GE circuit breaker compatibility chart
| Breakers Name | Ampere Rating |
| Eaton Breakers | 20 Amps |
| Siemens Breakers | 15 Amps |
| Homeline Breakers | 20 Amps |
| Murray Breakers | 150 Amps |
- GE Fits GE. The safest route is to use GE circuit breakers with GE breaker boxes. ...
- Siemens fits GE. Siemens breakers can be used in GE breaker boxes, and they are generally known to be compatible. ...
- Third Party Breakers.
How to identify GE Power break circuit breakers?
- The most common breakers used in homes.
- Protect one energized wire.
- Supply 120V to a circuit.
- Handle 15- to 30-amps.
- Available in three types: Full size (1-inch wide), half size (1/2-inch wide) and twin/ tandem (1-inch wide with two switches and controls two circuits).
Which are the best brand of electrical breakers?
- Features Qwik-Grip technology for fast installation
- Accommodates breakers anywhere within the fully distributed neutral bar
- Comes with aluminum bus bars tested for Homeline circuit breakers
- With Homeline circuit breakers included
- UL listed for residential and commercial power distribution
Are Siemens Breakers compatible with GE boxes?
Siemens breakers can be used in GE breaker boxes, and they are generally known to be compatible. Match the size and voltage requirements when using Siemens breakers, as using the wrong breakers can have dangerous results. This could lead to a meltdown of the breaker box, and even a fire.
Which breakers are interchangeable?
Here's how to replace your circuit breaker:
- Shut off the branch circuit breakers one at a time.
- Shut off the main circuit breaker.
- Test all the wires with a voltage tester to make sure they'redead before proceeding.
- Remove the panel cover.
- Disconnect the wire of the breaker you're removing from theload terminal.
Do Eaton breakers fit GE?
Yes, the Eaton breaker would fit in the space. And the breaker may even have indents to allow it to fit into the slim spaces of a GE panel.
Can you use Square D breakers in a GE panel?
Your breakers. On your panel, we can strike out the Square D breakers immediately. Square D is absolutely opposed to "Classified" breakers. They refuse to make classified breakers for competitor panels, and they object to the use of Classified breakers in their panels (not that they have anything to say about it).
What breakers are interchangeable?
Specified breakers are breakers that have been tested and listed for a panel by the manufacturer. Interchangeable breakers are breakers that have been tested in the panels that they are approved for and are similar to specified breakers, typically by a third party such as Underwriter's Laboratory (UL).
Is GE compatible with homeline?
In short, Square D compatible breakers are Siemens, Cutler Hammer, Eaton, GE Breaker, Murray, Westinghouse, and Home Fitline. Are Homeline and QO Breakers Interchangeable?...Square D Homeline Compatible Breakers.Square D Compatibility TableSiemensCompatibleGE BreakerCompatibleMurrayCompatibleWestinghouseCompatible6 more rows
Are GE and Challenger breakers interchangeable?
If your Challenger model is no longer made, circuit breakers can be replaced with several compatible brands, including GE. Square D circuit breakers, which can be identified via the quintessential yellow "D" logo, may also fit nicely inside your circuit panel.
Are Siemens and GE breakers compatible?
Siemens breakers can be used in GE breaker boxes, and they are generally known to be compatible. Match the size and voltage requirements when using Siemens breakers, as using the wrong breakers can have dangerous results.
Can you mix breaker brands?
Never place a different brand circuit breaker in a circuit breaker panel of a different brand. Contrary to the belief that they are all the same and will work in any circuit breaker panel, the fact is just the opposite. Circuit breakers may actually fit, but not properly.
Can you use GE breakers in a Cutler-Hammer panel?
Re: Cutler Hammer CH vs BR The breakers are physically interchangeable with Homeline, GE, Siemens, Westinghouse, and Murray (a Siemens division), and possibly others.
What circuit breakers are interchangeable with Square D?
Square D QO breakers are compatible with QO breaker boxes and CSEDs. Each ANSI-certified and UL-listed. Homeline circuit breakers are built with the same Square D brand quality you have come to expect at a price that makes them the best value in their class.
What is QO breaker Square D?
