How to resolve a 4E or 4C error code on a washing machine
- Fully power off your washing machine at the mains.
- Move the machine forward to give access to the water hoses.
- Check that there are no kinks or bends in the water hose connected to the machine.
How to reset your Samsung washing machine?
SAMSUNG WASHER FIX/SOLUTION:
- Check the fuse or reset the circuit breaker.
- Straighten the drain hoses.
- Eliminate kinked hoses.
- If there is a drain restriction, troubleshoot it.
- Close the door and press the Start/Pause button.
- For your safety, your washer will not tumble or spin unless the door is closed.
What does error 4C mean on Samsung washer?
Here are a few reasons why you will see a 4C error:
- There is no cold water in the system.
- The water inlet valve may have some dirt or a foreign object stuck inside.
- There could be a problem with the connections for hot and cold water. ...
- There is no water pressure or no pressure in the water supply system.
- The detergent container isn’t connected to the hose.
What does 4C mean on a Samsung washing machine?
The Samsung Washer Error Code 4C Indicates to the Water Supply Error. It means that the washer is unable to gain water for washing the clothes. It can happen during the beginning of the wash cycle or during the rinse cycle. It is very easy to identify as you can observe that no water gain from the window during the wash cycle.
How to reset Samsung washing machine error codes?
• Switch off the appliance at the mains then wait 30 seconds. Switch appliance back on again and start a new programme. • If problem persists please call the customer support team. • Switch off the appliance at the mains then wait 30 seconds. Switch appliance back on again and start a new programme.
How do you fix error code 4C on Samsung washer?
Your washing machine's mesh filter screens may be clogged. To clean them, turn off the water supply, disconnect the water supply hoses, and then clean the filter screens gently, like with a toothbrush or other similar small brush. While the water supply hoses are disconnected, check if they are kinked or clogged.
How do I fix 4C error on washing machine?
Step One – Check the Water Taps. The first step is to check if both the hot- and cold-water taps are turned on correctly. ... Step Two – Check the Water Hoses. ... Step Three – Check the Mesh Filters. ... Step Four – Clean the Detergent Tray. ... Step Five – Check the Water Pressure. ... Step Six – Reset Your Washer.
How do I reset my Samsung washing machine error code?
What you can do instead is power cycle it: Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the washer (usually 1 to 5 minutes at most), and then power it up again. This is the closest you can get to a "reset" of the washer.
How do you clean a water hose mesh filter?
To prevent water from running out due to the air pressure in the water supply hose, cover the hose connection with a cloth. Gently pull out the mesh filter(s) from the water supply intakes using a pair of pliers. And rinse they(them)m under running water until they are clean. Reinsert the mesh filter(s).
Step One – Check the Water Taps
The first step is to check if both the hot- and cold-water taps are turned on correctly. When one or both of the taps aren’t correctly turned on, the water supply to your washing machine might be adversely affected, and this can cause the 4C error code to appear.
Step Two – Check the Water Hoses
The next step is to check the water hoses to make sure they are not defective. Faulty water hoses are the main cause of the 4C error code appearing. Sometimes they can get kinked, bent out of shape, or blocked up, which causes the water to not be able to get into the washing machine correctly.
Step Three – Check the Mesh Filters
The next step is to check the mesh filters. The mesh filters are situated where the water hose connects to the washing machine.
Step Four – Clean the Detergent Tray
The next step is to clean out the detergent tray. Sometimes the detergent tray can get clogged, which stops water from being able to fill into the washer.
Step Five – Check the Water Pressure
The next step is to check the water pressure. For your washing machine to work, the water pressure needs to be at least 10 pounds per square inch (psi). When the water pressure is less than that, your washing machine might not be able to fill up with water, and the 4C error code will appear.
Step Six – Reset Your Washer
The final step after you have done all of the above is to reset your washing machine and then check if the error code is not displaying anymore.
What The 4C Code Means On A Samsung Washer
Suppose your Samsung washing machine is displaying the 4C error code. If that’s the case, that means there’s a problem with the machine’s incoming water supply.
How To Clear The 4C Error Code?
To clear the 4C error code on your Samsung washing machine, you must first resolve the root cause using the steps described above. If not, the code will continue to show regardless.
How To Reset A Samsung Washer?
Firstly, unplug your washer from its socket, or turn off the dedicated circuit breaker at your main electrical box.
How To Enter Diagnostic Mode?
After you’ve addressed the problem and reset your Samsung washer, you might want to confirm that the 4C error code has indeed been cleared. You can do this by entering the washer’s diagnostic mode to check if the 4C or other error codes are still registering in the washer.
How To Test Samsung Washer After Fixing It?
The most effective way to test your Samsung washer thoroughly after a repair is to run a complete wash cycle from start to finish. You don’t necessarily need to load anything in the washer to do this, so testing with an empty drum is perfectly fine.
Check the Water Supply to Your Samsung Washer
If you’re getting a 4C error, it could mean that the water supply to your Samsung washer is faulty. Verify that the water tap is open and running. If it is, make sure enough water is coming out and it is fully open.
Check the Water Connection On Your Samsung Washer
Your 4C error code could be the result of an improper connection. Likely, one of two things are going on here: Either the washing machine hose could be loose or not correctly inserted, or the hose or hose adapter might not be properly connected to the tap.
Avoid Heavy Laundry Loads
The type and volume of laundry in your Samsung washing machine could cause an error code 4C. This is even more likely if you can hear the sound of water filling up, yet the error persists.
Examine the Water Supply
The water inlet valve controls the flow of hot and cold water in your washing machine. When this component is not working, there might be little to no water in your Samsung washer, causing a 4C error message.
Conclusion
An error code 4C on a Samsung washing machine usually means there is a problem supplying water to the device. Possible causes include connection issues, dirty filters, and laundry that goes over the machine’s capacity. Most of these issues can be fixed without the aid of an expert, and more major problems can be referred to skilled technicians.
Error 4C: description
Error 4C means that the washing machine, for some reason, does not collect water. This is easy to understand: after all, you cannot hear the sounds of pouring water, and through the glass of the drum, you cannot see the flow of water.
Causes of Error 4C
The following reasons can cause the occurrence of such an error: 1. Lack of water supply. 2. The filter in the water inlet valve is clogged. 3. No water pressure, no pressure in the water supply. 4. The water supply hose to the washing machine is pinched
How to fix the error
The first thing to do is turn on the cold water faucet and make sure there is water in the faucet. If water enters the room, but the washing machine does not start the washing process, showing a 4C error on the screen, then it is necessary:
Did this solve your problem?
If your machine is still displaying the 4E or 4C code, it may need a service. If so, please contact Samsung Support.
Is this content helpful?
Thank you. Glad we were able to help. Your feedback helps us provide better support
How to check if a washing machine has a mesh filter?
1 Check that the water tap connected to the washing machine is open to full. 2 Check that there are no kinks or bents in the water hose connected to the machine. 3 Check to see if the water hose mesh filter is not blocked. See the steps below showing you how to do this.
How long does it take for a washing machine to cool down?
Warning: If a cycle with hot water temperature settings was run recently, the water in the washer may be very hot. Allow approximately one hour for the water to cool before performing this procedure to avoid possible injury. 1 Turn off the washing machine and check the level.