What kind of grouts does Sika offer?
Sika has a full range of cementitious grouts, epoxy grouts, polymethyl methacrylate (PMMA) grouts and polyurethane grouts to suit your project needs. Contact a Sika expert near you for technical support and locally available products and systems. Contact Sika's global representative in case you need our support in an international project.
What is sikafix HH hydrophilic?
SikaFix® HH Hydrophilic is a nonflammable hydrophilic polyurethane resin designed to form a flexible gasket or plug joints and cracks in concrete from water infiltration. In its uncured form, SikaFix® HH Hydrophilic is a pale yellow liquid.
What are hydrophilic and hydrophobic injection grouts?
Hydrophilic and Hydrophobic urethane injection grouts to fill joints or cracks in concrete structures that exhibit some movement or high pressure flowing water. Additives for use with SIkaGrout products to increase physical properties for specific applications.
What is sikagrout?
Superior freeze/thaw resistance. Non-shrink, non-metallic, cementitious grout that contains no chloride. With a special blend of shrinkage-reducing and plasticizing/water-reducing agents, SikaGrout compensates for shrinkage in both the plastic and hardened states.
What is hydrophobic grout?
Simply translated as a “water fearing” material, hydrophobic grouts have little to no affinity for water. These grouts need very little, if any, water to react and cure.
What is foam grout?
Polyurethane grouting is a cleaner, faster and less disruptive than cement grouting. From commercial floors to interstates, and everything in between, polyurethane grouting is. economical, fast and effective. for. correcting settlement and instability.
What is polyurethane grout?
Polyurethane grouting involves the injection of expanding polyurethane to fill and seal cracks and voids and re-level slabs.
What is grout leveling?
A-1 Concrete Leveling's primary method of leveling concrete is stone slurry grout leveling. (This is also sometimes called Mudjacking, or Pressure Grouting.) Our primary goal is to bring your uneven concrete back to, as close as possible, the original condition it was in when it was poured.
How do you apply polyurethane grout?
3:086:45ColorFast Ultra Performance Urethane Grout - YouTubeYouTubeStart of suggested clipEnd of suggested clipWork the grout diagonally. Across the joints to ensure you don't remove the grout during the installMoreWork the grout diagonally. Across the joints to ensure you don't remove the grout during the install remove excess grout from a tile surface by pulling the edge of the float. Diagonally.
Is urethane grout waterproof?
This method of urethane injection can be used for foundation wall repairs, or in this case, waterproofing. Once activated and cured, urethane grout improved the foundation of the building not only by sealing cracks and holes to prevent water infiltration, but also adding strength to the building foundation.
Is urethane grout the same as epoxy?
The epoxy is the most expensive followed by the Urethane. The tile contractor says that Urethane grout is more flexible then epoxy grout. He tells me he mainly does Epoxy grout in commercial application because it helps with chemical staining, etc... however epoxy may crack and chip away with the movement of the house.
What is Sikafix HH?
SikaFix® HH Hydrophilic is a nonflammable hydrophilic polyurethane resin designed to form a flexible gasket or plug joints and cracks in concrete from water infiltration. In its uncured form, SikaFix® HH Hydrophilic is a pale yellow liquid. When it comes in contact with water, the grout expands quickly and cures to a tough, flexible, adhesive, closed cell foam that is essentially unaffected by mildly corrosive environments.
Is grout flammable?
Contains no volatile solvents. Non-flammable. Free Foam expands to 6 times its liquid volume.
What is grout made of?
Grout is a composite material generally consisting of water, cement, and sand. It is typically used for filling voids under machines or other structural elements, sealing joints and openings in surfaces and reinforcing existing structures.
How many tons of Sikadur 31 SBA?
The new structure of the bridge is designed to meet current seismic codes. More than 120 tons of Sikadur®-31 SBA were “smeared” to each side of each precast segment prior to final placement and tensioning. Over 200’000 bags...
What is the powerhouse of Kjorbo?
Powerhouse Kjorbo is the first renovated office building in the world that produces more energy than it consumes. The demanding requirements of BREEAM-NOR was to select the best products and solutions as driving forces.
How much electricity does the Ulu Jelai dam generate?
The Ulu Jelai hydropower plant is estimated to generate average 374 GWh of electricity per annum. For the construction of the dam, a wide range of Sika concrete admixtures, anchoring, grouting and waterproofing solutions was...
Product
Sika #453579 SikaFix HH+ Hydrophobic, Expanding, Polyurethane, Chemical Grout, 100% Solids, Easy to Apply, One Component with Accelerator, Amber/Transparent Liquid Color. 5 Gallon Pail. Price/Pail.
Description
Sika #453579 SikaFix HH+ is a hydrophobic polyurethane foam grout that, when used with accelerator, is designed to stop water infiltration and fill voids outside a structure or joint and cracks in concrete structures. This product may also be used in applications with high pressure flowing water.
USES
Use to fill joints or cracks in concrete structures that exhibit some movement.
Usage
SikaCeram®-650 Colour Grout is suitable for use with most common tile such as Natural stone, marble, granite, limestone, porcelain, and mosaics.
Mixing ratio
SikaCeram®-650 Colour Grout requires 1.1 - 1.3 Litres of clean, cool, potable water per bag.