| 1 | Black |
| 2 | Red |
| 3 | White |
| 4 | Green |
| 5 | Brown |
What are the electrical codes for wire colors?
- Black - use for line voltage or "hot" wire
- Red - a second line voltage or "hot" wire
- White - neutral
- Bare - protective ground
What are the standard electrical wire colors?
Wiring colours in the USA may be categorised as either AC or DC supply. Standard 120/208/240 Volt AC wiring colouring is shown below: Phase 1 - Black. Phase 2 - Red. Phase 3 - Blue. Neutral - White. Ground - Bare wire, green, or green with yellow stripes. Such forms of wiring are commonly found within domestic and office environments.
What are the wire color codes?
What are wire color codes?
- Phase 1 - Brown.
- Phase 2 - Black.
- Phase 3 - Grey.
- Neutral - Blue.
- Ground - Green with Yellow Stripe.
What are the color codes for house wiring?
Wire Color Codes For United StatesPhase 1: BlackPhase 2: RedPhase 3: BlueNeutral: White. A green wire, a bare wire, or a green wire with a yellow stripe is used as a ground wire. If necessary, a simple light switch wiring diagram is provided below. A dimmer switch is shown in the diagram below.
What are the wire color codes?
3-Phase Wire Color CodesPhase 1 – Black wire.Phase 2 – Red wire.Phase 3 – Blue wire.Neutral – White wire.Ground – Green, Green with a Yellow Stripe, or Bare Wire.
What is a proper color code of wires and cables?
They are as follows: Red – Red cables carry the positive current. Black – Black cables will be the negative cable. Grey or White – Grey or white cables are the ground wires.
Which color is live wire?
BrownPlug wiring coloursWireColourLiveBrownNeutralBlueEarthYellow and Green
Are electrical wires color coded?
Within the home, wires in the 120V circuits are color coded to indicate type and size, while the color of the insulation coating indicates function. Electrical wire color coding is designated by the National Electric Code (NEC).
What is standard electrical wire?
Wire Gauge The most common sizes you'll find in residential work are 14-gauge and 12-gauge. Larger appliances such as electric stoves, electric water heaters, electric dryers and central air units will often use 10-, 8- or even 6-gauge wire.
What are the Colours of 3 phase wires?
For three-phase cables the phase colours are brown, black and grey, instead of red, yellow and blue, respectively, and the neutral colour is now blue instead of black. Again the protective conductor is identified by the colour combination green-and-yellow.
What color is neutral wire?
white wireThe white wire is the "neutral" wire, it takes any unused electricity and current and sends it back to the breaker panel. The green wire (or it can sometimes be uncolored) wire is the "ground" wire, it will take electricity back to the breaker panel, then outside to a rod that's buried in the ground.
What do different wire colors mean?
Black wires are hot wires that run to the electrical outlet from the switch. Red wires are hot wires common in a 240-volt outlet or when a wall switch controls the outlet. Blue and yellow wires are hot wires for ceiling fans and three- or four-way switches. White or gray electrical wires are neutral wires.
What color are old wires?
The live wire is brown in new systems and red in old systems. The neutral wire is blue in new systems and black in old systems.
Types of Wire Color Codes
There are quite a few different wire color code standards in place, so it is important to understand which one to follow in which situation. The st...
Labeling Electrical Wires & Conduits
The wire color codes used are only going to apply to the actual wires that are carrying the electricity. In many cases, a bundle of these colored w...
Effective Training Options
Those who work directly with electrical wiring on a daily basis will need to be initially trained on what each of the wiring color codes means. Onc...
Applying Color Standards to Existing Wiring
If there are wires in a facility that were put in place prior to the standards that are now used, it is important to take steps to address this saf...
A brief history of wiring color codes
It took until 1928 for wire color coding to make its debut. The National Electrical Code® (NEC) was the first to reference it, and today continues to set the standards for the electrical industry. Following a uniform color code makes it easier to assess electrical wiring, and ensure safety among licensed professionals and homeowners alike.
The NEC wire color coding standards
Though there are international wire color codes, the U.S. follows the National Electrical Code ® (NEC). The code is identified as NFPA 70 ® because the NEC is sponsored by the National Fire Protection Association. Though not a federal law (states can choose to adopt it), it is approved by the American National Standards Institute (ANSI).
