standard 2 gang box dimensions

They are generally 2 x 3 inches in size, with depths ranging from 1 1/2 inches to 3 1/2 inches. How do you wire a 2 gang box? The two-gang box secures the outlets or switches in place. Connect the first outlet in the box. Cut the black, white and green wires into 6-inch pieces.

Full Answer

What is the size of a two gang electrical box?

Size. 3-7/8 L x 2-3/8 W x 3-5/8 D Inch. Color. Blue. What is a double gang electrical box? A square electrical box, also known as a “double-gang box,” houses two devices, either a combination outlet/switch or pair of outlets/switches in one location. The round or octagonal box houses lightweight fixtures or safety devices in ceiling such as ...

What are the dimensions of a double gang box?

What are the dimensions of a double gang electrical box? Combine High and Low Voltage Devices in One Box People Also Asked, How wide is a 2 gang electrical box? All standard size faceplates are 4.490″ in height. Gangs Width 1-Gang 2-3/4″ 2-Gang 4-1/2″ 3-Gang 6-3/8″ 4-Gang 8-3/16″ Also know, what are the dimensions of a single gang electrical box?

How wide is a 3 gang box?

Here are a couple of examples that will get you in the ballpark. An Allied triple-gang box has outside dimensions of 3 9/16 inches deep, 5 11/16 inches wide, 3 3/4 inches high, and an internal volume of 56.5 cubic inches. Likewise, what are the dimensions of a double gang electrical box?

How to wire a 2 gang outlet box?

Tips For Inserting Electrical Wires in a Box

• Bring Down Your Wire Gauge If Appropriate. Do you really need that 12 gauge wire for that circuit? ...
• Use a Larger Electrical Box. With electrical boxes, it is difficult to go wider, but you sometimes can go deeper. ...
• Reduce Sheathing Ahead of Time. Sheathing is the thick plastic coating that binds multiple wires. ...

What is the size of a standard electrical box?

2 x 3 inchesStandard rectangular boxes, also known as "single-gang" or "one-gang" boxes, are typically used for single light fixture switches and outlet receptacles. They are generally 2 x 3 inches in size, with depths ranging from 1 1/2 inches to 3 1/2 inches.

How deep is a 2 gang electrical box?

A: These boxes are a full 3.5" deep making room for the extra capacity.

How big is a double switch box?

Standard Size for Single and Two-Gang Switch/Outlet The standard size single switch or outlet cover plate is nominally 2.75 inches wide by 4.5 inches tall. The standard size two-gang switch or outlet cover plate measures 4.56 inches wide by 4.5 inches tall.

What is a 2 gang electrical box?

A square electrical box, also known as a “double-gang box,” houses two devices. They'll have a combination outlet/switch or a pair of outlets/switches inside. The round or octagonal box houses lightweight fixtures or safety devices in the ceiling. These are used for lights or smoke and carbon monoxide alarms.

Can a junction box be inside a wall?

It is against most building codes to bury a junction box in the wall. In addition to being dangerous, doing so is also impractical. If an electrician needed to access the junction box, she would need to cut a hole in the wall.

How deep are old work electrical boxes?

3-5/8-InchFrom the Manufacturer. Outlet Box; Old Work; 1 Gang; 3-7/8-Inch Length; 2-3/8-Inch Width; 3-5/8-Inch Depth; 18 Cubic-Inch Capacity; PVC Material; Blue Color; Mounting Ear, Swing Clamp Mounting; For Use With Non-Metallic Sheathed Cable; UL Approval.

What is the minimum depth of an outlet box?

Outlet boxes that do not enclose devices or utilization equipment shall have a minimum internal depth of 12.7 mm (1/2 in.).

How deep is a junction box?

2 ½” to 3 ½” deepIt's a standard electrical box usually found mounted to the framing of a home or building that contains the connection of two or more circuit cables or wires. Junction boxes are usually metal or plastic and can range from 2 ½” to 3 ½” deep.

Does a junction box have to be attached to a stud?

They don't need to be fastened to a stud, so you can install them anywhere.

What is difference between 1 gang and 2 gang?

A 1 gang switch will control a single lighting circuit, and with a 2 gang switch you can control two lighting circuits, and so on.

How many receptacles can be on a 20 amp circuit?

The answer to the question how many outlets on a 20 amp circuit is ten outlets. Always comply with the 80% circuit and breaker load rule, allowing a maximum load of 1.5 amps per receptacle. Remember that your circuit, wire sizes, and outlets must be compatible to avoid overheating and electrical hazards.

Why is it called a gang box?

Firstly, "gang" can be used to refer to the group of tools utilized for a particular project, thus making the receptacle in which they are stored the "gang box". Secondly, a gang can refer to a group of workmen or tradesmen, hence the name for where their materials or tools are kept is the gang's box.

How big is a single gang light fixture?

