What are Barge Boards?
- Step One. Barge boards are decorative features which are mounted on the gables of the house, following the pitch of the roof.
- Step Two. These decorative features are also known as fly rafters or gable rafters. ...
- Step Three. ...
- Step Four. ...
- Step Five. ...
Where is the barge board on a house?
In this manner, where is the barge board on a house? Bargeboards refer to the fascias located at the gable end or side of a roof. Used to protect the roof timbers of a building, bargeboards can also have a significant impact on the general aesthetics of the exterior of your property. How do you replace a barge board?
What are the different types of barge boards?
There are different types, naturally, such as square, bullnose and flat. Materials available are wide and varied so you will never be stuck for choice. Maintaining your barge boards is simplicity, but a common mistake is simply placing new boards over old.
What are bargeboards and why are they important?
What are Bargeboards? Bargeboards can have a large, visual impact on a home being attached as they are to a roof’s gables. Of course, this is intentional since the primary purpose of bargeboards is to make that part of the roof / building look better.
What is a bargeboard gable?
Bargeboard is exterior house trim, usually ornately carved, that is attached along the roof line of a gable. Originally, this Victorian wood trim — also called vergeboard or verge board (verge being the end or edge of a thing) — was used to hide the ends of rafters.
Where are bargeboards located?
What is fascia board?
About this website
What is the difference between fascia and barge boards?
Barge boards and fascia boards are very nearly the same thing. They are both long, straight boards that run along the lower edge of the roof. However, fascia boards run horizontally, carry the gutters and support the bottom row of roof tiles. Barge boards run diagonally and are located at the gable end of a property.Mar 29, 2021
What are barge boards and soffits?
Bargeboard. This is the board that is used on the gable end of a house. The condition of the bargeboard can often make or break the look of a house, and over the years it has evolved into some very attractive shapes. Soffit. The soffit board is tucked away under the fascia board.
What are the boards around a house called?
However, fascia around your house is more or less a horizontal board that covers the exposed trusses or roof rafters at the point where the walls meet the rooftop. Many homeowners do not realize that fascia even exists on their home, because it is often covered up by gutters.Jun 17, 2019
What is the difference between a soffit and a fascia board?
The soffit extends from the side of the structure to the edge of the eave. Fascia is used to create a barrier between the edge of the roof and the outside. It creates a smooth appearance to the edge and protects the roof from weather damage. Fascia also provides a point for the gutters and drain pipes to attach to.
How do you fix a barge board?
2:4614:03Rebuilding Traditional Barge Boards - DIY Dry Verge - YouTubeYouTubeStart of suggested clipEnd of suggested clipEspecially in nice straight lengths. So what i ended up doing is putting a join in about a third ofMoreEspecially in nice straight lengths. So what i ended up doing is putting a join in about a third of the way down that was the most efficient use of the lengths i had.
What is a barge board on a shed?
Barge Boards Used to finish off the roof apex of each shed.
What is a barge on a roof?
Bargeboards refer to the fascias located at the gable end or side of a roof. Used to protect the roof timbers of a building, bargeboards can also have a significant impact on the general aesthetics of the exterior of your property.
What wood is used for barge boards?
The most popular wood species for fascia, soffits and barge boards are; Western red cedar, European oak, Douglas fir and Larch. Accoya fascia board is a highly recommended sustainable option that is extremely durable. Utile or Iroko fascia, barge and soffit boards are also very good options.
Are fascia boards necessary?
While a fascia isn't always necessary for a home or roof, soffits generally are. Without a soffit, not only would the home not have a finished appearance, but the rafters and eaves would be exposed to the elements, and at risk for problems like wood rot, interior leaks, mold growth, and roof deck failure.
How do you attach a barge board?
1:463:07DIY Remove & Replace Damaged Barge Boards - YouTubeYouTubeStart of suggested clipEnd of suggested clipEnds. We can then attach the board using tech screws and rubber washers on the side. And at the topMoreEnds. We can then attach the board using tech screws and rubber washers on the side. And at the top the tech screws will drill their own hole into the wood.
