There are different error codes for Samsung washer VRT spin cycle problems. Three types of code error are UE, UL, or dC error. These types of errors occur when you overload the machine and the drum is unable to spin.
Full Answer
How to reset a Samsung front load VRT washer?
Troubleshooting Samsung Washer Problems and Repairs
- Water Pump Problem During Spin Cycle. ...
- Bleach Spotting. ...
- Samsung Washer Trips Electrical Circuit. ...
- Water Remains in Detergent Dispenser After Every Wash. ...
- Purple Streaks Left on Fabrics. ...
- Washer Leaks During Rinse Cycle. ...
- Washer Stops During Spin Cycle. ...
- Samsung Washer Will Not Start. ...
Are Samsung good washing machines?
Samsung is making some really great products and this washing machine is no exception. " See all customer reviews Product Description Samsung’s new 5.1 cu. ft. Large Capacity Smart Top Load Washer is equipped with our ActiveWave™ Agitator that is designed to reduce noise, vibration, and tangling while delivering powerful cleaning.
What are the problems with Samsung washers?
Why Samsung Washing machine Won’t Spin
- SuspensionWorn Out. ...
- Shock Absorbers (Front Loading Machine Only) There are four shock absorbers that hold the plastic drum and compensate for all vibrations coming from the drum during the spin cycle.
- Faulty Door Lock (Samsung top load washer problems spin cycle) The Samsung washers have a door lock with a switch. ...
- Broken Plastic Bracket. ...
How to fix error code 3E on Samsung washer?
- You start a program on a Samsung automatic washing machine.
- The machine draws water and launches.
- Next, the washer drains dirty water, collects clean rinse and starts rinsing.
- The spin phase should follow, but there is no spin. The machine, twisting the drum a little, freezes, giving an error code 3e.
What are the codes on a Samsung washer?
Samsung Front-Load Washer Error CodesFault CodeWasher ProblemLELow water level during cyclesOEOverflow or too high water levelsnF1Hot and cold water lines are reversedtEWater temperature is either too high or too low13 more rows•Apr 14, 2022
How do I reset my Samsung VRT washer?
Reset your washing machine What you can do instead is power cycle it: Unplug it (or turn off power at the circuit breaker), wait some time for the electrical charge to clear out of the washer (usually 1 to 5 minutes at most), and then power it up again. This is the closest you can get to a "reset" of the washer.
How do I run diagnostics on my Samsung VRT top load washer?
4:177:26Samsung Front Load Washer Error Codes and Test Mode - YouTubeYouTubeStart of suggested clipEnd of suggested clipWith the screen off press and hold the spin soil level and power buttons simultaneously. For aboutMoreWith the screen off press and hold the spin soil level and power buttons simultaneously. For about five seconds to activate the quick test mode.
What does 1C mean on Samsung washer?
Samsung malfunction 1E or 1C This means that the water pressure or water level is not correct. First check whether the washing machine is properly connected to the water supply. The supply hose may be clogged or kinked.
How do I fix my Samsung Washer error?
On your Samsung washer, the "dE" error code typically occurs just after the rinse cycle. This will leave your machine filled with water as it does not drain because the washer thinks that the lid is open. Reset the cycle to properly drain the water then stop it before it fills up again.
How do you do a factory reset on a washing machine?
If you see no change, you can try a Master Reset. This will reset all of the onboard componentry and is often successfully used by appliance technicians. Open and close the door of the washing machine 6 times within 12 seconds. Then, run the rinse/spin cycle without clothing to see if your problems are resolved.
How do I put my Samsung washing machine in diagnostic mode?
How do I run Calibration Mode on my Samsung washing machine?1 Turn the washing machine off and then on again.2 Hold down the Temp and Delay End + buttons for 3 seconds until a CB code appears on-screen. ... 3 Press Start/Pause to run the Calibration cycle.More items...
What are washing machine error codes?
Error Codes in my Whirlpool Front Load WasherError CodeErrorrL or F34Items were detected in the washer during the Clean Washer cycle.Sud or SdThere are too many suds in the washing machine.F5 E2The door is not locking properly.F7 E1Indicates a motor speed sensing error,7 more rows•Apr 11, 2022
Why does my FlexWash machine have a 1DC4 code?
If you have a FlexWash machine, the 1dC4 code signals that the rubber button by the latch is missing. In this scenario, you simply need to replace the button.
What does dc3 mean on a washer?
Any of these codes can represent a problem with the main door of your washer, except dC3. dC3 represents an issue with the add-door. This is the small, extra door located in the washer’s main door. In some cases, dC can also signal an issue with the add-door.
How long does it take for a washer to calibrate?
Your washer detects the weight of items in the drum to determine how much water to use. Calibration mode usually lasts about one to three minutes and stops by itself.
What does 3E code mean?
*Consult your user manual for the specific 3E code meaning. The bE and 6E codes represent a motor speed sensor error. These codes can signal an overworked or faulty motor, tachometer issue, or controller error. Request service to diagnose the problem.
