How to fix Samsung washer error code "DC"?
When your parts arrive, follow these steps to replace the suspension rods:
- Unplug the machine
- Detach the control panel secured by two Phillips head screws
- Disconnect the two existing wire harnesses
- Use a flathead screwdriver (or another flat tool) to unsecure the retaining clips
- Lift the lid and use a clamp or a large item to secure it safely in place
How to reset your Samsung washing machine?
SAMSUNG WASHER FIX/SOLUTION:
- Check the fuse or reset the circuit breaker.
- Straighten the drain hoses.
- Eliminate kinked hoses.
- If there is a drain restriction, troubleshoot it.
- Close the door and press the Start/Pause button.
- For your safety, your washer will not tumble or spin unless the door is closed.
How to fix de error on Samsung washing machine?
- The machine will be displaying the error DE.
- Check the door is shutting correctly.
- Strip down the machine to get access to the door interlock.
- Check wiring harness for signs of burnt connections or broken wires.
- Replace door lock is faulty.
- Reassemble the washing machine test the machine and make sure it starts. If all is ok problem is fixed
How to clean your Samsung washing machine?
Washing machine has a mildew smell or visible mold
- Run a Spin-only cycle. Make sure there is not any laundry in the tub, and remove any remaining water in the tub by running a Spin-only cycle.
- Add chlorine bleach. Pour liquid chlorine bleach into the detergent compartment and fill it to the max line. ...
- Wipe down the tub. ...
What does SC mean on my Samsung washer?
The SC error code indicates a drain problem. The pump is on, but the amount of water in the drum does not decrease. This happens when the pipes, fi...
What is SC in the washing machine Samsung?
SC error occurs when the washing machine cannot drain the water. The mainboard receives a signal that the water level in the drum has not decreased...
How do I fix the error SC on my Samsung washer?
If SC error occurs when the drum is empty, replace the pressure switch. If there is water in the washing machine, inspect the drainage system. If n...
Clean the Pump Filter (Front-Loader Washers)
Many Samsung front-loader washers have a pump filter or debris filter that can be accessed on the front of the washer. Samsung recommends cleaning the pump at least once a month or after 40 laundry loads. Making sure the pump filter is clean will prevent odors, mold, and mildew, and it will ensure the washer drains correctly.
Check the Drain Hose
If the washer will not drain, the drain hose may be kinked, pinched, or obstructed by a small object. It is also possible that the drain hose outlet has been submerged in water, which would restrict the washer’s draining ability. If the drain hose cannot be unclogged or connected properly, it will need to be replaced.
Check the Drain Pump
If the drain hose is not blocked, a defective drain pump may be causing the issue. A small object, article of clothing, or damaged impeller could be causing the pump to fail mechanically. If the impeller is not damaged and the pump is not being obstructed, it may have failed electrically.
Other Causes
If checking the filter, drain hose, and drain pump have failed to fix the issue, the pressure switch may be blocked or defective. The pressure switch tells the control board when to drain or add water. If the control board is receiving faulty signals, it may not be draining correctly because it does not think it needs to.
Pump Filter might be Clogged
It’s essential to check the drain filter first, as this can cause problems with the pump filter. Unscrew the door by twisting it counterclockwise.
Faulty Drain Hose
Because it could be plugged up or frozen in place, you may have issues with the drain tube itself. The hose should be correctly attached to the connector, so make sure that it is.
Clogged Pump
When small things such as coins, nails, screws, hair clips, or rubber bands get caught, they might make a continuous or intermittent pump noise.
Faulty Wire Connections
The pump does not produce any noise at all. If the SC error code appears on your Samsung washing machine, you may blame open contacts on the electrical unit.
What The SC or 5C Codes Mean On A Samsung Washer
As mentioned before, the error code is 5C, though the Samsung washer display appears to most people as “SC”. Not to worry, though, as the error code read either way means the same thing: it refers to a drainage problem.
Possible Causes and Solutions
Here are the most likely causes for the 5C error code on your Samsung washer and how you can fix them.
How To Clear the SC or 5C Error code
To clear the 5C error code on your Samsung washer, you must first resolve the cause using the steps described above.
How To Reset A Samsung Washer
You can reset your Samsung washer to clear all of the active error codes and potentially any glitches causing your machine problems.
How To Enter Diagnostic Mode
Another helpful troubleshooting step is to enter the washer’s Diagnostic Mode. In this mode, you will see all error codes that the washer has to show.
How To Test A Samsung Washer After Fixing it
The best way to test your Samsung washer after a repair is to run a complete wash cycle from start to finish. Doing that will help you confirm that all of the washer’s functions are working correctly without any problems.
Causes of Error Code SC on Samsung Washers
When Samsung washers are not used for an extended period of time, the machine may enter into a self-diagnostic cycle that detects water and heat in order to clean out any excess buildup of residue or mold. If the machine is unable to detect enough heat or water, it will alarm a SC error code as a result.
Conclusion
Samsung washers are a great investment because they’re energy efficient and durable. However, if you experience an Error Code SC on your Samsung Washer, don’t worry! With these simple troubleshooting methods, it’s easy to fix error SC or 5C or 5E in no time at all.