What size is a barge board?
Typically, you will find a 5.5 inch by 3/4 inch barge board which is commonly known as a one by six. The 1×8 or 1×10 may also be used depending on the type of construction. You may see a 2×4 used in some of the lower quality construction.Jan 11, 2021
What is a barge rafter?
A barge rafter is at the outdoor roof rafter, generally at the overhang of a gable. This ends up being the fascia board for the gable. A barge rafter can be molded or flat. The barge rafter has a completed piece connected that is called the barge fascia.
What is a bargeboard?
Bargeboards refer to the fascias located at the gable end or side of a roof. Used to protect the roof timbers of a building, bargeboards can also have a significant impact on the general aesthetics of the exterior of your property.
Why do you need bargeboards on your roof?
A major functional benefit of bargeboards is that they will keep your roof lining dry and free of any gaps or holes around the edges of your roofing. The main benefit of adding bargeboards to your property is for aesthetic purposes, however, adding a great look and character to the roofline of the property.
Can bargeboard be replaced?
In short, yes, bargeboards can be replaced if they are damaged or look old and worn on the side of your building. However, the tiles that are cemented in place and attached to the bargeboard may also need to be replaced before fitting your new bargeboard – this entirely depends on the condition of the fascia and the roof timber underneath. A scaffold tower should be used in order to carry out this work safely.
What is bargeboard in architecture?
Definitions of Bargeboard. "A board which hangs from the projecting end of a roof, covering the gables; often elaborately carved and ornamented in the Middle Ages." —. Dictionary of Architecture and Construction.
Where is bargeboard found?
Examples of bargeboard can be found on the Helen Hall House in West Dundee, Illinois (c. 1860, remodeled c. 1890) and a typical Victorian-era residence in Hudson, New York. Used as ornamentation, bargeboard must be maintained and replaced to keep the Victorian-era look on today's historic dwellings.
What is the verge board on a gable roof?
It hangs from the projecting end of a gable roof. Bargeboards are often elaborately hand-crafted and found on homes in the Carpenter Gothic style and what is commonly known as ...
What is a barge couple?
In roof construction, a barge couple or barge rafter is the end rafter; a barge spike is a long spike used in timber construction; and a barge stone is the projecting stone when a gable is built of masonry. Bargeboard is always placed up near the roof, on the piece of roof that overhangs to form a gable.
What is bargeboard trim?
Bargeboard is exterior house trim, usually ornately carved, that is attached along the roof line of a gable. Originally, this Victorian wood trim — also called vergeboard or verge board ( verge being the end or edge of a thing) — was used to hide the ends of rafters.
Do bargeboards have to be replaced?
In older homes, bargeboards may have already disintegrated, fallen off, and never replaced. The 21st century homeowner might consider adding this detail to restore a historic look to a neglected gable. Look at he many books that illustrate historic designs, and either make it yourself or contract out the job. Dover publishes several books including 200 Victorian Fretwork Designs: Borders, Panels, Medallions and Other Patterns (2006) and Roberts' Illustrated Millwork Catalog: A Sourcebook of Turn-of-the-Century Architectural Woodwork (1988). Look for books that specialize in Victorian designs and house trim, especially for Victorian Gingerbread details.
Can you remove bargeboard from a Victorian house?
Maintenance of Victorian Wood Trim. You can remove rotten bargeboard from a house without harming the structural integrity of the roof. The bargeboard is ornamental and is not necessary. However, you will change the appearance — even the character — of your home if you remove the bargeboard and do not replace it.
Barge Board Uses
The main purpose of the barge is to tie the roof stringers together across the eve, while also providing a bold architectural look.
Barge Board Materials
The most common materials for barge boards are real wood, fiber cement, and OSB based products.
Real Wood Materials for Barge Board
Using real wood for exterior trim such as barge board has real advantages.
What is barge board?
