In the process of replacing a toilet. Removed toilet to find the flange is set about 1 inch below the floor surface. Other problems are that the flange is not level and is also bent slightly.
What is the proper height for a toilet flange?
- Remove your broken flange if you’re replacing it and insert the new one into the waste pipe. ...
- Next, you’ll want to choose the right spacer from the extender system. ...
- Once you find the right spacer for your needs, pay attention to the layout marks and lay it on top of the gasket. ...
What is the best type of toilet flange?
Reviews of the Best Toilet Flange
- NEXT BY DANCO Perfect Seal Toilet Wax Ring. ...
- OATEY 43405 Set-Rite Toilet Flange Extender. ...
- Flexon Toilet Flange for 4″ PVC, ABS. ...
- Korky 6000BP Universal Toilet WaxFree Seal. ...
- Leaknogasket Wax Free Toilet Seal. ...
- Oatey 43538 ABS Cast Iron Flange Replacement. ...
- NEXT BY DANCO (10672X) HydroSeat Durable Toilet Flange. ...
- Oatey GIDDS-173390 43539 Replacement Flange. ...
How to properly install a toilet flange?
- Follow the order of steps
- Make measurements carefully
- Be thorough
What to do if the toilet flange is too high?
Use Grout
- Start by mixing the grout. Follow the instructions on the package or put a small amount in a container and add water in a 6 grout to 1 ...
- Remove your toilet and put it on four rubber shims. The shims must prevent your toilet from moving while you’re grouting around the flange.
- Now take the mixed grout and fill the gap with it. ...
How do you install a toilet when the flange is below the floor?
2:525:00Toilet Flange Too Low - Great Solution! - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis in place. And then another gasket. And then the final spacer. And you can add as many as youMoreThis in place. And then another gasket. And then the final spacer. And you can add as many as you want. And then two or four concrete bolts they are a bugger to drill to the concrete.
Can a toilet flange be level with the floor?
The toilet flange needs to be on top of the finished floor. Meaning the bottom edge of the flange needs to be on the same plane as the toilet. So if your toilet sits on the tile, the flange needs to be on top of the tile too.
What happens if toilet flange is too low?
Low toilet flange is a common problem when installing a new (or in my case thicker mortar base). Unless your toilet is properly mated and sealed to the waste pipe, you may face problems related to sewer gas odor (it's very unhealthy and unpleasant) and/or fluid leaks.
Should toilet flange be level with floor or above?
0:204:10The Correct Height of a Toilet Flange - YouTubeYouTubeStart of suggested clipEnd of suggested clipThing you want to do is remember that all toilet flanges should always be installed on top of theMoreThing you want to do is remember that all toilet flanges should always be installed on top of the finished floor.
How high should toilet flange sit above floor?
Check the Flange Height With the toilet removed, you can see the toilet flange and measure its height above the floor. The optimum flange height to aim for is 1/4 inch above the finished floor. This typically allows for almost any type of wax ring to be used and still ensure a good seal.
Can a toilet flange be to high?
When your toilet flange is too high, your toilet may leak water and rock back and forth when used. Both the leaking and the rocking can warp or break the floor. A leaking flange can also rot the subfloor and lead to the accumulation of mildew and mold.
Is it OK that toilet flange is lower than floor?
In a typical toilet installation, the floor flange that sits inside the drain opening below the toilet should be positioned so that its bottom surface rests flush against the finished floor or no more than 1/4 inch above or below the floor.
How do you raise the height of a toilet flange?
A better solution is to raise the height of the flange.Measure the distance from the top of the toilet flange to the top of the finished tile floor.Purchase a toilet flange extension ring thick enough to raise the toilet mounting surface so that it's approximately 1/4-inch above the level of the finished tile floor.More items...
How do you raise a low toilet flange?
1:367:42Toilet Flange Repair Using a Toilet Flange Extender (Step-by-Step)YouTubeStart of suggested clipEnd of suggested clipYou need to raise it up so that it's at least 1/8 to 1/4 inch above the finish Flor and one way toMoreYou need to raise it up so that it's at least 1/8 to 1/4 inch above the finish Flor and one way to do that is to use a closet flange spacer like this one here this is a 1/2 inch spacer. Made by OD.
Can toilet flange be flush with tile?
Toilet bowls are designed to be secured to the toilet flange with a wax ring. The wax ring seals and connects the flange to the lower level piping. Placing the flange below the tiles or flush with the floor can cause drainage complications.
How do I fill the gap between my toilet and floor?
Apply a thin, even bead of caulk around the base of the toilet to cover the gap along the floor and hide the shims. If necessary, smooth the caulk with your finger, wiping your finger clean frequently with a paper towel or a rag.
