Official game board specifications. Washers has many different boards of play. The A.W.A.A. uses just one. The boards are 12 inches wide by 48 inches long and 4 inches tall. Each board has three, 3½ inch holes spaced at 12, 24 and 36 inches.
Full Answer
What size washer board do I need for my washing machine?
The standard size for a three-hole washer board is 40’’x16’’. The board has three holes of 4’’ in diameter. Each hole’s center is 12’’ from the center of the next hole. We’ve found that the best washer boards are the ones with crown bags in each hole. These bags catch the washers when they fall in.
How big are the holes in a washer board?
The board has three holes of 4’’ in diameter. Each hole’s center is 12’’ from the center of the next hole. We’ve found that the best washer boards are the ones with crown bags in each hole.
What are the different types of washer boards?
There are a lot of variations to the washer game. Whether your rules require 3 hole boards, one hole boxes, nesting 3 hole boards, octagon boxes, or washer pits, make sure you design your board accordingly. Gather your materials.
What is the best surface for a washers board?
Light Wood - The light colored wood features a classic washers game look. The hard surface of the washers board is perfect for advanced players looking for a challenging game. We don't recommend the wood surface for beginners as the washers will bounce on the wood and off the board unless you're an advance player.
What are the dimensions of a washer board?
Regulation board size is 12 inches wide by 48 inches long. However, there are variations available out there that range in size from 12″ wide by 32″ long to 16″ wide by 48″ long. Our preference is for 16″x48″, which is what these directions are based on.
How far are washer boards apart?
about 20 feet apartWasher boards and boxes are typically positioned on flat surfaces about 20 feet apart. If you would like to give yourself and your friends more of a challenge, you can space them out even farther. Washer toss can be played in teams of one or two players.
How do you make a washer toss board?
0:269:21How To Build A Washer Toss Game - YouTubeYouTubeStart of suggested clipEnd of suggested clipSaw I wanted the size to have square edges. So I used a 2 by 6 board and ripped it down to three andMoreSaw I wanted the size to have square edges. So I used a 2 by 6 board and ripped it down to three and a half inches on my table saw to simplify things you could also just use a 2 by. 4.
What are the dimensions of a washer toss box?
Washer pits and boxes vary in size and shape, but a standard for one-hole washers is 16 by 16 by 4 inches (410 mm × 410 mm × 100 mm), with a cylindrically-shaped cup ( 41⁄2 in [110 mm] in diameter and 5 in [130 mm] in height) located in its upper surface.
What are the rules for washers?
1:092:58How To Play Washer Toss - YouTubeYouTubeStart of suggested clipEnd of suggested clipOnce each player has thrown all their washers the round is. Over. Three points are scored for aMoreOnce each player has thrown all their washers the round is. Over. Three points are scored for a washer in the center pipe one point is scored for a washer in the box. No points are scored for washers.
What is the height of a washing machine box?
Once you've selected the right washing machine outlet box for your situation, it should be installed at a height where the flood level rim (or the top of the drainage outlet) is 32” to 34” above the finished floor.
How do I make a hillbilly horseshoe?
0:058:34How To Build - Washer Board (Redneck Horseshoes) - YouTubeYouTubeStart of suggested clipEnd of suggested clipFirst thing I'm going to do to create the washer board is to get a sheet of OSB plywood you couldMoreFirst thing I'm going to do to create the washer board is to get a sheet of OSB plywood you could probably get by with a half of a sheet. But. It's pretty inexpensive. So I just bought a whole sheet.
How many washers are in a baseball board?
Each board also comes with 6 washers and a washers holder drilled into the inside of the board. Three of the six washers have a small hole drilled into it to distinguish between teams.
What is the best surface for a washer board?
1. Carpeted Surface - A carpeted surface is the best choice for most players. The carpet on the washer board slows the bounce and slide of the washers for a fun and beginner friendly experience.
How long is the rope on a washers game board?
There's also a rope that's 10 feet long connected to each washers game board set so you get the exact correct distance between boards every time.
How many finishes are there on washer game boards?
These washer game boards come in three finishes.
What wood is best for washers?
3. Dark Wood - The dark stained wood is a great look for your washers game. The wood board will provide a challenging experience that is great for advanced players.
Can you stand on a washer game board?
The washers game boards can be stood on while you throw or some people prefer to stand to the side.
Is washer board 100% guaranteed?
We stand behind our was her boards 100% and your satisfaction is guaranteed. Order today to get the best washers game available! You'll enjoy years of playing the washers yard game with your friends and family!
How many washers do you throw in a round?
Each player throws their washers from the same side over to the opposite board (facing longways). The player who throws first will throw all four washers, then the second player throws their washers. The player that scores the most in each round gets to throw first on the following round.