Barge board has a special significance in New Orleans. The boards, usually undesirable, over-sized, roughhewn lumber, were reused from flat boats or barges that carried cargo down the Mississippi River to the port of New Orleans. There was no economical way to send the barges back up river, so they were disassembled and sold as cheap lumber. This affordable building stock found its way into many Creole cottages and shotgun houses built in the nineteenth century in New Orleans. What was once considered a less desirable form of wood has become a prized historic building material that brings character to many homes in neighborhoods such as the Marigny, Bywater, and Trem neighborhoods.
How thick is a barge board?
Barge board is a softwood, usually poplar or pine, about 2” thick and anywhere from 1’-0” to 2’-0” wide and can be over 20’-0” long. There are holes throughout boards to allow room for the rope that lashed them together. For single story construction, the boards are stacked vertically on a sill.
How long does barge board last?
Although barge board is a sturdy material that has lasted over two hundred years, please do a thorough inspection and consult with a contractor regularly during renovation to identify any structural deficiencies and areas that may need repair. See the following for more information: Megan.
Do barge boards have cavities?
However, barge board construction does not allow cavities for modern conveniences such as plumbing, wiring and insulation. If necessary, 2 x 4 studs can be added to provide the necessary space, straighten a barge board wall, or add additional support if the bottom of the boards are deteriorated.
Can bargeboard be brushed?
Some prefer to remove the wallpaper and celebrate the primitive look of bare bargeboard. In this case, the wood can be wire brushed, and lightly sanded to bring out the grain and color; the wood is then sealed.
What is the purpose of bargeboards?
Of course, this is intentional since the primary purpose of bargeboards is to make that part of the roof / building look better. Of course, they also serve a more practical function in that they cover any exposed materials and help protect them. Normally made from wood, they can be matched in colour and pattern in order to suit the home.
What are fascias, soffits and barge boards?
What are Fascias, Soffits & Barge Boards? There are three additional parts to a traditional roofing system that help to tie everything together, add to visual appeal and help prolong the life of the roof and, ultimately, the building itself.
What is bargeboard made of?
Traditionally, bargeboards were made from wood. However, modern varieties are mostly built from uPVC. uPVC is low maintenance and offers excellent resistance against UV and weather exposure. It can also be coated in woodgrain foil finishes, giving it the appearance of timber if desired. Many people choose decorative bargeboards to enhance the aesthetic of their home, although there are other decorative products that you can use to visually enhance your roofline.
Where are fascia boards located?
Bargeboards run diagonally and are located at the gable end of a property .
What is Eaves Protection System (EPS)?
This is a bent length of plastic that is tucked under the roof tiles and over the gutter. It works by stopping water from dripping or splashing behind the gutters, diverting it into them instead.
What is the best material for fascia boards?
uPVC is the most used material for fascia boards and with good reason; it requires virtually no upkeep and is designed to resist warping, peeling and discolouration even after extensive weather exposure.
How many RAL colors are there for fascia boards?
When deciding on a fascia colour, many of our customers ensure it complements the aspects covered above. As our fascia boards are available in more than 150 RAL colours, we make it easy for them to do this too. However, if you’d prefer it if replacement fascias did not match them, this is possible too.
Can you replace fascia board without removing gutters?
As gutters are fitted to the fascia boards, it is not possible to replace the fascia without removing the gutters first. For this reason, it makes sense to install new guttering whenever new fascia boards are required.
What is the board on the roof called?
What are Fascias? The fascia board is the one mounted at the point where the roof meets the outer walls of the house and is often called the ROOFLINE. However most people refer to it by the name of the main board that carries the gutter – the fascia or fascias.
Where is the soffit board?
The soffit board is tucked away under the fascia board. It is usually the board that you see most of from street level. The soffit can be ventilated to allow the flow of air into the roof area. Alternatively, ventilation can be provided over the top of the fascia board.
Where are bargeboards located?
Bargeboards refer to the fascias located at the gable end or side of a roof . Used to protect the roof timbers of a building, bargeboards can also have a significant impact on the general aesthetics of the exterior of your property.
What is fascia board?
The fascia board is the long, straight board that runs along the lower edge of the roof. In a downpour the roof of a 3-bed semi could be washing several gallons of water per second into its gutters. Bargeboard. This is the board that is used on the gable end of a house.
