How to Build 3 Hole Washer Boards:
- Cut wood for the frame Cut your 2×4’s for the frame – You’ll need 4 that are 48 inches long and 4 that are 13 inches long. ...
- Cut the rest of the wood Cut your sheet of plywood for the surface. ...
- Next, lay two of your longer pieces of 2x4s and two of the shorter pieces on top of one of your plywood pieces to form a box shape. ...
How to make 3 hole washer boards?
Step 3: Step Two
- cut the cheap 1"x2" to around 2" chunks
- align the 4" pipe with the hole on the plywood
- with wood glue, use three 1"x2" chunks and secure them around the ABS with a brad nail gun or staples
- do this for all of the holes
- attach the 3" board to the bottom of the 2"x4" framecarefully, using 1 1/8" screws, secure the plywood to the 2"x4" frame
How to build a table over a washer?
Laundry folding table over your washer and dryer. To build this, you will need two sheets of 4′ x 8′ x ¾” plywood. Cuts: (1) 30″ x 86″ for the counter. (3) 29″ x 41 ¼” for the sides. (2) 26 ¼” x 18″ for the shelves. (1) 4″ x 86″ for the counter back (I pieced together scrap ply to make this)
How to make your own rubber washers?
Tools:
- Metal Lathe
- Single-edge razor blade (preferable new), a utility knife blade would be effective as well
- Locking Pliers (Vice-Grips®), small-type
What size are washer boards?
Step 1: The Goods
- 24 feet of 2x4
- 45 inches of 3/4"x3"
- sheet of plywood cut to 16"x48" (two of these)
- 4" ABS pipe
- outdoor carpet
- eye screws or tie down rings
- rope or chain
- 3" drywall screws
- 1 1/8" drywall screws
- spray adhesive
What kind of carpet do you use for washer boards?
Use Astro Turf, or basically really thin outdoor carpet to cover each washer box. The carpet can be applied with 3M Spray Adhesive. This will keep the washers from sliding and bouncing as much.
How far apart should washer boards be?
about 20 feet apartWasher boards and boxes are typically positioned on flat surfaces about 20 feet apart. If you would like to give yourself and your friends more of a challenge, you can space them out even farther. Washer toss can be played in teams of one or two players.
What size are washers for washer boards?
Two sets of three standard 3" washers are required and each set must be of a different color or somehow marked differently. Contestants may use their own washers as long as each washer is at least 2 15/16" in diameter and weighs 4 1/2 ounces or less.
What are the dimensions for washers game?
16 by 16 by 4 inchesWasher pits and boxes vary in size and shape, but a standard for one-hole washers is 16 by 16 by 4 inches (410 mm × 410 mm × 100 mm), with a cylindrically-shaped cup ( 41⁄2 in [110 mm] in diameter and 5 in [130 mm] in height) located in its upper surface.
How do I make a hillbilly horseshoe?
0:058:34First thing I'm going to do to create the washer board is to get a sheet of OSB plywood you couldMoreFirst thing I'm going to do to create the washer board is to get a sheet of OSB plywood you could probably get by with a half of a sheet. But. It's pretty inexpensive. So I just bought a whole sheet.
How do you make a single hole washer board?
0:394:30Cut two pieces of 3/4 inch plywood. You can also use half inch plywood that would work if that's allMoreCut two pieces of 3/4 inch plywood. You can also use half inch plywood that would work if that's all you have my plywood is 16 inches square find and mark the center of the plywood squares.
What is the distance for washer toss?
The game field consists of two washer pits, each containing one recessed cup of 4 inches in diameter (101.6 mm) positioned a specific distance apart, toward which players throw washers to score points. The official distance, from cup centers, is 25 feet (7.62 meters).
What is the best way to throw washers?
Toss the washer towards the opposite box so it lands close to the cup. Have each player toss a washer at the box before checking whose is the closest. The person whose washer is the closest to the cup gets to go first. This initial throw is also known as a "diddle."
How do you make a washer game box?
