Troubleshooting Samsung Washer Problems and Repairs
- Water Pump Problem During Spin Cycle. Problem: During the spin cycle, the washer pump keeps trying to pump water out and disrupting the spin cycle.
- Bleach Spotting. Problem: After adding bleach in the bleach dispenser to clean and disinfect the washer or a load of clothes, bleach spotting occurs on future loads of laundry.
- Samsung Washer Trips Electrical Circuit. Problem: Washer trips the electrical circuit in the home when it is turned on. ...
- Water Remains in Detergent Dispenser After Every Wash. Problem: After every load of laundry, water remains in the detergent dispenser tray. ...
- Purple Streaks Left on Fabrics. Problem: Purple streaks appear on clothes after a cold water, short cycle wash. Solution: The purple streaks happen when too much laundry detergent is used.
- Washer Leaks During Rinse Cycle. Problem: Washer leaks water during the rinse cycle even after cleaning the lint trap and checking water hoses for leaks.
- Washer Stops During Spin Cycle. Problem: Washer stops during the spin cycle and becomes off-balance. The spin cycle will complete after clothes are rearranged.
- Samsung Washer Will Not Start. Problem: Washer will not start even though the display says it is ready to begin the cycle. ...
How to reset your Samsung washing machine?
SAMSUNG WASHER FIX/SOLUTION:
- Check the fuse or reset the circuit breaker.
- Straighten the drain hoses.
- Eliminate kinked hoses.
- If there is a drain restriction, troubleshoot it.
- Close the door and press the Start/Pause button.
- For your safety, your washer will not tumble or spin unless the door is closed.
How to fix Samsung washing machine?
To reset your Samsung washing machine, follow these steps:
- First, start by disconnecting the washer from its power supply. That means removing the plug from the socket or switching off the dedicated circuit breaker.
- Next, leave the machine by itself for one to five minutes. This time is required to let the machine discharge any electrical power being retained.
- Finally, switch the machine’s power back on.
How to clean your Samsung washing machine?
Washing machine has a mildew smell or visible mold
- Run a Spin-only cycle. Make sure there is not any laundry in the tub, and remove any remaining water in the tub by running a Spin-only cycle.
- Add chlorine bleach. Pour liquid chlorine bleach into the detergent compartment and fill it to the max line. ...
- Wipe down the tub. ...
What to do when Samsung washing machine does not spin?
Solution:
- Run a diagnostic test to see if any error codes appear. The failure to complete the spin cycle can be caused by a slow drain and that code will appear.
- To correct the slow drain, open the bottom panel of the washer housing. You will see a plug on the lower right. ...
- Never overload the washer. ...
How do I reset my Samsung washing machine?
How to reset Samsung washing machine eco bubble (steps)Step 1: Turn on the washing machine. You clearly simply need to press the power button to make it turn on.Step 2: Press the option button. Next, press the option button on the machine for about 5 seconds. ... Step 3: Turn the dial to factory reset. ... Step 4: Tap to reset.
What is the most common problem with washing machine?
7 Common problems with washing machineWashing machine not starting. ... Washing machine is noisy. ... Excessive vibrations during operation. ... Washing machine making noise when draining or not draining at all. ... Washing machine over-filling or under-filling. ... Washing machine not spinning. ... Water leaking from soap drawer.
Why is my Samsung washer not washing?
What you can do instead is power cycle it: Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the washer (usually 1 to 5 minutes at most), and then power it up again. This is the closest you can get to a "reset" of the washer.
How do I run a diagnostic on my Samsung washing machine?
4:227:26Samsung Front Load Washer Error Codes and Test Mode - YouTubeYouTubeStart of suggested clipEnd of suggested clipWith the screen off press and hold the spin soil level and power buttons simultaneously. For aboutMoreWith the screen off press and hold the spin soil level and power buttons simultaneously. For about five seconds to activate the quick test mode.
How do you diagnose a washing machine problem?
Washer Troubleshooting GuideCheck that the washer is plugged in securely.Check the circuit breaker or fuse box.Test the outlet for current.Check that the water supply valves are turned on.Inspect the filter screens.Test for overheating.Test the water level switch.Test the timer control.More items...
