List of Possible Samsung Error Codes
| Error Code | Problem | Solution |
| 1C, 1E, E7 | WaterLevel Sensor | Check sensor connection |
| 3C, 3E, 3E1, 3E2, 3E3, 3E4, bE | Motor | Restart cycle |
| 4C, 4E, E1 | Water Supply | Check water connections |
| 4E1, 4E2, 4Ed, H1, HE, 4C2, HC,CE, E8 | Water temperature | Check water connections |
- 5E/SE - Draining Problems. ...
- 4E – Not Enough Water Entering Machine. ...
- dE or DC – Open Door. ...
- UE – Unbalanced Load. ...
- 3E – Faulty motor tacho. ...
- bE - Motor triac short error. ...
- OE - Too much water in machine. ...
- LE – Water Leak.
How to fix Suds error code on Samsung washing machine?
If your Samsung washing machine shows the Sud error code, you can follow these action below:
- Wait fort he suds to dissipate. The washing cycle will continue automatically. ...
- After wash cycle is completed, clean the drain filter.
- Then run your Samsung washing machine without loading any clothes in it, set a long wash cycle and high temperature and clear away the excessive powder.
How to fix Samsung washer UB error code?
Ub error – how to fix it
- Imbalanced load. ...
- If the weight of laundry exceeds the maximum load weight recommended by manufacturer, then inability of the washer to start spin mode and the UE error you see on display ...
- Insufficient load. ...
- Failure of the control module. ...
- The washing machine stands on an uneven surface. ...
How to reset your Samsung washing machine?
SAMSUNG WASHER FIX/SOLUTION:
- Check the fuse or reset the circuit breaker.
- Straighten the drain hoses.
- Eliminate kinked hoses.
- If there is a drain restriction, troubleshoot it.
- Close the door and press the Start/Pause button.
- For your safety, your washer will not tumble or spin unless the door is closed.
What are the problems with Samsung washers?
Why Samsung Washing machine Won’t Spin
- SuspensionWorn Out. ...
- Shock Absorbers (Front Loading Machine Only) There are four shock absorbers that hold the plastic drum and compensate for all vibrations coming from the drum during the spin cycle.
- Faulty Door Lock (Samsung top load washer problems spin cycle) The Samsung washers have a door lock with a switch. ...
- Broken Plastic Bracket. ...
What are the error codes for a Samsung washing machine?
Samsung Washing Machine Error CodesError CodeCauseHOTAppliance Too Hot (occurs if dryer is turned off early)LE, LE1, E9, 11EWater Leak (low water level detected during cycle)OE, E3Overflow Error (too much water/foam has entered into the appliance)OFOverflow Abnormal (water has reached the overflow level)37 more rows•Jul 4, 2016
What are washing machine error codes?
Error Codes in my Whirlpool Front Load WasherError CodeErrorSud or SdThere are too many suds in the washing machine.F5 E2The door is not locking properly.F7 E1Indicates a motor speed sensing error,F8 E1 or LO FLThe washer is sensing a low flow of water.7 more rows•Apr 11, 2022
How do I check the error code on my Samsung top load washer?
2:0916:13How to Find Samsung Washer Codes and Use Diagnostic ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll we need to do is press the spin.MoreAll we need to do is press the spin.
What are the symbols on my Samsung washing machine?
Washing Machine IconsGarment + The t-shirt with a + icon indicates you can pause the cycle to add more clothing. ... Child Lock. The smiley face icon indicates Child Lock is turned on. ... Delay Start. The clock icon indicates Delay Start is in use. ... Door Lock. ... Time Remaining. ... Signal Off. ... Pure Cycle or Self Clean. ... Extra Rinse.More items...
How do you read a washing machine code?
1:092:21How to Read a Vertical Modular Washer (VMW) Error Code DisplayYouTubeStart of suggested clipEnd of suggested clipTurn the control dial one click clockwise. Press. The start button turn the control dial one clickMoreTurn the control dial one click clockwise. Press. The start button turn the control dial one click clockwise to display the first saved error code. The control displays up to four error codes.
Why is my Samsung washing machine flashing?
2. Samsung washer spin light blinking. For the most part, this is due to improper installation of the washer or failing to balance the load. For that reason, work on balancing the load size (as explained earlier) and ensure the selected type of cycle matches what you're washing.
How do I reset my Samsung washing machine error code?
What you can do instead is power cycle it: Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the washer (usually 1 to 5 minutes at most), and then power it up again. This is the closest you can get to a "reset" of the washer.
How do I troubleshoot my Samsung front load washer?
SAMSUNG WASHER FIX/SOLUTION:Check the fuse or reset the circuit breaker.Straighten the drain hoses.Eliminate kinked hoses.If there is a drain restriction, troubleshoot it.Close the door and press the Start/Pause button.For your safety, your washer will not tumble or spin unless the door is closed.More items...•
What do washing machine symbols mean?
A square with a circle inside means that the item can be safely tumble dried, while the number of dots inside the tumble dry symbol indicates what temperature setting to use: one dot stands for low heat, two dots for medium, and three for high heat setting. No dot means that you can tumble dry your clothes on any heat.
