what are the parts of a deadbolt lock

What are the parts of a deadbolt lock?

• Thumb-latch / Thumbturn. The thumb-latch (or thumbturn) is the part of your deadbolt inside your home that you use to lock and unlock your deadbolt.
• Deadbolt. The deadbolt is the piece of the lock that secures your door shut.
• Turnpiece / Tailpiece.
• Keyhole.

Full Answer

How do you unlock a deadbolt lock?

• Hold the chain lock in your hands.
• Lift the chain out of the metal casing.
• Open the door.
• Open the door from the outside.
• Slip your hands through the door and wrap one end of the rubber band around the chain lock as close to the metal casing as possible.

How do I drill out a deadbolt lock?

• What You Need 1. Drill driver and drill bit 2. Flathead screwdriver 3. Center punch and Hammer 4. Protective Goggles
• What to Do Step 1: Check if your lock can be drilled or not Step 2: Place a center punch above the keyhole Step 3: Drill a hole through the ...
• Conclusion

What are the benefits of a deadbolt lock?

This can give you extra peace of mind:

• On vacation with the family
• At work, whether a day or night shift
• When the kids are at home alone or with a sitter
• While you run errands
• When guests are using your house
• And more…

How to open a deadbolt lock without a key?

• Pick the lock
• Drill the lock at the shearline
• Bypass the lock using a special tool (potentially)
• Use a utility blade between the door and jamb and “walk” bolt back into the door.
• Sledgehammer to deadbolt body
• Use a “ramset” gun (gunpowder actuated nail gun) to punch the core of the lock through the entire door.
• Thermite

More items...

What are the names of the parts of a door lock?

The main parts of a door lock are the cylinder, bolt, box and strike plate. It's useful for any DIY-er to know how things around the home operate.

What is the deadbolt hole called?

The bore hole simply put, is the large hole drilled in a door through which the main assembly of a knob-set is installed. A deadbolt is a locking mechanism that mounts much like a door knob.

What is a lock jamb?

strike jamb, lock jamb The vertical member of a doorframe on which the strike plate is installed.

What is a strike plate?

Strike Plate This is the plate the latch-tongue, or deadbolt-tongue will connect with. It should sit flush with the door jamb. Any passage or privacy set needs to have a strike plate for the door to latch. Additionally, deadbolts need a strike plate to properly lock.

Parts of Deadbolt Lock

You are familiar with thumb-latch or thumb-turn if you have a single-cylinder deadbolt. It keeps the door locked and unlocked, depending on which direction you turn it. Deadbolt locks that have a thumb-latch can be easily opened and closed.

Types of Deadbolt Door Locks

A single cylinder deadbolt has a keyhole on the outer side and a thumb turn on the inner side of the door. Once turned, the deadbolt lock is inserted into the strike plate or released from it.

How Does a Deadbolt Work

When unlocking a door with deadbolt, you will need a key. There are pins of different sizes inside the lock’s cylinder. At the top of the pins are springs that keep them in place. Once you insert the correct key, the pins will align.

Pros of Using a Deadbolt Lock

One of the benefits of using deadbolt door locks is that they are challenging to break through. Because they are made of machined steel, they cannot be easily broken compared with traditional locks.

Cons of Using a Deadbolt Lock

If you are using a double cylinder deadbolt lock, it takes time before you can get out of the room since you still have to insert your key. This delay can be dangerous, especially if a fire breaks out and you have children with you.

Frequently Asked Questions

This kind of deadbolt is called a double cylinder deadbolt lock. A key can open it from the inside and outside. It offers better security compared to a single-cylinder deadbolt lock.

Conclusion

Choosing the best deadbolt lock for your door is easy if you fully understand what is a deadbolt lock. Compared to traditional locks, a deadbolt lock cannot be easily opened. Deadbolt locks can be a single cylinder, a double cylinder, or a touchpad.

What is the keyhole on a deadbolt?

The Keyhole: The Keyhole itself is where the key inserts, allowing users to operate the lock. These are a few of the most important parts of the deadbolt. Each part plays a role in how the locking mechanism works.

What is the bolt on a door?

The Bolt: Also called the latch, the bolt engages the inside of the door. There is a piece of metal that extends from the door into the frame itself. This bolt is used to hold it closed. The Box: The bolt extends from the cylinder into a hole that is designed to fit the bolt perfectly. This is called the box.

What type of locks are used in residential homes?