What are the four trouble symptoms of washing machine?
10 Most Common Washing Machine ProblemsIt Bounces Around. ... It's Noisy. ... Clothes Are Getting Ripped. ... Improper Or Slow Draining. ... My Washing Machine Won't Spin. ... There's No Water. ... The Door Won't Open. ... It's Smelly.More items...
Why will my Samsung Washer turn on but not start?
If the electrical outlet is receiving power, but the washer won't start, the power cord might be defective. However, this is very rare. To determine if the power cord is defective, use a multimeter to test it for the cord for power. If the power cord is not getting power, replace it.
How do I run a diagnostic on my Samsung washing machine top loader?
2:145:00Samsung washer - How to enter into Diagnostic Mode - Error CodesYouTubeStart of suggested clipEnd of suggested clipPress and hold Start for 7 to 10 seconds. It will come up with a s. At this point just press Start.MorePress and hold Start for 7 to 10 seconds. It will come up with a s. At this point just press Start. And it's going to start your test cycle.
Why is my washing machine not spinning or draining?
If your washer won't drain or spin, the water level control may be faulty. Open the machine's control panel and look for a plastic tube attached to the water level valve. If it's clogged, clear it out with vinegar. If the valve itself is corroded, it may need to be replaced.
What are washing machine error codes?
Error Codes in my Whirlpool Front Load WasherError CodeErrorrL or F34Items were detected in the washer during the Clean Washer cycle.Sud or SdThere are too many suds in the washing machine.F5 E2The door is not locking properly.F7 E1Indicates a motor speed sensing error,7 more rows•Apr 11, 2022
Is there a reset button on Samsung washing machine?
To restart the washer, press the power button on the control panel. Otherwise, if the machine has a “Cancel” button, press it to clear the error and then press the “Pause” or “Stop” button to return the machine to its default settings.
What are the codes on a Samsung washer?
Samsung Front-Load Washer Error CodesFault CodeWasher ProblemLELow water level during cyclesOEOverflow or too high water levelsnF1Hot and cold water lines are reversedtEWater temperature is either too high or too low13 more rows•Apr 14, 2022
Samsung Water Pump Issue During Spin Cycle
Problem: During the spin cycle, the washer pump keeps trying to pump water out disrupting the spin cycle.If this problem happens, it's time to do a...
Bleach Spotting After Every Use
Problem: After adding bleach in the bleach dispenser to clean and disinfect the washer or a load of clothes, bleach spotting occurs on future loads...
Samsung Washer Trips Electrical Circuit
Problem: Washer trips the electrical circuit in the home when it is turned on. There has been a recall on Samsung front load washers because water...
Water Remains in Detergent Dispenser After Every Wash
Problem: After every load of laundry, water remains in the detergent dispenser tray. It is not unusual for water to be left in a detergent, bleach,...
Purple Streaks Left on Fabrics
Problem: Purple streaks appear on clothes after a cold water, short cycle wash.The purple streaks happen when too much laundry detergent is used. O...
Washer Leaking During Rinse Cycle
Problem: Washer leaks water during the rinse cycle even after cleaning the lint trap and checking water and hoses for leaks.If a leak is going to h...
Washer Stops During Spin Cycle
Problem: Washer stops during spin cycle and becomes off-balance. Spin cycle will complete after clothes are rearranged. To solve the problem: 1. Ru...
Samsung Washer Will Not Start
Problem: Washer will not start even though the display says it is ready to begin the cycle. If the washer is receiving electrical power and everyth...
Why is there a recall on Samsung washing machines?
There has been a recall on Samsung front load washers because water leakage onto the electrical connections of the washing machine's thermal sensor can cause an electrical short and ignite the circuit board , posing a fire hazard to consumers.
Why do Samsung washers have out of balance protection?
Today's washers have out of balance protection installed to protect a washer from damaging itself during the spin cycle. Some Samsung washers add more water during the spin cycle to attempt to correct the imbalance of a small load. To solve the problem of extra water, redistribute the clothes to better balance the washer.
What happens if the washer is not level?
