What to do when Samsung washing machine does not spin?
Solution:
- Run a diagnostic test to see if any error codes appear. The failure to complete the spin cycle can be caused by a slow drain and that code will appear.
- To correct the slow drain, open the bottom panel of the washer housing. You will see a plug on the lower right. ...
- Never overload the washer. ...
Why is my Samsung washing machine not spinning?
Verify the drain hose:
- Is not inserted more than 6 inches and less than 8 inches into the standpipe or sink
- Is secured so it will not slip down farther
- Does not form an airtight connection
- Is not kinked, bent, or damaged
- Is at least 18 inches high (24 inches for wash basins)
- Is not higher than 96 inches (35 inches for wash basins)
- Is not using a drain hose extension kit
How do you fix an unbalanced Samsung washer?
How to Repair a Washing Machine that Is Unbalanced
- Check Level. Place a straight level on top of the washer to see how much off balance the washing machine is.
- Level with Legs. Most washing machines come with adjustable legs in the front and the back. ...
- Tighten Drum. There are times when washing machine drums will loosen because of it being unbalanced for a long time.
- Keep Large Items Out. ...
How to do spin only on Samsung washer?
- Power the unit on.
- Press and hold the spin key for approximately 3 seconds. A chime will sound.
- Select the spin level, if desired.
- Press the Start/Pause button.
See more
How do I fix the spin cycle on my Samsung washer?
What to do when Samsung washing machine does not spinMake sure the washer is level and adjust the leveling legs if needed.Open the door and redistribute the washing more evenly around the drum.Check that the drum is not over or under-loaded. ... Refer to the user guide to check the cycle selected. ... Open the debris filter.More items...
What causes a Samsung washer not to spin?
If your Samsung washing machine does not spin as expected during the rinsing or spinning phase of the cycle, it is most likely caused by an unbalanced load.
Why is my washing machine not spinning correctly?
An imbalanced drum is a common reason for your machine not spinning. The easiest way to avoid an imbalanced drum is by making sure you don't overload your washing machine, or if you have one large piece of laundry, add smaller pieces to balance out the load. You may also need to check that your machine is level.
Why is my washer not spinning all the water out of my clothes?
The most likely culprit for a washer that spins but still turns out soaked clothing is a drain hose problem. It could be clogged, kinked, or even positioned incorrectly if you had to remove the drain tube to make another repair already.
Why are my clothes too wet after the spin cycle?
Loading Too Many Items Overloading can lead to an imbalance that reduces the washer's spin speed, leaving clothes too wet after spin cycle completes. If the washer leaves clothes soaked after a large load, remove some items, redistribute others and run another rinse and spin cycle.
Why is my washing machine not doing a fast spin?
If lint or debris has gotten into the water level hose, then the washer may not spin fast. Clean the debris from the hose by blowing on the hose or tapping it on the side. To check the water level switch, go to the back of the washer and locate the back end of the water level hose.
Why does my Samsung washing machine keep spinning?
If your Samsung washing machine spin cycle seems to go on endlessly, it means that the load in your washer’s drum is unbalanced. This is caused by putting to many clothes in the machine. If the drum is too full, the machine will keep spinning in order to try balancing the weight.
What causes a washing machine to not spin?
Unbalanced Load In Washer. This is the most common thing that can prevent a washing machine from entering the spin cycle. If you put too many items of clothing in the washer, the drum won’t turn as it should. The same thing will happen if you don’t put enough clothes in the machine.
How to adjust the legs on a Samsung washing machine?
Here’s how to adjust the legs of your Samsung washing machine…. Step 1. Turn off your water and power supply to avoid electrocution and water spills. Step 2.
Why is my Samsung washing machine not spinning?
Sometimes it can be because there are sensors in the machine which slow or stop the spin cycle automatically if it detects an issue.
Why is my washer not spinning?
If your washer isn't spinning properly , it could be because of an unbalanced load, which makes it harder for the drum to spin. An unblanced load also cause errors. "Ub" or "Ur" display is one of the sign that your washer is unbalanced. This may be because the washer is lopsided or because the load inside is uneven.
Why won't my washer tumble?
The machine will not tumble unless the door is closed. Make sure the drain hose is not clogged. If the washer does not have enough power supplied to it, the washer will not drain or spin temporarily until it receives sufficient power to operate normally. Check the fuse or reset your circuit breaker.