Traditional and electronic locks. Many residential homes, apartments, schools, libraries, small commercial buildings and other similar spaces still use traditional key-and-doorknob locks for both interior and exterior doors. Traditional locks, also known as mechanical locks, while still popular today, are not the only type of lock available.

What is the plate behind a door?

The plate behind the door can refer to two separate pieces of metal. The first option is the strike plate, which is discussed above. The strike plate keeps the bolt in place when it is locked. When it closes, the latch strikes the plate and holds it closed. The other option could be the rosette.

What is a strike plate?

The strike plate is the metal that is attached to the doorjamb itself. There is usually a set of holes into which the bolt of the inserts. When the door is closed, the bolt extends into the hole. It is the job of the strike plate to keep it closed. The strike plate itself protects the rest of the structure against friction.

What type of technology does a lock use?

Recently, lock manufacturers have taken to incorporating smart technology into their electronic locks. Smartphone use or voice control are more advanced ways of opening a door that omit the need for a key.

What is the second part of a key called?

This slides into the lock itself. Locks are shaped to distinguish between various keys so that it only unlocks for the right key. The second part of the key is called the bow.

1. What is a deadbolt lock?

This is a beneficial lock bolt designed to be moved via turning the key or preferably accessing the control system without a spring. This tool comes with a durable bolt which should get activated using your thumb turn if not the key.

2. How does this deadbolt lock operate?

Deadbolt locks work without spring usage, only extending the bolt right into the strike plate or key retracts on your door frame. And because they are not spring –functioned, this design makes them harder to get broken.

3. The main parts of this deadbolt lock

Bolt – Right inside our doors, this bolt moves out and into of door flame to effectively secure it when it closes. Thus, deadbolts come with a guard bolt or plunger designed to stop the lock from being levered.

4. What are the main types of deadbolt?

Double cylinder deadbolt – This deadbolt lock is designed to get activated via the key from the two sides. Besides, this type can get utilized in situations where there easily breakable glass closes to the knob. Further, it should get fixed within 40-inches of a specific lock.

How can you make your deadbolt more secure?

Securing a deadbolt is all about the robust hardware that surrounds it. For some of us with powerful deadbolts, we need a robust frame door as a week. It might be a bit challenging to fasten a sturdy deadbolt on the flimsy door. Further, you can also consider getting a solid-core door for the entire home and reinforce your door frame.

What are the top features of a safe deadbolt lock?

The main bolt should extend to one crawl in length and be made from hardened steel. The connecting screw should be right on the inside and manufactured from solid steel.

What are the benefits of deadbolt locks?

The unique and valuable locking mechanism provides the user with utmost protection against any forceful physical attack. The deadbolt lock needs a lot of time to successfully break-in, tougher to open.

What are the parts of a deadbolt?

The deadbolt lock parts generally include Thumbturn, Deadbolt, Turn piece and keyhole. 1.Thumb-latch / Thumbturn: It is the part of the deadbolt in your house used for locking and unlocking a deadbolt. 2.Deadbolt: It is the section of your lock that assures the security of your door.

What is a deadbolt lock?

A deadbolt lock is operated through movements of a key or an access control system without a spring. If compared to the standard spring latches, deadbolt locks are heavier and thicker. Normally, the deadbolt locks are composed of steel or brass without a rounding or angling pattern at the end of the lock.

What is the keyhole on a deadbolt?

Instead of the thumb latch, the August lock will be joined at that point. 4.Keyhole: The Keyhole itself is where the key inserts, allowing users to operate the lock. These are a few of the most important parts of the deadbolt.

How many screws are needed to unfasten a deadbolt?

The screws associated with the deadbolt are needed to be unfastened now. The deadbolt front has two screws that need to be removed. The portion where screws have resided is called faceplate. Then you will need to remove the interior portion of the faceplate.

How much does a steel deadbolt cost?

Deadlock/Deadbolt: The good quality steel locks cost around $50 to $75 without labor costs. The place from where you buy it and the type of deadbolt also affect the cost of the deadbolt. This is not a high cost for a heavy-duty lock, especially if you have all the necessary tools to install further.

What is double cylinder deadbolt?

While both kinds of cylinders function as premium security measures, a double-cylinder deadlock provides the maximum protection because there is only one way to open a door compared to the two . Homeowners are advised to use a double-cylinder unit for a door with windows.

How does a door lock work when you unlock it?