What does signs on washing machine mean?
A snowflake, for a cold wash. A bowl with a hand, for a handwash. A key, for the child lock. An iron for the easy-ironing programme. A basin with a jet of water for the rinse cycle.
What do the symbols on a washing machine drawer mean?
Symbols on Washing Machine Detergent Drawers When it comes to putting these products in the right place, general guidelines include three symbols: I= pre wash. II= main wash. Flower symbol= fabric softener.
Why does my FlexWash machine have a 1DC4 code?
If you have a FlexWash machine, the 1dC4 code signals that the rubber button by the latch is missing. In this scenario, you simply need to replace the button.
Why is my washing machine off balance?
Your machine can be unbalanced due to being over or under-filled, or when you are washing very bulky items. The UR code means that your machine will attempt to add water to balance the load and try again.
What does dc3 mean on a washer?
Any of these codes can represent a problem with the main door of your washer, except dC3. dC3 represents an issue with the add-door. This is the small, extra door located in the washer’s main door. In some cases, dC can also signal an issue with the add-door.
How long does it take for a washer to calibrate?
Your washer detects the weight of items in the drum to determine how much water to use. Calibration mode usually lasts about one to three minutes and stops by itself.
Common Problems
In our experience with washing machine repair, there are only a few problems that cause the majority of error codes you might see.
Conclusion
If you are uncomfortable working on your Samsung washing machine, you should call a certified technician to diagnose and repair the machine.
How To Fix Samsung Washing Machine Error Code AC6
The AC6 error indicates that there is a communication problem between the display board and the machine’s control module.
How To Fix Samsung Washing Machine Error Code AE
This message indicates a communication issue between your washer’s control module and the its display board.
How To Fix Samsung Washing Machine Error Code BE2
This error code pops up when any button except the power button is held for a long period of time. The solution to this is very simple; all you need to do is unplug the machine for about 6 minutes and then plug it back again.
How To Fix Samsung Washing Machine Error Code BE1
To fix this error message you simply have to shut your washing machine down for a few minutes and then powering it up again. This message pops up if someone holds the power button down for 13 seconds or longer.
What Is SUD Error In a Samsung Washing Machine?
This error indicates that there is excessive foaming during wash cycles. This is often caused by using the wrong type of detergent in your washing machine, or filling the soap dispenser past the maximum mark.
How To Clear SUD Error In A Samsung Washer
To clear SUD errors in a Samsung washing machine, take a look at the detergent you are using. If it wasn’t made for automatic washing machines, it may cause excessive foaming.
How To Fix Samsung Washing Machine 4E Error
This message indicates that there is a problem the water supply. Most times this problem is the result of having a kinked or blocked water supply hose.
7. Code – 8E
Reason – The 8E error code indicates an excess power supply to the machine. There could be an issue with the main circuit board.
16. New Code – dE
Reason – The dE2 error is an on/off switch error. Operating the on/off button continuously can cause this error.
Why is my washer not filling up?
Water not filling up the washer. There are two common things that could happen. One of them is faulty water inlet valve, second is water tap being OFF. You need to remove the top cover on the washer and check water inlet valves for continuity with a multimeter. Don’t forget to unplug the machine.
How many rods do you need for a top load washing machine?
On top load washing machine, you need to check suspension with 4 metal rods to make sure, rods attached to the frame and not being broken. On the front load washing machine, issue can be with shock absorbers or suspension spring which holds the weight of the drum.
Resolve your washing machine error
As mentioned, the errors 4E and 4C indicate that your washing machine is not receiving enough water, and the issue is usually caused by a problem with one of the washer’s hoses. Depending on your model, the errors may also appear as nF or 1 4C. Fortunately, we have some steps to help your washing machine fill up again.
Contact Samsung Support
Contact us online through chat and get support from an expert on your computer, mobile device or tablet. Support is also available on your mobile device through the Samsung Members App.
Add Door Error
A Samsung Washer displays a ddC error code when a Add Door Error has been detected by the internal electronic diagnostics.
Samsung Washer ddC Error Code Error Code Possible Causes
Add Door lock switch terminal is broken, loose / broken wire connection. Add door lock switch fault. Main PCB fault.
Why does my refrigerator display AP?
The refrigerator will display AP when it is acting as an access point. This is so that the fridge can be set up for Wi-Fi features such as SmartThings. You usually make this code appear by pressing and holding the button indicated during SmartThings setup.
Why is my refrigerator fan not working?
Fridge Fan Error. This can potentially be caused by running the refrigerator with the door left open too long. If this occurs, unplug the refrigerator and leave the doors open for a few hours, then plug the fridge back in and close the doors and resume normal operation.
What causes a brown out on a refrigerator?
Voltage or Power Error. These errors can occur if there is a power surge or other electrical anomaly, such as a brown out, which could potentially cause a communication fault. Unplug the refrigerator or turn off power at the circuit breaker for 60 seconds, and then turn it back on.
Why is my fan freezing up?
This usually means the fan is frozen up, which can be caused by the door being left open or if there is a gap in the door gasket when it's supposed to be closed. It could also be fan motor failure.