The screws you need for this stand (and for all sony table top stands?) are "M5 x16" M5 being the type of screw x16 being the size (16mm). With that info I was able to source some from a local hardware store. Hope this might be helpful for someone else looking for this same information
Full Answer
What size are Sony TV stand screws?
ReplacementScrews M5 x 16mm Base Stand Screws for Many Sony TVs - Set of 4.
What size screws for TV stand mount?
The most common screw for securing the TV to the wall bracket is an M8 screw. The other screw sizes for some TVs are M4, M5, and M6. Here are 4 screw kits for mounting your TV to the wall mount bracket… The length of the screws will be in conjunction with the depth of your specific TV.
What kind of screws are used for TV stand?
Samsung TV legs generally use screws that range from M4s to M8s depending on the size of the TV. If it is smaller TV that ranges between 19 and 22 inches, then you'll want to go with M4s. If it is between 30 to 40 inches, then go with M6s. Finally, if it is a larger screen than that, M8s will work.
How do I fit a Sony TV stand?
3:458:01How to Install TV Stand for Sony X950H /X95H/X9500H Smart LED ...YouTubeStart of suggested clipEnd of suggested clipPosition now make sure that you locate. This is the base so the base is really big and you don'tMorePosition now make sure that you locate. This is the base so the base is really big and you don't want to stand under the underside the top down you want to have the base standing on the floor.
What are M6 screws?
M6 refers to a metric 6 mm screw. The outside diameter of the threads is 6 mm. The standard metric rack screw is actually an M6 x 0.1 mm. The number 0.1 mm refers to 0.1 threads per millimeter.
What size screw do I need?
The general rule of thumb is that the screw should enter at least half the thickness of the bottom material, e.g. 3/4″ into a 2 x 4. The other factor is the screw's diameter, or gauge. Screws come in gauges 2 through 16. Most of the time you'll want to go with a #8 screw.
What size is a M8 screw?
The defined diameter of metric bolts is actually slightly larger than the actual diameter of the bolt shaft. So an M8 bolt would have a shaft diameter that's slightly under 8mm which means that the bolt should fit through an 8mm hole.
What size is M4 screw?
Machine Screw: M4-0.7 Thread Size, 25 mm Lg, PEEK, Plain, Flat, Slotted, ISO 9001:2008, 10 PK.
How long is a M6 screw?
Metric threads are used outside of the USA, and commonly in products by HP and other global entities. You can identify an M6 screw by measuring the diameter with a ruler. It'll be 6 mm, or slightly more than 7/32 inches (0.228″).
Can you change the stand on a Sony Bravia TV?
Two stand options are available for each applicable model. There is no need to change the TV's feet. The feet can rotate towards the sides or the centre of the TV.
How do you fit a Sony TV to a wall bracket?
How to mount the TV on a wall.Drill 8 holes in the wall according to paper template.Attach the wall-mount base to the wall using screws. NOTE: The screws are not supplied. ... Prepare TV by attaching the stand to the rear of TV using provided parts.Install the TV on the wall and secure it with bracket cap plates.
Can you remove legs from TV?
Unscrew them as far as they will go but they may not come out. Then the leg has two little tabs that lock it in place. I believe you should lift the leg a bit away from the tv and pull down away from the screen .
Before you start
WARNING!There's a risk of damage to your TV if you don't follow the installation instructions correctly. We're not liable for any damages or injury caused by mishandling or improper installation of the wall-mount bracket.
Information about the screws, screw hole patterns, and measurements
Use the screws supplied with the wall-mount bracket specified for your TV when attaching your mount. Make sure to use the proper size and length of screws specified for your TV.
Compatibility chart
Select your TV model year for information on the compatible wall-mount bracket, supplied screws, wall mount hole pattern, length of the power cord, and TV weight without a stand.
Important information
Seller is not responsible for any damages or injuries resulting from the use of the product (s) sold. Any person who attempts to install a TV Stand, TV wall mount, or other, using hardware purchased here, needs to be capable of making a safe and secure installation.
Product description
A complete set of TV stand replacement screws for many SONY TVs. One set of metric M5 screws, 16mm length, four screws in total. Four black machine screws with washers.
Important information
Seller is not responsible for any damages or injuries resulting from the use of the product (s) sold. Any person who attempts to install a TV Stand, TV wall mount, or other, using hardware purchased here, needs to be capable of making a safe and secure installation.
Product description
A complete set of TV stand replacement screws for your Sony KDL-46V5100. One set of metric screws, four screws in total. Four black machine screws with washers.