| Model | VESA Pattern | Screw Size | Weight(Without Stand) |
| 28S305 | 100mm x 100mm | M4 x 12 | 7.3 lbs |
| 32D100 | 100mm x 100mm | M4 x 12 | 9.7 lbs |
| 32S301 | 100mm x 100mm | M4 x 12 | 13.2 lbs |
| 32S305 | 100mm x 100mm | M4 x 12 | 9.7 lbs |
Full Answer
What size screws do I need to mount a Tcl TV?
It's VESA 300 x 300 and I used the exact same screws that came with the TV which are M6 x16mm according to the TV Manual I found from the TCL website. I also purchased the "Mounting Dream Tilt TV Wall Mount Bracket" and it came with various screws that worked.
What size screws do I need to mount my TV to wall?
However, most wall mounts come with all the necessary hardware to attach the mount to the wall and to the TV. Note that the size of the screws that attach to the wall will also be in millimeters, so it will be M4, M5, M6, etc.
What is the correct Vesa pattern for my TCL TV?
On all TCL TVs, looking at the specs will show you the correct VESA pattern, represented in millimeters for width and height. For example, our 50S535 has a 200mm x 200mm VESA pattern.
How do I install the TV on the TV stand?
1. 1) Get the TV ready - Place the TV face down on a soft, cushioned surface on a table. Position the TV so that the stand, when attached, will hang over the edge of the table. It is recommended to use strong screwdriver or a power screw-drive if available.
What size screws for TCL TV wall mount?
TV Specifications and screw sizes for mountingModelVESA PatternScrew Size55R617200mm x 200mmM6 x 1655R625200mm x 200mmM6 x 2555S401200mm x 200mmM6 x 1655S403200mm x 200mmM6 x 1660 more rows
How do you put a TV on a TCL stand?
One at a time, line up the holes on the legs with the numbs on the TV, then install the legs using the pre-threaded holes and screws provided: Each leg is labeled with an L (Left side) and R (Right side). Each leg has an arrow; the arrow should be pointing toward the front of the TV if installed properly.
What size are TV mount screws?
What type of screws and hardware should I use to hang the mount on the wall?Screen Size (inches)VESA Specification (A*B)Standard Screw19-2275 x 75M4100 x 10023-29200 x 100M430-40200 x 200M64 more rows•May 2, 2022
Where are the mounting holes on my TCL TV?
If you want to avoid looking it up, just grab a tape measure, and measure the four "square" (or occasionally rectangular) mounting holes centered horizontally on the back of your TV.
How do you attach a TV to a stand?
4:547:09How to Setup any Flatscreen TV on Stand review - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo now what you want to do is grab you - TV brackets and these screws are going to be on the bottomMoreSo now what you want to do is grab you - TV brackets and these screws are going to be on the bottom and these are the hooks that hook onto the TV wall mount.
How can I secure my TV to the stand?
0:142:55Using anti-tip safety straps to secure your TV | Samsung US - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd remind children not to climb on furniture to anchor the TV to the furniture and wall use a tipMoreAnd remind children not to climb on furniture to anchor the TV to the furniture and wall use a tip restraint strap such as a y-shaped strap tip restraints are available online and in stores.
What size is a M8 screw?
The defined diameter of metric bolts is actually slightly larger than the actual diameter of the bolt shaft. So an M8 bolt would have a shaft diameter that's slightly under 8mm which means that the bolt should fit through an 8mm hole.
Are all TV mount screws the same size?
You should know that there are multiple types of wall mounts that you can choose from. The three main types are M4, M6, and M8 size screws. All of them have different lengths and bolt sizes to fit a variety of TV wall mounts.
What size is an M6 screw?
6 mmM6 refers to a metric 6 mm screw. The outside diameter of the threads is 6 mm. The standard metric rack screw is actually an M6 x 0.1 mm. The number 0.1 mm refers to 0.1 threads per millimeter.
What if my TV doesn't have mounting holes?
If the screen does not have mounting holes, you can still attach your TV to a monitor mount with an adapter. There are VESA adapters for all popular manufacturers e.g. Apple, LG OLED, Loewe, Metz, Samsung, Sony, ViewSonic, and much more available.
Do all TVs have mount holes?
Do all TV wall mounts fit all TVs? Not all wall mounts can fit with all types of TVs. The TV brackets should fit the hole pattern on the back of the TV to work. Most of the TVs use a standard mounting pattern, called a VESA size.
How do you measure VESA screw size?
VESA specifications are typically displayed in millimeters and are read in order of the horizontal measurement followed by the vertical measurement. For example, if the distance between your TV's mounting holes measure 400mm across by 200mm high, your VESA size will be shown as 400×200.