3-Phase Wire Color Codes
Whether adding a home appliance or industrial machinery, you’ll need to know these electrical wiring color codes. In the U.S., these color-coded wires carry power from a circuit breaker to a device.
How Brady can help
Just like no two electrical projects are the same, you’ll find Brady support comes in different shapes and sizes. We offer industrial label printers, cable labels, wire markers, heat shrink sleeves, electrical safety signs and software — effective and easy ways to communicate vital information, and stay safe.
What color wire should I use for a hot wire?
However, common practice (per local electrical inspectors) is for the first hot (live or active) wire to be black and the second hot to be red. The recommendations in Table below are by Wiles. He makes no recommendation for ungrounded power system colors.
What color wires are used in UK AC circuits?
US, AC: The US National Electrical Code only mandates white (or grey) for the neutral power conductor and bare copper, green, or green with yellow stripe for the protective ground. In principle any other colors except these may be used for the power conductors.
What color conductors are used for 208 VAC?
Black, red, and blue are used for 208 VAC three-phase; brown, orange and yellow are used for 480 VAC. Conductors larger than #6 AWG are only available in black and are color taped at the ends.
What color is the ground for DC power?
US DC power: The US National Electrical Code (for both AC and DC) mandates that the grounded neutral conductor of a power system be white or grey. The protective ground must be bare, green or green-yellow striped. Hot (active) wires may be any other colors except these.
What color is the neutral power conductor?
US, AC: The US National Electrical Code only mandates white (or grey) for the neutral power conductor and bare copper, green, or green with yellow stripe for the protective ground. In principle any other colors except these may be used for the power conductors.
What color is the protective ground?
The protective ground is green or green with yellow stripe. The neutral is white, the hot (live or active) single phase wires are black , and red in the case of a second active. Three-phase lines are red, black, and blue.
What color wires are used in a conduit?
Blue and Yellow Electrical Wires. While wires in these colors carry power, they are not used in typical outlet wiring. Instead, blue and yellow wires are used as the live wires pulled through a conduit.
What is red wire?
Red Electrical Wires. In 220-volt circuits, red wires are the secondary live wires. Like black wires, they can also be used in some types of switch legs. In addition, red wires are used to connect hardwired smoke detectors to the home’s power system.
What is black wire?
Black Electrical Wires. This color of wire is used to transfer power to switches and outlets in all types of circuits. Also, black wires are often used as switch legs in circuits, which is the connection linking a switch to the electrical load. Consider all black wires to be live at all times.
How do green wires work?
They connect to the grounding terminal in an outlet box and run to the ground bus bar in an electrical panel. In this way, green wires act as a failsafe, giving electricity a place to escape into the ground if a live wire within the circuit touches metal or something else conductive.
Do all wires carry current?
Just remember, all electric al wires could carry a current at some point, so treat every color wire with equal caution. If you have any hesitations at all, leave electrical work to a qualified professional.
Can white wires be connected to gray wires?
White and gray electrical wires can only be connected to one another. While they’re called “neutral” wires, they may still carry a current, especially if the current load in the circuit is unbalanced, so handle these wires cautiously.
What is the IEC DC wiring color code?
The following IEC DC wiring color codes are used for Two-Wire Grounded, Two-Wire ungrounded and Three Wire grounded DC power systems.
What color wires are used for a PG?
The mandatory colors for power wiring in National Electric Codes (NEC) are Green, Bare or Green/Yellow (Yellow Strip or band on Green) for Protective Ground “PG” and White (alternatively Grey) for Neutral Wire. Any other colors expected the above mentioned can be used for Live (Line or Hot) wires.
Which countries use the IEC color code for DC?
Other Countries like China, Russia, KSA and UAE now follow the IEC Cable color codes for DC. But don’t trust the cable insulation colors in these areas as electricians use old as well as new color codes for both AC and DC.
Does Russia use gray or purple?
Russia was following the same wiring color codes as China before but they adapted the IEC with little bit changes i.e. in a three phase system, they may use purple or gray color instead of gray in IEC. As things are little bit changed in Russia, so one must follow the tester before going in the mess.