Where can I buy fuel line parts for my Boat?
When any boat fuel line component needs to be replaced, shop at Wholesale Marine. We stock everything from marine fuel hoses, siphons, valves, withdraw assemblies, clamps, tank vents, and marine fuel connectors. Contact us or use our Parts Finder online to locate the correct parts.
Are your boat fuel lines and hoses safe?
Boat fuel lines and hoses in any boat’s fuel systems are essential in ensuring safe boat operation and trouble-free performance. High-quality fuel assembly components must be securely attached to prevent potentially dangerous boat fuel lines leaks.
How do I know if my boat fuel line is bad?
Check for suction at the tank end by covering the hose end with your finger. If there is no suction, the check valve is faulty and will require replacement. When any boat fuel line component needs to be replaced, shop at Wholesale Marine.
What to do if your boat fuel line has no suction?
If there is no suction, the check valve is faulty and will require replacement. When any boat fuel line component needs to be replaced, shop at Wholesale Marine. We stock everything from marine fuel hoses, siphons, valves, withdraw assemblies, clamps, tank vents, and marine fuel connectors.
What size is outboard fuel line?
Still allowing the proper amount of fuel to get to the engine without having any problems. Of course, the 3/8″ fuel line will work for any of the outboards. But most smaller outboards have fittings or quick connects on them that are set for a 5/16″ hose. It's basically the standard hose for the smaller engines.
What size is Mercury outboard fuel line?
Mercury/Mariner O/B Standard Fuel Line Assembly, 6' x 3/8"Compatibility93806BLP7Inside Diameter3/8 InchOutside Diameter11/16 InchMaximum Continuous Length6 FootTypeFuel Tank Lines
What's the difference between marine fuel line and regular fuel line?
As I understand, one big difference is better UV resistance in the marine fuel line. Automotive fuel line gets a virtually no exposure to direct daylight, so little to no need for UV protection. Another possible difference is better flame resistance in the marine fuel line.
What is the best metal for fuel line?
Most cars come from the factory with Metal Lines because they hold up better than any soft material. They are usually made from stainless, aluminum or coated steel tube. Metal is the best material for fuel lines. However, it can be difficult to fabricate.
What size fuel line do I need?
Recommended Size, Based on HorsepowerRecommended Fuel Line Size (from the tank to the pump)Engine OutputSize (inches)Size (AN)350 hp or less5/16 in.-5350-450 hp3/8 in.-6450-650 hp1/2 in.-81 more row•Sep 16, 2017
Are Yamaha and Mercury fuel lines the same?
Yamaha Outboard Fuel Line Assembly Will also fit Mercury & Mariner outboards which require the tank end to push on to 8-10mm barbed fuel fitting. Please note engine end connector will only fit Mercury Mariner engine 1987 & Newer. 5/16" ID Hose is compatible with most outboard engine fuel systems.
Can I use rubber hose to repair fuel lines?
Standard rubber vacuum or heater hose should never be used in fuel applications. The hose will deteriorate from the inside out and can plug fuel filters and carburetors with rubber debris, long before it springs an external leak.
Is vinyl tubing good for fuel line?
No - unless specially made for this purpose do not use plain ordinary vinyl tubing for gasoline and other hydrocarbons.
What is the best material for fuel lines?
The best fuel line material depends on your needs. However, the best material for fuel lines is polytetrafluoroethylene or PTFE. PTFE fuel line is made of plastic material specifically known as Teflon. This fuel line material is impervious is resistant to the degenerative fuel effects which could form vapor barriers.
Is braided fuel line better?
Braided hose provides better heat dissipation and better flow, which is important when choosing performance car parts. Additionally, braided lines are able to withstand more pressure than rubber lines. When you need a flexible hose, you may not be able to use metal.
What type of tubing is used for fuel lines?
Aluminum tubing can be used for everything from fuel, transmission, and oil supply lines, even vacuum and coolant lines.
Are braided fuel lines safe?
Modern fuels have additives that harden and deteriorate traditional rubber hose including stainless steel-braided hose. This leads to potentially dangerous leaks and weeping.
What are boat fuel lines?
Boat fuel lines and hoses in any boat’s fuel systems are essential in ensuring safe boat operation and trouble-free performance. High-quality fuel assembly components must be securely attached to prevent potentially dangerous boat fuel lines leaks. Find the top names in boat fuel lines and hoses including Attwood , Tempo Marine , Moeller Marine , Sierra Marine Products , MPI , Bennett Marine, and Whitecap Industries. It is vital to understand marine fuel hose-related issues to assure these components are fully functional and safe or if these components are in need of replacement.
How to check if a fuel tank connector is suction?
Check for suction at the tank end by covering the hose end with your finger.
What is the Moeller 033802-10?
Moeller Marine 033802-10 Aluminum Anti-Siphon Barb Anti-siphon valves, are required by Federal Law and the USCG on all permanent fuel tank installations. Use 15 (Brass) calibrated for HP 200 & above and 30 (Aluminum) calibrated for HP below 200...