When you unlock a door, you insert the key in the lock cylinder and turn it. This turning movement of the key induces the shifting of a series of pins present in the cylinder. The process of ‘re-keying your lock involves the resetting of these pins present in the cylinder.

What are the parts of a deadbolt?

Deadbolts comprise various parts, including a lock cylinder, pins, springs, faceplates, screws, an anti-drill ball bearing, bolt hub, thumb turn, and other parts. All these parts work together to provide one of the most reliable keyed entry locking solutions available today. While there are different deadbolt brands in the market, Schlage is one of the most established. Schlage deadbolts are a favorite for many businesses and homes.

Do you need to replace a Schlage deadbolt?

You may also need to replace certain parts of your deadbolt locks to ensure a better fit on your door. For instance, longer screws are perfect for securing your deadbolt on your door. Another situation is when the lock bolt and the strike plate attached to the doorjamb no longer align. The door hinges may also shift slightly and cause these Schlage deadbolt parts to misalign.

What is the cylinder of a lock?

Cylinder. The cylinder of a lock is the part that contains the locking mechanism. It is the main body of the lock and is therefore sometimes referred to as the ‘lock body. Cylinders are spring-loaded with a series of pins that will not turn unless they are pushed in the right direction and pattern by the correct key.

What is a bolt on a door?

These bolts are fitted on the side of the door where the hinges are as an additional means of security . They help to prevent doors from being forced off their hinges in the event of an intrusion. This type of lock can be used on any wooden door and consists of a hardened steel bolt that protrudes from the door frame and locks into a hole in the door when it is in the closed position.

What is barrel bolt?

Barrel Bolt. A barrel bolt has one long metal cylinder in a horizontal position which can be guided by a thumb push to lock or unlock the door. The bolt will engage with a matching metal cavity on the door frame when locked and be drawn back into the faceplate when unlocked.

What is a padlock used for?

It is commonly used to lock sheds, garages, gates, or commercial buildings. A padlock is a removable device with a slot that is inserted through a loop and secured into place.

What happens when a spring bolt is released?

When the spring is released, the bolt will revert to its natural position of being locked. This means that when the door shuts, the spring bolt will automatically lock itself without requiring a key.

How does a spring bolt work?

A spring bolt is also known as a latch bolt. It works with the use of a spring clip that holds the bolt in place. The spring is compressed when being unlocked, thereby drawing the bolt into the body of the lock and allowing the door to open. When the spring is released, the bolt will revert to its natural position of being locked. This means that when the door shuts, the spring bolt will automatically lock itself without requiring a key.

What is the spindle on a door?

Spindle. The spindle is a part of the lock which connects the door handle or knob on either side of the door. It is a square-shaped rod that releases a latch inside the door to allow it to open when the doorknob is turned, or the handle is pushed down.

Single Cylinder Deadbolt

The most common type of deadbolt lock is a single cylinder deadbolt lock. You can mount this type of lock inside your door. The Interior of this type of deadbolt lock includes a twist doorknob that you can see from the internal side of the door. Its exterior part has a key cylinder that you can see from the outside of the door.

Double Cylinder Deadbolt

It is a problem solver for the type of single-cylinder deadbolts. It is called a double cylinder deadbolt because it has cylinders on both sides. Just like the single-cylinder deadbolt, it also needs internal mounting in the door.

Lockable Thumbturn Deadbolt

Thumbturn deadbolt is a mingling type of both above types that we talked about before. It is mostly called a thumb turn lock that has a thumb turn in it. On the inside face, it has a thumb turn that works similar to the single deadbolt lock. This lock provides an exceptional feature that can be useful to lock it with a key.

Keyless Deadbolt

This lock is very convenient and stylish in its looks because it has an incredible unlocking mechanism. Just like its name, it works without any key. You get a keypad to unlock it instead of a keyhole. You need to enter the secret pin which you have chosen or code for unlocking. Of course, you will choose that particular pin for opening it.

Rim Deadbolt

This lock stays on the right side of the door from the inside face. You do not need to lock it yourself because it automatically locks the door when you close it down. So, you are safe from letting the door accidentally open. You also do not need to check it after some days because it works pretty well.

Vertical Deadbolt

As with most lock types, this one type works by bolting it to the inside face of the door. The position may be different from the other types. It stays on the top of the door, and it is almost impossible to unlock it from the outside. Intruders may get access to the horizontal deadbolts but not the vertical ones.