As a rule, the toilet flange should be at the top of the tile. To be precise, the toilet flange must be leveled with the finished floor. You cannot install a toilet flange flush with the tiles. Experts recommend installing the toilet flange over the finished floor or tiles.
Full Answer
How do you cut tile around a toilet flange?
Cut the tiles using a wet saw, slowly turning the tile as you cut it to maintain the curved line. Perfection is not essential because the cut end of the tile will be hidden under the toilet. 7
What to do if the toilet flange is too high?
Use Grout
- Start by mixing the grout. Follow the instructions on the package or put a small amount in a container and add water in a 6 grout to 1 ...
- Remove your toilet and put it on four rubber shims. The shims must prevent your toilet from moving while you’re grouting around the flange.
- Now take the mixed grout and fill the gap with it. ...
How to set a toilet flange?
- Follow the order of steps
- Make measurements carefully
- Be thorough
What is the proper height for a toilet flange?
- Remove your broken flange if you’re replacing it and insert the new one into the waste pipe. ...
- Next, you’ll want to choose the right spacer from the extender system. ...
- Once you find the right spacer for your needs, pay attention to the layout marks and lay it on top of the gasket. ...
Should toilet flange be flush with tile?
The toilet flange needs to be on top of the finished floor. Meaning the bottom edge of the flange needs to be on the same plane as the toilet. So if your toilet sits on the tile, the flange needs to be on top of the tile too.
Can toilet flange be flush with floor?
For those that don't already know, the proper toilet flange height is when it's flush with the top of the finished floor. The optimum height is about ¼ inch. It's easier to get your flange flush with the floor if you lay your flooring before you install the flange.
Should flange be flush with floor?
0:204:10The Correct Height of a Toilet Flange - YouTubeYouTubeStart of suggested clipEnd of suggested clipThing you want to do is remember that all toilet flanges should always be installed on top of theMoreThing you want to do is remember that all toilet flanges should always be installed on top of the finished floor.
How close should tile be to toilet flange?
1/2″In most cases, as long as you've cut within 1/2″ around the flange, your toilet once installed will cover your cuts. However, if you feel you've made too big of a cut and your toilet won't cover, start over until you get it right.
What happens if the toilet flange is lower than the floor?
3:505:00Toilet Flange Too Low - Great Solution! - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut the wax ring will take care of that no problem concrete bolts gaskets in between double gasketsMoreBut the wax ring will take care of that no problem concrete bolts gaskets in between double gaskets down the flange.
How do I fill the gap between my toilet and floor?
Apply a thin, even bead of caulk around the base of the toilet to cover the gap along the floor and hide the shims. If necessary, smooth the caulk with your finger, wiping your finger clean frequently with a paper towel or a rag.
How do you raise the toilet flange after tiling the floor?
A better solution is to raise the height of the flange.Measure the distance from the top of the toilet flange to the top of the finished tile floor.Purchase a toilet flange extension ring thick enough to raise the toilet mounting surface so that it's approximately 1/4-inch above the level of the finished tile floor.More items...
How high can a toilet flange be above finished floor?
1/4 inchThe optimum flange height to aim for is 1/4 inch above the finished floor. This typically allows for almost any type of wax ring to be used and still ensure a good seal.
Can toilet flange below floor level?
In a typical toilet installation, the floor flange that sits inside the drain opening below the toilet should be positioned so that its bottom surface rests flush against the finished floor or no more than 1/4 inch above or below the floor.
Do you tile around the toilet or under it?
The bathroom fitters are unanimous—if you're looking for a high quality finish, with a better seal against water damage, then always tile the floor first.
Can a toilet flange be too high?
When your toilet flange is too high, your toilet may leak water and rock back and forth when used. Both the leaking and the rocking can warp or break the floor. A leaking flange can also rot the subfloor and lead to the accumulation of mildew and mold.
Do you remove toilet when tiling?
They often ask if they should remove the toilet before installing a new bathroom floor. While it is possible to install a new linoleum or ceramic tile floor without removing the toilet, it is not recommended and actually can increase the labor involved in the project.
Should the toilet flange be flush with the floor?
The toilet flange cannot be mounted flushed with the floor. Rather it needs to be set up directly on the top part of the floor and ensure that the lower part is placed evenly with the floor. Because the toilet bowl needs to be directly connected with the top part of the toilet flange.
Should the toilet flange be level with or sit above the floor?
First of all, the toilet flange needs to sit above the floor rather than being flush with the floor. The second thing is that the lower part of the toilet flange needs to be mounted even with the floor.
What should be the maximum height of the toilet flange above the floor?
Well, the maximum height of the toilet flange above the floor depends on the height of the toilet bowl. If your toilet bowl sits on top of the tile then the toilet flange needs to be placed at a decent height from the floor.
Can the toilet flange be lower than the floor?
No, by any means the toilet flange cannot be lower than the floor. In fact, the bottom part of the toilet flange needs to be evenly placed on the same plane as the floor. If you place your toilet flange lower than the floor then there will be huge drainage complications.
Should the toilet flange be screwed to the floor and glued to the pipe?
Yes, the toilet flange needs to be screwed to the floor and glued to the pipe or else the sealings may get damaged due to the constant motion from the flange.
Final thoughts
Well, the importance of mounting up the toilet flange above the floor is immense. It doesn’t only prevent unnecessary water leakages but also ensures that there is no water flowage. Mounting your toilet flange on top of the floor can save you from unnecessary bathroom drainage complications.
Should Toilet Flange Sit On Top Of Tile
The installation process of a toilet can be challenging, especially when you don’t know much about its process. Plus, you need to know the installation placement, including the toilet flange. Hence, many people will go through the dilemma of mounting the toilet flange properly.
How High Should Toilet Flange Be Above Floor
The toilet flange should be at the right height to allow the toilet to work properly. Hence, you should find the right height for the toilet flange.
Final Words
Installing a new toilet isn’t a walk in the park. You need to consider the proper drainage, sealing, and secure toilet positioning. In this regard, many people are concerned about the positioning of the toilet flange. Should toilet flange sit on of tile or below it?