How do I install a flange extender?
0:525:16Set-Rite Toilet Flange Extender Installation - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you're using if you have a plastic or metal flange like I do it calls for just using the gasketMoreIf you're using if you have a plastic or metal flange like I do it calls for just using the gasket if you've got an old cast-iron flange. Then ask that you put a wax ring on it instead of the gasket.
Should a toilet flange sit on top of the tile?
No, it should sit about ¼” over the top of the floor.
How do you adjust a toilet flange if the flooring has already been laid?
You can remove a toilet flange and reposition it to sync up with the height of the floor.
Is a toilet flange glued to a pipe?
Sometimes it is, and sometimes it is not. PVC flags are often glued where metal ones are usually secured using bolts.
What is the maximum height of the toilet flange over the floor?
A toilet flange should never be more than ¼” above the floor tiling.
What do you do if the toilet flange is too low?
If your toilet flange is too low, then you need to remove the toilet and reposition it. If the pipe is the problem, then you might have to contact...
Wax as a waste pipe?
Some folks recommend using a thicker wax ring, or even doubling up wax rings. The problem with this, is that you end up with a waste pipe made from wax. Now this might hold up, but more than likely it's eventually going to fail, and leak.
Modify the plumbing
If you have access to the flange from below, you might be able to modify the plumbing to make the flange sit atop the floor. In most cases, however, this is not an option.
Adapters
There are adapters available, that solve this exact problem. The Set-Rite Toilet Flange Extender Kit; described in the answers to this question, Comes with different size spacers, which allows it to compensate for various sized offsets.
What is the flange on a toilet?
The toilet flange sits directly below the toilet itself and connects the toilet drain to the main drain line. Toilet flanges are usually made out of PVC, rubber, brass, stainless steel, or some other kind of metal, and they have a rubber gasket or wax seal to seal the bottom of the toilet and the flange. Toilet flanges are necessary ...
What is the toughest toilet flange?
Stainless steel is probably the toughest type of toilet flange and is the most resistant to corrosion and rust. However, steel toilet flanges also tend to be the most expensive and are the most difficult to install properly and securely. Aluminum. Aluminum is a popular material for toilet flanges that is lightweight and resistant to corrosion.
What is the most common type of plastic flange?
Plastic. PVC plastic is probably the most common type of plastic flange and is very cheap. However, plastic is not as durable as metal, and typically, people forgo plastic flanges and opt for metal ones. Plastic is, however, extremely resistant to corrosion and damage from chemicals.
What is the best material for toilet flanges?
Copper. Copper is another popular material for toilet flanges. Copper is highly resistant, durable, and does not corrode or rust as easily as steel or aluminum. Copper is slightly malleable, though, and copper flanges can warp if installed improperly with pressure on them. Brass.
What happens if you don't have a toilet flange?
Without a proper toilet flange, you can encounter leaks and other issues that can ruin your bathroom. Today, we will give a quick guide on toilet flanges, how they work, and how to find the best one for your home bathroom.
Why is my toilet flange set too low?
If it is set too low, then that can cause stress in the pipes, which can cause cracks and breaks. So it is imperative that you set your toilet flange at the proper height, or else you can cause a lot of damages that could take thousands of dollars to fix.
Why is it important to add a quarter inch of height to a pipe?
The extra quarter-inch of height is necessary to give space for the wax or rubber ring that seals the pipe. If the flange is set too high, then it can cause leaks because the seal will not connect entirely. If it is set too low, then that can cause stress in the pipes, which can cause cracks and breaks.
Remove the Toilet
To access the toilet flange, remove the toilet from the drain and set it aside. This is done by removing the nuts holding the toilet onto the tank's bolts, then carefully prying the toilet away from the flange. You may want to first remove the tank from the toilet bowl to make this easier.
Clean the Flange
Clean the top of the old flange to ensure that the flange extension can sit neatly in place. If there is old wax on the flange, scrape it off with a putty knife, then remove the residue with mineral spirits and a rag.
Test Fit the Flange Extender
Check the fit of the flange extender, using one or more spacers, if included with the extender. The bottom of the flange extender should be flush with the finished floor or no more than 1/4 inch below or above the floor surface.
Install the Flange Extender
Remove any screws securing the old flange to the subfloor. You will likely use some or all of these screw holes for securing the flange extender.
Reinstall the Toilet
With the flange extender in place, you can now replace the toilet. It is generally best to use a new wax ring when reinstalling the toilet. When using an extender, set the toilet using a deep-seal wax ring fitted to the horn of the toilet.