If the washer is not level and it is tilting to one side or forward or backward, the dispenser cups will not empty completely and you will get drips on the next load. After using the bleach dispenser, remove the dispenser cup and rinse it well or dry it with a paper towel to prevent drips.
Why does my washer have purple streaks?
Solution: The purple streaks happen when too much laundry detergent is used. One teaspoon of concentrated HE detergent is the recommended amount for a small, cold water load. Never use more than two teaspoons in a HE washer no matter the load size or water temperature.
Why does my washer leak water during the rinse cycle?
Solution: If a leak is going to happen with a front loader, it is most often during the rinse cycle because more water is used at that time.
How to clean a washer that is locked?
Solution: If the washer is receiving electrical power and everything else looks good, start by cleaning the contact points of the door latch with a bit of rubbing alcohol on a cotton swab. Even though it indicates that it is "locked", there must be full contact.
How to fix slow drain on washer?
To correct the slow drain, open the bottom panel of the washer housing. You will see a plug on the lower right. Have some towels ready to catch a gush of water and remove the plug. Clean out the filter. You may find lint, coins or buttons are obstructing the flow into the pump. Never overload the washer.
Why was my Samsung washer recalled?
Samsung front load washers have been recalled due to the risk of tripping a household electrical circuit. The main reason was the internal water leakage in the machine. If water spills on the washer’s electrical connections, it might cause the circuit board to burn, posing a fire hazard in your home.
Why do people prefer Samsung washing machines?
Many homeowners prefer Samsung because of its good reputation for making high quality and long lasting appliances. But their modern washers are not well regarded by a number of consumers. So, things can go wrong if you are not aware of the Samsung washing machine problems and how to troubleshoot them. Continue reading this guide to learn about the ...
How to clean detergent drawer on Samsung washer?
Firstly, open the detergent drawer. There will be a release lever (A) on the inside of the drawer; press it. Pull out the detergent drawer at the same time you press it.
Why does detergent stay in the dispenser?
4) The Detergent Remains in the Dispenser After the Wash Cycle. This problem occurs when there is insufficient water pressure to wash the detergent thoroughly. If you are using old detergent in the machine, it can also cause blockage in the dispenser. So, you may need a proper cleaning of the detergent drawer.
Why does my washing machine leak water?
Using too much or wrong detergent, which causes excess foaming, might also lead to leaks. So, reduce the detergent quantity or try another detergent brand to detect the real problem. If your machine uses too much water during the wash cycle, it can also cause a leak in the machine’s inner lines.
How to check if a washing machine is spinning?
To check this, you need to run a spin cycle with no load and no detergent. Once the cycle begins, keep an eye on the drum as initially the machine fills the water, and look carefully through the door to see if the drum is spinning. It is normal for the machine to stop and start several times during the rotation.
Is it normal for a Samsung washer to stop and start?
It is normal for the machine to stop and start several times during the rotation. Then, try out putting small and large loads to detect the spin cycle. Some Samsung washers operate well on large loads and require more water during the spin cycle to compensate for the small loads.
Washing Machines
Explore some useful hints and tips for setting up your washing machine, maintenance tips and easy steps to resolve error codes.
Join the Community
If your Samsung TV or other product needs to be repaired, you’re in good hands. Samsung technicians will repair it using genuine Samsung parts to fix the problem.
Request repair service
Arrange for a service visit at home, schedule a walk-in appointment or mail your device in for a repair.
Watch how-to videos
Watch our helpful videos to get the most out of your Samsung products.
Register your product
Gain access to exclusive offers and perks, apps and services, world-class customer support and more.
What to do when something goes wrong with my washing machine?
When something goes wrong with your washing machine, you may think all that's needed is a good reset. A lot of the times, weird electronic glitches (such as those that might occur after a power outage) might be cleared with such a reset, but if the issue comes back, additional troubleshooting will be required.
How to reset a washing machine?
Resetting your washing machine is easy. Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the washer (usually 1 to 5 minutes at most), and then power it up again. That's it.
Should I reset my computer at the first sign of trouble?
However, depending on what error you get, it's not always a good idea to reset at the first sign of trouble. Read on for how to reset, when you should or shouldn't, and what to do if a reset doesn't help.