Obtain a new small-diameter fuel line, large-diameter fuel line and filter from a small engine repair shop or hardware store. Clip one end of the new small-diameter line with scissors at a 45-degree angle. Insert the angled end of the line through the hole in the tank through which the old line passed.
Full Answer
How do you replace a fuel line on a small engine?
0:201:49Honda Small Engine Repair (Part #17701-Z0H-821) - YouTubeYouTubeStart of suggested clipEnd of suggested clipBefore you replace the fuel supply line on your engine. First make sure the engine has cooled. ForMoreBefore you replace the fuel supply line on your engine. First make sure the engine has cooled. For easier access to the supply line we recommend removing the air filter. Cover.
What size is small engine fuel line?
¼ Inch ID Fuel Line for Small Engines 6-Foot Length.
What is the best fuel line for small engines?
Small engines on your lawnmower, ATV or motorcycle use a gas-resistant vinyl tubing called Tygon. It is usually clear or transparent yellow in color and is preferred over the clear vinyl tubing you can purchase for your beer keg tap or for use as a wiring loom.
How do you fix a leaking small fuel line?
Squeeze the epoxy from the tube, applying a thin layer around the entire leak area, if it is coming from a connection point. Allow the epoxy to dry thoroughly, then tighten the bolts in place. Use a fuel resistant epoxy, found at most auto supply stores.
What size is Briggs and Stratton fuel line?
Briggs & Stratton In-Line Fuel Filter No. Briggs & Stratton In-Line Fuel Filter fits 1/4" fuel line, 80 micron filter.
What are the sizes of fuel line?
Recommended Size, Based on HorsepowerRecommended Fuel Line Size (from the tank to the pump)Engine OutputSize (inches)Size (AN)350-450 hp3/8 in.-6450-650 hp1/2 in.-8650-1,000 hp5/8 in.-101 more row•Sep 16, 2017
Is vinyl tubing good for fuel line?
No - unless specially made for this purpose do not use plain ordinary vinyl tubing for gasoline and other hydrocarbons.
Will PVC hold up to gasoline?
Due to the nature of PVC and other plastics as well, they are not well suited to use for fuel gas or kerosene. PVC and other plastics deform easily in high temperature environments, and may leak or rupture.
What is best material for fuel line?
The best fuel line material depends on your needs. However, the best material for fuel lines is polytetrafluoroethylene or PTFE. PTFE fuel line is made of plastic material specifically known as Teflon. This fuel line material is impervious is resistant to the degenerative fuel effects which could form vapor barriers.
Will flex seal work on a fuel line?
Can I Use Flex Seal Tape On My Gas Tank? No. Flex Seal Tape™ is also not resistant against a corrosive flammable such as gas or oil. Neither of the Flex Seal™ products is good on gas tanks.
Can I use JB Weld to fix a fuel line?
JB weld might work. Rough the surface up real good so the epoxy will have something to adhere to. Use brake clean to clean it.
Can you use Teflon tape on fuel lines?
To choose the appropriate thread sealant, look for its chemical resistance to fuel (diesel or gasoline) or oil running through the line. Backyard mechanics will tell you they've used regular old gas resistant teflon tape (yellow stuff) with success. This is not recommended because it risks breaking free.
How to make sure fuel lines are installed correctly?
After mixing up the fuel line orientation, performing a test is the only way to make sure that the lines are installed correctly. [Back to top] 1. Install the lines and test the orientation. Make a guess and install the lines on the carburetor.
How to determine fuel line routing for remote carburetor?
To determine the correct fuel line routing for remote primer carburetors, follow the steps below. [Back to top] 1. Test the primer assembly . Fuel only flows one way through primer assemblies. So, the first step in determining the overall fuel line routing in this type of carburetor is to determine which are the input and output sides of the primer . ...
How does a fuel bulb work?
The bulb pulls fuel through the filtered fuel line and into the carburetor and then it also pushes it out of the carburetor and out the unfiltered return line. With correct fuel line installation, fuel is pulled in through the line with the fuel filter and pushed out out the unfiltered return line. After mixing up the fuel line orientation, ...
What is the line that does not produce bubbles?
The line not producing bubbles is the one that must be attached to the carburetor, since fuel must be pulled through the carburetor and into the primer bulb. [Back to top] 2. Test the fuel line routing with the carburetor. Attach the incoming line on the primer assembly to one of the ports on the carburetor and attach a third fuel line to ...
What is a local primer carburetor?
carburetors with the primer bulb built on top of the carburetor ("local primer" carburetors) carburetors that have primer assemblies built separately from the carburetor ("remote primer" carburetors) We explain the steps to determine the correct fuel line routing below for both types of 2-cycle engine carburetors.
Do fuel lines need to come off carburetor?
Fuel lines need to come off of a carburetor for a number of repairs and maintenance procedures, and it's easy to mix up the rou ting of the fuel lines after removing them. For 2-cycle engines, there are two major carburetor designs worth discussing, each with a different fuel routing orientation: We explain the steps to determine ...
Prime Line Fuel Line
When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.
Prime Line Fuel Tubing
When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.