Full Answer
What size are the washers in the washer game?
What size are the washers in the washer game? The washers are 1-inch I.D., 2 1/2 inch O.D. x 1/8 inch thick. The PVC cups are either 3-inch, 3?1⁄2-inch or 4-inch (3 is the preferred size) I.D., 21 feet apart.
What is a washers game board made of?
Every board features a rope handle making your washers game easy to carry to the beach or tailgate. Boards are built with sturdy 2x4's and plywood for a very strong washers game board that will last for years. The washers game boards can be stood on while you throw or some people prefer to stand to the side.
Can you stand on the washers game board?
The washers game boards can be stood on while you throw or some people prefer to stand to the side. Each board also comes with 6 washers and a washers holder drilled into the inside of the board.
How far apart should the pits be on a washer board game?
Most players recommend that you measure a distance of 25 ’ from the center of one cup to the center of the other. Of course, the greater the distance, the more difficult the game. However, you need to be careful not to put the pits too far apart as it may be overwhelming for the youngest players. How to play washer board game?
What are the dimensions for washers game?
16 by 16 by 4 inchesWasher pits and boxes vary in size and shape, but a standard for one-hole washers is 16 by 16 by 4 inches (410 mm × 410 mm × 100 mm), with a cylindrically-shaped cup ( 41⁄2 in [110 mm] in diameter and 5 in [130 mm] in height) located in its upper surface.
What size are washers for washer boards?
Two sets of three standard 3" washers are required and each set must be of a different color or somehow marked differently. Contestants may use their own washers as long as each washer is at least 2 15/16" in diameter and weighs 4 1/2 ounces or less.
How do you make a washer game board?
0:469:21How To Build A Washer Toss Game - YouTubeYouTubeStart of suggested clipEnd of suggested clipSaw I wanted the size to have square edges. So I used a 2 by 6 board and ripped it down to three andMoreSaw I wanted the size to have square edges. So I used a 2 by 6 board and ripped it down to three and a half inches on my table saw to simplify things you could also just use a 2 by. 4. Once my boards
How far apart are the boxes for the washer game?
20 feetGame Setup: Find a flat open space and place the two washer targets 20 feet from each other (about 7 paces). This distance can be changed based on player ability and desired speed of play.
Is washer toss played with 3 or 4 washers?
Each player will throw their washers from the same side, to the opposite board. The first player will throw their 3 washers; the second player will then throw their 3 washers to complete one round. After all washers have been tossed, and scores are noted, players will move to the opposite board to continue play.
How do you score a 3 hole washer?
* Team A scores one in the 3 point hole and one in the 1 point hole for 4 total points. Team B scores one in the 5 point hole, for 5 total points. Team B would score 1 point for the round. * Team A scores a 3 and a 5, for a total of 8.
How do you make a single hole washer board?
0:394:30How to Build a Washer Toss Game - YouTubeYouTubeStart of suggested clipEnd of suggested clipCut two pieces of 3/4 inch plywood. You can also use half inch plywood that would work if that's allMoreCut two pieces of 3/4 inch plywood. You can also use half inch plywood that would work if that's all you have my plywood is 16 inches square find and mark the center of the plywood squares.
How do you pitch a washer?
0:193:42Washer Pitching - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne in the holes five points a winner over the holes three points and for its closest washer with inMoreOne in the holes five points a winner over the holes three points and for its closest washer with in the foot is one point and if you have your washer in the cup.
How do you make a ring toss carnival game?
How to Play the Cola Ring Toss Carnival Game: Carnival players are given five rings to try their hand "ringing" one of the individual glass sodas. If they ring a soda, they get to keep a two liter bottle soda as their carnival prize.
How do you play washer with 5 holes?
The object of the game is to try to toss a washer into one of the 5 target holes. Play continues until one player or team reaches 21 points exactly after all 6 washers have been tossed in any one round. If a team/player goes over 21 points in any one round, no points are scored. 21 points exactly wins the round.
Where did the game washers originate?
Washers is a game invented at the Falcon Bronze playground in Youngstown, Ohio in 1931. Iron washers are pitched into holes or cups spread 20 feet apart, following rules similar to horseshoes.
How many washers does a player throw in a game?
First player throws four washers, then the first player from the opposite team throws their four washers. Opposing team members now pick up the washers and throw them back in the same fashion. The team that scores the most in each round gets to throw first on the following round.