1:169:21I used a piece of half-inch plywood mitt to make up the bottoms of the game boards. And cut two ofMoreI used a piece of half-inch plywood mitt to make up the bottoms of the game boards. And cut two of them at 16 inches square on my table saw a circular saw would work just fine for this as well.
How far apart are 3 hole washer boards?
How to Play 3 Hole Washers. Place your boards 10 feet apart on level ground (this is the official distance, but can be changes for your game if you'd like). This is your game field. Each individual or team throws 4 washers (one at a time), and the object of the game is to score 21 points first.
How to make a sandbox?
1. Gather your materials. Head to your local hardware store for two 6-ft two-by-fours, two 17-by-17-inch squares of plywood, two 14-by-14-inch squares of carpet (or fake grass) and two 3.5-inch pieces of PVC pipe, each with a 4-inch diameter.
How to play a board game outdoors?
Because the game is usually played outdoors, make sure you create a durable box able to withstand the elements as well as the pounding from the game itself. If you will be playing at a specific location, make sure to measure the dimensions to create a suitable board.
How to make a square frame?
Screw the square frame together. Make sure the wood screws you use are long enough to pierce both pieces of two-by-four at each corner. Use a power drill to ensure that the ends are firmly locked together. Measure and cut a piece of square plywood. Create the square piece of plywood to fit beneath the square frame.
How many points do you get in a washer board game?
Here are some basic rules for playing three-hole washer board game: If you get your washer in the hole closest to you, you’ll get one point. The middle hole is worth three points and the hole farthest from you is five points.
How many washers per player?
Basically, the board consists of four holes close to each corner of the board with one hole in the middle. You’ll need to use six washers per player.
How many washers do you need to throw in a round of golf?
The first player throws both of them, one at a time. The scoring is determined by the proximity of the washer to the cup. Only one player can score per round.
How far apart should you measure a washer pit?
Washer pit distance. The distance between the two pits is completely up to you. Most players recommend that you measure a distance of 25 ’ from the center of one cup to the center of the other. Of course, the greater the distance, the more difficult the game.
How many bags are in a pitcher box?
The same rules apply as for the singles play and each player has 4 bags to pitch. Official rules for playing washers state that the player must pitch with the underhand throw.
How far should a box be from a thrower?
The distance between the boxes should be approximately 20 feet. Most of the time players determine the distance by using a string, a rope or a chain attached to the front of both boxes. The thrower should be standing next to or behind one box while tossing washers toward the other.
Repurpose a vintage washboard to create an organized memo station
Household notes will stay put on a washboard memo station that doubles as a handy cupboard.
Project Directions
Measure washboard from bottom of legs to about an inch from the top. Cut two pieces of the 3/4-inch wood to that length for the sides of the cupboard.
How long does it take to paint a woodshop?
Estimated time to complete: 2 hours, plus time for paint to dry. Woodshop safety: Always wear proper eye, hearing and breathing protection when working with power tools or hand tools, and always work on a stable surface.
How to make a square with 2x4s?
Step 1. Cut the 2x4s and plywood to size and sand them smooth. For each box, position four 2x4s (two 16-inch lengths and two 13-inch lengths) on a level surface with the narrow edge down and equal-sized boards at opposite sides to create a square. To hold this together, a couple of clamps should work.
How many washers do you throw in a round?
Each player throws their washers from the same side over to the opposite board (facing longways). The player who throws first will throw all four washers, then the second player throws their washers. The player that scores the most in each round gets to throw first on the following round.
How many washers does a player throw in a game?
First player throws four washers, then the first player from the opposite team throws their four washers. Opposing team members now pick up the washers and throw them back in the same fashion. The team that scores the most in each round gets to throw first on the following round.
Can you cut half sheets at a hardware store?
Most hardware stores will also sell half-sheets, or can custom cut for a small fee. I use either a table saw or skill saw for this cut. However if you’re not comfortable with power saws or limited on transportation space, take advantage of the the cut services from your local hardware store.