairly easy, in others it's ...
Do you need regular nuts for winter tires?
It helps if you can find the original nuts still stored somewhere in the trunk. With regular nuts, you don't have to worry about misplacing or breaking the key.
How to remove a wheel nut from a wheel brace?
One end of your locking wheel nut key is likely to have a hole which will fit a standard wheel brace. Slot the other end — the keyed end — onto the locking wheel nut, and turn the wheel brace anti-clockwise until it loosens. Once it’s loose enough, you can remove it with your fingers.
How many nuts are in a car?
Each car has four nuts (one for each wheel) and one key. The idea is that while thieves may be able to remove the other nuts on a wheel, which have standard hexagonal heads, the locking nut is not so easy to remove. The time it takes to force it off may not be worth it due to the risk of being caught.
Where to check for a syringe?
Try checking the following places first: The glove compartment. Under or with your spare wheel – it may be in a separate compartment. In and under the boot — check under the carpet and in all the separate compartments and first aid kit. In and under the seats — check the seat pockets and under the seats.
Can you order a new key from the maker?
Locking nuts are sold with a code, so owners can order a new key from the maker. If you don’t have the code, garages have tools able to remove most nuts. Breakdown organisations such as the AA and RAC can also usually help.
Where to check seat pockets?
In and under the seats — check the seat pockets and under the seats. If you’ve used it since you bought the car and it’s not in any of the above locations, try checking your cup holders, car door pockets, ash tray and any other compartments.
Do new cars have locking wheel nuts?
No, although most new cars will now come fitted with locking wheel nuts as standard. If you’re unsure whether you have locking wheel nuts, try the following: 1. Inspect your wheel nuts — if one has a pattern then this is a locking wheel nut. 2.
How to get a dead locking nut out of a socket?
There are a few ways to get that dead locking nut out so you can use the socket again: Try sticking a screwdriver, chisel or a “straight-punch” style tool into the top of the socket and hammering it toward the locking lug nut. (Ineffective.) Whip the fused lug nut/socket combination at the ground. (Dangerous.)
What to do if you can't find the key?
If you really can’t find the key, it’s time to commit to hammering this sucker into submission. You’re going to simply smash a regular socket onto your locking nut and move it with brute force.
What do lug nuts do?
Lug nuts hold your wheel to your car, so you’ll need to take them off to change a tire or work on your suspension. That’s easy unless one of your lug nuts is a special “locking type.”. Oh, yours is?
Can you use a locking nut removal tool?
Yes, “locking nut removal tools” and kits exist. You can get a socket specifically designed for this task that will probably make it easier, but as you can see in the video we had no trouble at all with a standard 18mm 12-point socket. That’s going to be cheaper and more versatile than a specialized tool.