How many washers do you throw in a round?
Each player throws their washers from the same side over to the opposite board (facing longways). The player who throws first will throw all four washers, then the second player throws their washers. The player that scores the most in each round gets to throw first on the following round.
Can you cut half sheets at a hardware store?
Most hardware stores will also sell half-sheets, or can custom cut for a small fee. I use either a table saw or skill saw for this cut. However if you’re not comfortable with power saws or limited on transportation space, take advantage of the the cut services from your local hardware store.
What size washers are used in Texas washers?
What Are the Dimensions for the Texas Washers Game? The washers used to play the official version of Texas Washers are 1-inch grade 8 USS washers. Holes are made from 4-inch diameter PVC pipe cut in 6-inch segments which are placed exactly 21-feet apart.
How far apart are Texas washers?
Holes are made from 4-inch diameter PVC pipe cut in 6-inch segments which are placed exactly 21-feet apart. Texas washers are also available in other dimensions than the official version, and the game goes by several other names.
Where to play original washers?
Original Washers may be played on a level lawn, on the beach, camping, or anyplace else you wish to play. Each individual, or one member of each team, throws a washer. Whoever gets the highest points, or gets closest to a hole, chooses if they want go first or second. Players may either stand on, or next to the board.
How many washers do you throw in a round?
Each player will throw their washers from the same side, to the opposite board. The first player will throw their 3 washers; the second player will then throw their 3 washers to complete one round. After all washers have been tossed, and scores are noted, players will move to the opposite board to continue play.
What happens if you throw a washer in a hole?
If a washer is knocked into a hole either by an opponent or by a team member, the points go to the player who originally threw the washer. If during a round, opponents each toss a washer into the same hole, neither player scores; a player may in this way cancel another player’s successful score. Winning the Game:
How to play a board game outdoors?
Because the game is usually played outdoors, make sure you create a durable box able to withstand the elements as well as the pounding from the game itself. If you will be playing at a specific location, make sure to measure the dimensions to create a suitable board.
How to make a sandbox?
1. Gather your materials. Head to your local hardware store for two 6-ft two-by-fours, two 17-by-17-inch squares of plywood, two 14-by-14-inch squares of carpet (or fake grass) and two 3.5-inch pieces of PVC pipe, each with a 4-inch diameter.
How to make a square frame?
Screw the square frame together. Make sure the wood screws you use are long enough to pierce both pieces of two-by-four at each corner. Use a power drill to ensure that the ends are firmly locked together. Measure and cut a piece of square plywood. Create the square piece of plywood to fit beneath the square frame.
How many points are in a row in a box?
There are two teams of two, and team members stand on opposite sides of each other. Each player will throw all three in a row. In the box is one point, in the center is three. The other team throws from the same side and anything that lands in the same area as the opposing team is cancelled. Play to 21.
How to make a square out of two by four?
2. Cut four pieces of two-by-four to create a square. Cut each two-by-four to 17 inches in length. Create a 17-by-17-inch square by cutting the ends of each of these four two-by-fours at 45-degree angles with a miter saw or box saw.
How many washers per turn?
Each competitor pitches three - three inch washers per turn. (i.e., one competitor pitches three washers and then the other competitor pitches three) Turn determined by last competitor to score. (i.e., even if the last person to toss scores zero, but cancels points scored by competitor in that round.)
How many points does a competitor score in a game?
First competitor to score exactly 21 points wins the game. If both competitors tie at 21 in same round, then the game restarts at 11 each. If a competitor scores over 21 then subtract score from last point total. (i.e., current score 18, scores 3 for 21 but scores a second washer counting 5 which equals 26.
How long does it take to paint a woodshop?
Estimated time to complete: 2 hours, plus time for paint to dry. Woodshop safety: Always wear proper eye, hearing and breathing protection when working with power tools or hand tools, and always work on a stable surface.
How to make a square with 2x4s?
Step 1. Cut the 2x4s and plywood to size and sand them smooth. For each box, position four 2x4s (two 16-inch lengths and two 13-inch lengths) on a level surface with the narrow edge down and equal-sized boards at opposite sides to create a square. To hold this together, a couple of clamps should work.
How many 2x4 pieces can be cut?
Take the materials list with you to the store. The eight 2x4 pieces can be cut from two 6-foot boards. If you don’t have a saw back at the cabin, ask the staff at the store if they are able to cut them to size for you. The same goes for the plywood squares.