How many washers does each team throw in a game?
Each individual or team throws 4 washers (one at a time), and whoever scores the 21 points first wins the game.
Who gets the point if a washer is knocked into a hole?
If a washer is knocked into the hole (by a member of either team), the point goes to the player who originally threw the washer.
Can you cut half sheets at a hardware store?
Most hardware stores will also sell half-sheets, or can custom cut for a small fee. I use either a table saw or skill saw for this cut. However if you’re not comfortable with power saws or limited on transportation space, take advantage of the the cut services from your local hardware store.
How far apart are the washers on a board?
The two boards are spaced 10 feet apart from each other. The washers are standard 1 inch washers (they are 2½ wide with a 1 inch hole in the center). How we play. Two players or teams of two. Two players start by throwing three washers each from the same side of the board.
How many holes are there in a washer?
Washers has many different boards of play. The A.W.A.A. uses just one. The boards are 12 inches wide by 48 inches long and 4 inches tall. Each board has three, 3½ inch holes spaced at 12, 24 and 36 inches. The two boards are spaced 10 feet apart from each other. The washers are standard 1 inch washers (they are 2½ wide with a 1 inch hole in the center).
What happens when you trow your washers?
This means that after both players trow their washers the lower score is subtracted from the higher one. If both players score the same amount of points no points are awarded. For example if player one score 4 points then player two scores 5, player two gets 1 point. Player two "washed" 4 of player one's points.
How many washers do you throw in a round?
Each player will throw their washers from the same side, to the opposite board. The first player will throw their 3 washers; the second player will then throw their 3 washers to complete one round. After all washers have been tossed, and scores are noted, players will move to the opposite board to continue play.
Where to play washers?
Original Washers may be played on a level lawn, on the beach, camping, or anyplace else you wish to play. Initial Play: Each individual, or one member of each team, throws a washer. Whoever gets the highest points, or gets closest to a hole, chooses if they want go first or second. Players may either stand on, or next to the board.
How far apart should washer toss boxes be?
The washer toss boxes should be 21 feet apart with the distance adjusted for skill.
How many washers are there in a washer game?
Typically, the game is played with six washers. Each team gets three. It is a good idea to paint the washers different colors to better keep track of points.
How wide should a washer glove be?
The backboard you should get for a basic game of washer gloves is about eight inches high and 10 inches wide.
Can you throw washers across the box?
Members of the first team can throw their washers across at the box on the other side. Alternatively, members of Team 1 and Team 2 can alternate throwing their washers so both teams know, in real time, what they’re up against.
How many washers per turn?
Each competitor pitches three - three inch washers per turn. (i.e., one competitor pitches three washers and then the other competitor pitches three) Turn determined by last competitor to score. (i.e., even if the last person to toss scores zero, but cancels points scored by competitor in that round.)
How many 3" pieces of ABS pipe?
cut your ABS pipe into six 3" (measure the depth of yours to double check) parts
How many points do you get in a washer game?
Scoring takes place after all eight washers have been tossed. Only one team scores per round. One point is awarded for each washer inside the box, and three points for each washer inside the cup. If Player A lands two in the box (2 points) and Player B tosses one in the cup and one in the box (4 points), Player B’s team scores two points (the difference between each player’s total). The team that scored last tosses first in subsequent rounds. The first team to reach 21 points wins. If luck is on your side, and you manage to land a washer on top of one of the box edges, you automatically win the game!
How to make a splash of color on washers?
If you’d prefer a splash of color, use spray paint. Bring your washers out, too, and paint them, four of one color and four of another color. Another option is to mark them with different designs in permanent marker. Have the kids come up with something creative.
How to secure wood to a box?
Predrill two holes through the longer boards and into the shorter boards with a drill bit that’s slightly narrower than your 3-inch screws. Use your drill/driver to secure the wood together with those screws and repeat for each corner, position it in the box, and hold it steady until it is set.
How long does it take to paint a woodshop?
Estimated time to complete: 2 hours, plus time for paint to dry. Woodshop safety: Always wear proper eye, hearing and breathing protection when working with power tools or hand tools, and always work on a stable surface.
How many 2x4 pieces can be cut?
Take the materials list with you to the store. The eight 2x4 pieces can be cut from two 6-foot boards. If you don’t have a saw back at the cabin, ask the staff at the store if they are able to cut them to size for you. The same goes for the plywood squares.
How to attach carpet square to plywood?
Place the carpet square in the box using all-purpose adhesive to secure it to the plywood if you aren’t using adhesive-backed carpet. Apply a bead of the adhesive to the bottom of the PVC coupler. Glue the cut out carpet circle inside. Attach utility handles to your boxes and carry them out to the yard!