What to do if your washer doesn't drain?
If your washer doesn’t drain or spin: Turn the washer off and on at the power point. Give it a few minutes before switching it on. Make sure the drain hose is straightened. If you have a kink in the hose, it may restrict any water from draining. Make sure the debris filter is not clogged.
How to clean a washing machine drum?
Step 1. Make sure the washer is level and adjust the leveling legs if needed. Step 2. Open the door and redistribute the washing more evenly around the drum. Step 3. Check that the drum is not over or under-loaded. There should be a hand’s width between the top of the laundry and the top of the drum. If washing a larger item by itself, add more ...
How to clean a debris filter on a washer?
Steps to Clean Debris filter : Step 1. Open the debris filter. Open the filter access cover located on the lower corner on the front of the washer. Step 2. Draining the drain hose. Now, find the drain hose and remove the cap. Be sure to hold the hose tip upright until you have a bowl or container in place.
What happens if the washer door lock is defective?
If the door lock is defective, the washer door will not latch properly. The door lock can fail either mechanically or electrically. Inspect the door lock for damage. If the door lock is damaged or does not latch properly, replace it. Check out: dishwasher detergent for hard water.
What is a VRT washer?
VRT is the technology found in an innovative machine-like Samsung and Whirlpool Cabrio. The purpose of this function it’s so quiet during running. Less vibrate as compare to the other standard washers. Keep the dryer drum odor-free and always keep it fresh.
How to tell if Samsung washer is worn out?
It easy to check, if they are worn out or not, by pushing down drum by hand. The drum should set the initial position, once you release it, right away, without bouncing up and down. When Samsung washer shakes during the spin cycle, due to worn shock absorbers, it will trigger vibration sensor.
Why is my washer drum wobbling?
Drum Nut Loose. Top load washer drum has a nut at the bottom, which keeps the drum in place. But when it got loose for some reason, your drum will be wobbling to the sides and especially when the washer goes to spin cycle. Make sure it’s tight enough to prevent wobbling.
What does UE mean on Samsung washing machine?
If your top loading Samsung washing machine getting UE, UL or dC error code, it means there is an issue with the “Unbalanced Load” and the washer drum unable to spin.
What is a Samsung washer door lock?
Most of the Samsung washers has door lock with feedback, its a tiny switch inside the door lock. When the door is physically closed, this switch is closed as well, providing feedback to the control board. But when the door is closed and feedback switch not physically closed, then control board see that something happened ...
How many shock absorbers are there in a washing machine?
There are 4 shock absorbers that hold the plastic drum and compensate all vibrations coming from the drum during the spin cycle. Depends on how often washing machine been used, these shock absorbers can worn out and just lost their efficiency. It easy to check, if they are worn out or not, by pushing down drum by hand.
What are the two types of washing machines?
There are two types of washing machines: top-load washer and front-load washer. Each type of washing machine has its own problem related with no spin.
Why is my Samsung washer not spinning?
The final component that might be the cause of your Samsung washer not spinning is the transmission. The problem with the transmission, however, is that it’s very difficult to test, so your only option is to replace it and then see if the problem is solved. You might be better off purchasing a new washing machine.
How to stop a washer from spinning?
Start by checking the lid switch assembly. The purpose of this component is to stop the washer from spinning when the lid is not closed properly. Sometimes it can become defective, and this will stop your washer from spinning. To test the lid switch assembly: Turn the power off to the washer.
How to check if a washer has a drive motor?
Here’s how to check the drive motor: Make sure the power is still switched off. Use a multimeter to check the drive motor to ensure it is getting power to it. If the power source is fine, you can then turn the power back on to the washer and put the washer on a cycle.
How to check if a tub is rotor or stator?
The role of the stator is to work with the rotor to help the tub rotate. Here’s how to check the stator: Locate the stator (it’s next to the rotor). Check the windings on the stator for any signs of damage or general wear and tear. If the windings are damaged, you’ll need to replace the stator.
How to check if a washer clutch is worn out?
Here’s how to check the clutch: Turn the washer on to a cycle. Check to see if the tub is rotating around. If it doesn’ t rotate at all, this means the clutch is worn out. If it rotates around but only intermittently, then the clutch is also defective.
How to check if washer belt is defective?