They are generally 2 x 3 inches in size, with depths ranging from 1 1/2 inches to 3 1/2 inches.

What is a 4 inch square box?

For this reason, 4-inch square boxes often are used to run multiple conductors in two or more directions. They are also commonly used as junction boxes and can also be installed in ceilings or walls for supporting lighting fixtures or for housing switches or receptacles when matched with the proper cover plates.

What are electrical boxes?

Electrical boxes are critical components of your home's electrical system. But for many DIYers, the wide variety of boxes is bewildering. There are plastic and metal boxes; "new work" and "old work" boxes; round, square, and octagonal boxes; and boxes with load ratings for ceiling fans and heavy light fixtures .

What is an extension ring?

Box extenders, or extension rings, come in a variety of sizes and shapes to match standard electrical boxes. They are shaped like boxes but have no back. They are designed to be installed onto the front of standard electrical boxes to increase the box capacity or to bring the box flush with the drywall or other surface material.

How much weight can a ceiling fan box hold?

Most ceiling fan boxes are rated for fans or light fixtures weighing up to 75 pounds, depending on the installation method. Boxes can be mounted directly (with four screws) to a ceiling joist or wood blocking, or they can attach to adjustable braces spanning between ceiling joists. 07 of 11.

What is Weatherpoof metal box?

Metal boxes are generally made of steel, while plastic boxes are either PVC or fiberglass. Weatherpoof metal boxes for outdoor use are generally made of aluminum. If you are using metal conduit to run wiring to the electrical box, then a metal box is required—both to anchor the conduit and because the conduit and metal box system itself may be used ...

How deep are round pans?

Round pan, or "pancake," boxes typically are only 1/2 inch or 3/4 inch deep. They are used most commonly for ceiling- or wall-mounted light fixtures that weigh no more than 50 pounds. Some types of specially rated metal pan boxes may be used for mounting ceiling fans, but not all pan boxes may be used for this purpose.

What is the thickness of an electrical box extension?

Electrical box extensions are sold in plastic and steel and in thicknesses from about 1/8" up to an inch or even more. The plastic electrical "gang box extension" shown at above left is produced by Arlington Industries but there are several manufacturers.

What is a new work box?

Normally a "new work" plastic electrical box installed during new construction is either nailed to the building framing (shown below) or if it needs to be spaced away from a stud or joist in a wall or ceiling it may be supported by a bracket that is in turn nailed to the building framing.

How many receptacles can be wired on a 15 amp circuit?

In general, the Electrical Code [NEC] allows. 10 electrical receptacles to be wired on a 15-Amp (#14 copper) wire circuit, and the Electrical Code [NEC] allows. 13 receptacles on a 20-amp (#12 copper) wire circuit.

What happens if a junction box is too small?

If the junction box is too small you face several problems such as crowding which forces wires to be jammed and bent into the box, increasing the chance of a loose connection or damaged wiring, and worse, arcing.

Do you need a metal box for a bath?

On 2020-10-06 - by (mod) -. Yes, Bob, ALL electrical wiring splices for lighting and receptacles in a building, including the bath, need to be in a metal or plastic electrical box. It's not technically difficult to add a box - use an "old work" box - those are sold with various mounting methods that make it easy.

Do electrical outlets need to be in a box?

Yes, Thomas , electrical devices such as switches and receptacles (wall plugs) need to be mounted in a code-approved plastic or metal receptacle (box) for fire safety as well as to assure that the device is mechanically secure.

What size is a junction box?

Standard North American junction boxes come in a variety of shapes and sizes (round, octagon, square, rectangular); however, most wiring devices intended for junction box mounting, save for light fixtures, are designed around the standard device yoke mounting pattern -- this is defined in NEMA WD-6 (an abridged version can be found here) as a 4.1" by 1.1" metal strap with holes at each end, on the long axis centerline, 3.75" apart and equally spaced from the short axis of symmetry. The device face itself is 2.78" by 1.625".

What is a metal box?

Metal boxes are designed for use with metal conduit or metal-sheathed cables, and thus have knockouts that can be removed to make way for conduit or cable to pass into them; non-metallic cables can be used with a metal box with a suitable cable clamp though.

What are metal boxes used for?

Even if two boxes are the same size, they may differ in other characteristics. Metal boxes are designed for use with metal conduit or metal-sheathed cables, and thus have knockouts that can be removed to make way for conduit or cable to pass into them; non-metallic cables can be used with a metal box with a suitable cable clamp though. Non-metallic boxes are typically used exclusively with non-metallic sheathed cables, and thus have built in cable clamps but no knockouts, although a few non-metallic boxes have knockouts as they are designed for use with non-metallic conduits instead of cables.

Product Overview

The Carlon Zip Box Blue 2-Gang 25 cu. in. Old Work Non-Metallic Switch and Outlet Box are designed to work with non-metallic sheathed cable in accordance with Article 314 of the NEC.

Info & Guides

You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.