Why is my washing machine off balance?
Your machine can be unbalanced due to being over or under-filled, or when you are washing very bulky items. The UR code means that your machine will attempt to add water to balance the load and try again.
Why was Samsung washing machine recalled?
In 2016, Samsung issued a recall of 2.8 million top-loading washing machines made between March 2011 and April 2016 because the top can unexpectedly detach while in use, posing a risk of injury from impact, according to the United States Consumer Product Safety Commission . A complete list of recalled models can be found on the commission website.
How long does it take for a washer to fill?
If the washer takes 40 minutes or more to fill or if the water level doesn't change after six minutes, the nF code will appear. Check that the water supply faucets behind the washer are fully open and kink free. The lines can also freeze if the washer is exposed to low temperatures.
Why does my washer smell?
Too many suds. Using a regular detergent or even too much high-efficiency detergent can produce excessive suds. This extends the length of the cycle, leaves your clothes sticky and soiled from redeposited dirt, and can make your washer smell . Allow the suds to settle, and move to the spin cycle.
What happens if you force the washer door open?
Forcing the door open might damage the door lock/switch, which is often made of plastic. However, it is simple to replace and much less expensive than calling a technician. ds. Door is not locked. If the washer won't start, the ds code might appear, signaling that the washer door is open and the lock is malfunctioning.
Why is my washer overfilled?
A washer that is overfilled is usually caused by water inlet valves that are not shutting off the water flow properly. Replace the water inlet valve assembly. nF1. Hot and cold water lines are reversed. Connect the hot and cold water fill hoses correctly on the back of the washer.
What is a VRT washer?
VRT is the technology found in an innovative machine-like Samsung and Whirlpool Cabrio. The purpose of this function it’s so quiet during running. Less vibrate as compare to the other standard washers. Keep the dryer drum odor-free and always keep it fresh.
What happens if the washer door lock is defective?
If the door lock is defective, the washer door will not latch properly. The door lock can fail either mechanically or electrically. Inspect the door lock for damage. If the door lock is damaged or does not latch properly, replace it. Check out: dishwasher detergent for hard water.
Check the Laundry Load
The easiest solution to the problem is to open the washer and adjust the load. If the laundry is tangled or bunched up, or stuck to one side, correcting this will often resolve the issue. Overloading or underloading can also cause the error, so another easy solution is to either remove or add an item or two to the load to balance it out.
Reset the Washer
If you have rebalanced the load but the UB error code remains, the next thing to try is to reset the washer. Sometimes an error code is caused by a control board glitch. If there is a glitch, disconnecting the washer from the power for five minutes will allow the control board to reset.
Check That the Washer Is Level
Another cause of the UB error code is that the washer is not sitting level on the floor. The washer may have been moved recently, perhaps if you just installed the washer or if it has been moved to a different location. However, the washer can also become unbalanced over time because of the vibrations produced by the machine during a spin cycle.
Other Less Common Causes
If you have a front-loader washer, it likely has one or more shock absorbers located between the outer tub and base frame of the washer. Check that the shock absorbers are connected at both ends and that one of them is not leaking fluid.
What does the serial number on a Samsung washing machine mean?
Samsung indicates in the serial number the information about where the washing machine was assembled, the date of manufacture.
Where is the serial number on a Samsung washer?
Samsung places one sticker on the back of the washing machine, less often on the side, and another information sticker under the laundry loading hatch. Stickers may vary in shape and content. The form of the sticker varies depending on the factory where the washing machine is produced.
What is the washing machine code?
The washing machine code, information about the washing machine and the serial production number. OFF9 is the first part of the serial number, the washing machine code, it contains information about which factories supplied the washing machine parts to assemble the finished product. It is used only by the service centers or quality department.
What does the model number mean on a washing machine?
The model number of washing machines indicates the year when the model was developed and began production, since washing machines do not evolve so much , a washing machine model can be produced for several years.
What is Samsung 5AEH4?
5 is the fifth digit of 5 and indicates that it is a laundry appliance. Samsung’s number 5 refers to washing machines and clothes dryers. A – sixth character, plant code.
How to clear a fault code on a computer?
That way, the computer will reset. Then, plug the machine back in and see if the code goes away. If you give the capacitors in the control board time to discharge, sometimes this can completely clear the fault code.
Do you have to replace a control panel on a washing machine?
You will probably have to replace a control panel and door at some point. Among washing machines, this could also indicate an issue with the drain hose or drain pump. Take a closer look at the drain hose to see if the drain or pump has to be replaced.
Can a keypad be replaced in a washing machine?
The answer is that it depends on what a professional contractor has to say. First, see if the contractor actually says that the keypad has to be replaced entirely. If he or she says that, then you need to compare the cost of the keypad to the cost of actually getting an entirely new washing machine. There is a chance that replacing the control ...