Qwik-Open Miniature Circuit Breakers The Square D “QO” line of miniature circuit breakers is their best-known product line. These “Qwik-Open” or QO breakers are the fastest opening breakers in use in the industry. They reportedly open after just one full power cycle of a 60 Hz AC line (about 1/60th of a second).
Which breakers are compatible with Siemens?
The Siemens QP, QT, QAF, and QPF are the standard "interchangeable" plug-on type breakers used in loadcenters under several brand names including Siemens, Murray, Gould, and Sylvania to name the most common. It also fits most Midwest Power and Milbank Mfg metering equipment.
What are breakers on a panel?
Breaker types which are listed on the panel's labeling, these will be made by the same manufacturer and the same type, and UL- listed. Breaker types which are contemporary to your panel's labeling, but again are still the same manufacturer, and they state they will work in your panel, or substitute for breakers which are labeled for use in your ...
Why change out GE bus bar?
Change them out if: They are warmer than the GE's, are melting or deforming on any of their surfaces or are causing or showing any corrosion at their connection to wiring or to the bus bar.
Is Square D a classified breaker?
On your panel, we can strike out the Square D breakers immediately. Square D is absolutely opposed to "Classified" breakers. They refuse to make classified breakers for competitor panels, and they object to the use of Classified breakers in their panels (not that they have anything to say about it). So the Square D "HOMeline" breakers are out-of-place because Square D says so: You are using this breaker in contradiction to its labeling and instructions, which violates NEC 110.3 (B).
Is UL listed a problem?
FYI, UL-Classified is a problem, but UL-Listed is not. UL-Classified is the cheap garbage route by only partially meeting the safety standard in just very specific tests. UL-Listed is the full boat approval of the entire safety standard.
Does Siemens make QO panels?
Siemens does make classified breakers. They make the QD type for Square D "QO" panels, and the MSQ type also for Square D "QO" panels. Now, Siemens' website just burned down so Google is useless (every page is 404). But from Google's view of their pages, it's clear they don't make UL-classified breakers for GE panels.
What Circuit Breakers Are Compatible With Square D?
Siemens breakers can work in the place of square D. The brand has a QD series breaker that can work in square D panels. The breakers are versatile enough to work in most interchangeable panels.
Can You Mix Different Brands Of Breakers?
Square D has warned its consumers against using breakers from different brands. If an accident occurs because you used a different brand, the company may void your warranty. Keep that concern in mind.
What is classified breaker?
A classified breaker is manufactured to generally fit several different panelboards and has met so called standards by a 3rd party like uL Labs for use in different panelboards. Bottom line the Square d homeline breaker shown does not belong installed in that GE panel.
Can a square d qo breaker fit in a homeline panel?
Only square d qo breakers will fit in that panel period,The homeline panels will fit other breakers but it shouldn't be done except in a temp/emergency situation.
What does specified breakers mean?
Specified breakers mean the manufacturer has tested the breakers in the panel and listed them to be used in that panel. You have probably noticed “UL Classified” and interchangeable circuit breakers around the market.
Is using breakers not listed or labeled a violation of the electrical code?
They site the National Electrical Code (NEC) Section 110-3 (b), which states that using breakers not listed or labeled is a code violation. Their argument is for public safety drawing evidence from past accidents due to the use of Classified breakers in their panel.
Can you use UL classified breakers in panelboard?
Otherwise, just replace the same type of existing breakers in the box. Manufacturers would want to specify their own breakers for use in their panelboards for obvious financial reasons. However, remember you have options with UL Classified breakers like the chart above. Some electricians use Classified breakers for obvious reasons, whether for price, availability, or convenience. But which ever circuit breakers you go with, make sure to install them safely.
Can UL Classified breakers be used for panels?
These breakers meet UL and NEC code regulations. UL has stated that people must adhere to all manufacturer supplied instructions. Moreover, UL also stated that Classified breakers can be used for their approved panels. ( Source: UL Marking and Application Guide Panelboards ). On the note of warranty void, manufacturers cannot void their warranty if the replacement part has proven to be safe by a third-party, for instance UL (Magnusson-Moss Warranty Act).