To check the drive belt, you need to: Ensure the washer is still turned off. Remove the top and side panels and locate the drive belt. Carefully inspect the drive belt for any signs of wear and tear or if it has snapped.
How to check if a motor coupling is damaged?
Here’s how to check the motor coupling: Make sure that the power is still turned off. Locate the motor coupling (check your manual if necessary). Inspect the motor coupling for signs of damage. If it is damaged, it will need to be replaced, and if not, move on to checking the next component.
Why won't my Samsung washing machine spin?
If your Samsung washing machine won’t finish spin cycle, it is due to an unbalanced load. You get this problem when you put a very small amount of laundry in the washer. This problem can also occur if you over-stuff the washer with a heavy load. An unbalanced load makes it hard for the washer to spin properly.
How to get water out of Samsung washing machine?
Do the following if water is stuck in your Samsung front loader washing machine…. Step 1. Turn off your washer’s water and power supply. Step 2. Get a container and some towels. Step 3. Place the towels on the ground in front of the washing machine. Step 4. Press the panel in front of your machine at the bottom.
Why is my washing machine not spinning?
Sometimes it can be because there are sensors in the machine which slow or stop the spin cycle automatically if it detects an issue.
How to clean a washing machine drum?
If this does not work: 1 Open the door and redistribute the washing more evenly around the drum. 2 Check that the drum is not over or under loaded. There should be a hand’s width between the top of the laundry and the top of the drum.
Why does a check Ub not appear?
On some appliances, a check Ub may appear to indicate an unbalanced load has been inserted, but in most situations this does NOT appear due to a reduced spin being completed and the cycle finising as normal. If this does not work:
What happens if the drum stops draining?
If the drum has stopped draining the machine will not spin properly. Normally you will see a 5C check code. But if it is draining, but doing so too slowly you may not see a check code. It is also good practice to periodically clean the filter as described in the following guide to help prevent any issues arising. 1.
Can you change the spin speed on a cotton cycle?
You can usually change this manually to choose a slower speed. On most cycles you cannot select a higher speed than preset. Typically, only a cotton cycle or dedicated spin cycle will allow a full spin speed to be selected.
Why does my Samsung washing machine shake?
This can happen when the four washing machine legs are not all making secure contact with the ground, or if a large bulky item or huge amount of laundry is in the washing machine.
What does it mean when a washing machine drum feels like it's connected to a rock?
If the drum feels like it's connected to a rock when you push against it and has almost no give at all, the shipping bolts are not removed. If you're not sure, compare it to your dryer. The washing machine's drum should have much more give than your dryer's.
Do top load washers have shipping bolts?
Some washers have 3. FlexWash models have 7. Top load washing machines do not have shipping bolts. To remove a bolt, first loosen it with the supplied spanner, then slide it and its spacer up, and finally pull it out of the hole.
How Does the Spin Cycle Work?
The spin cycle runs at the end of each wash and rinse section of the wash load. It works like a centrifuge, flinging excess water out of the clothes so they are damp when finished. This replaces wringing by hand and helps the clothes dry faster.
What Can Make the Spin Cycle Stop Working?
A reliable washing machine can handle washloads big and small. However, occasionally, there can be instances where the washload could interfere with the spin cycle.
What Is an Unbalanced Load?
An unbalanced load happens when there is an uneven distribution in the washload. When you put heavy items or too many items into the wash drum, the clothes can shift to one side. This will throw the wash drum off balance and stop the spin cycle.
How Will I Know if My Washer Has Stopped Spinning?
The most obvious sign that your washer has stopped spinning is hearing loud banging sounds coming from the machine. This is the first alert of an unbalanced load. Rearranging the clothes in the wash drum will correct the problem here.
What Is a Drum Nut, and How Do I Fix It?
The drum nut is a small fastener located at the bottom of the wash drum. This drum nut holds the wash drum in the correct position. If there is a loose or damaged drum nut, the drum will be wobbly and not work correctly. Tighten or replace the drum nut so the wash drum stays in place.
How Do I Fix a Faulty Lid Switch?
The lid switch locks the machine lid so it can process the wash cycle. When the lid is closed, the switch lock sends information to the control board to run the machine.
What if I Need to Fix the Drive Belt Too?
You can find the drive belt at the bottom of the wash drum. When it is in good condition, it helps the wash drum spin the clothes.