Receiving Helpdesk

samsung washer diagnostic test

by Mr. Braden Gleichner DDS Published 3 years ago Updated 3 years ago

Test washing machine service mode Samsung

  • Starting the testing process. Understanding how to conduct a self-diagnosis of the unit will help testing a Samsung automatic machine of the popular Eco Bubble line.
  • Linear Testing. ...
  • Checking sensors and motor. ...

Part of a video titled Samsung Front Load Washer Error Codes and Test Mode
1:33
7:26
First power on the machine. Once it is fully powered on press and hold the delay. Start button asMoreFirst power on the machine. Once it is fully powered on press and hold the delay. Start button as well as the soil. Level button as circled. If you press them simultaneously.

Full Answer

How do you test a Samsung washing machine heating element?

The spin button on the Samsung washing machine will test the heating circuit for 5 seconds by energizing the element and testing Ntc as well The heater should be drawing about 9 amp at 240 volts. the heating element is a 2000 watt element and should have an ohms reading of 28.8 or thereabout depending on age.

Why is my Samsung washer not measuring the water level?

Another possibility is the water hose is clogged, so the sensor cannot measure the water level properly. Detach the hose and blow into it to check for a clog. If the hose seems fine, you might just need to replace the sensor. If your Samsung washer displays one of these codes, search for signs of a leak.

What to do if your Samsung washer is not working?

If you are uncomfortable working on your Samsung washing machine, you should call a certified technician to diagnose and repair the machine. Although many of the Samsung washer error codes we listed can be easily fixed with a few basic tools and common sense, it may be safer to call a professional.

What are the error codes on my Samsung washer?

Complete List of Common Samsung Washer Error Codes and What To Do About Them Codes: 1E, LE, LE1, 1C, LC, LC1, 1 1C, 1 LC, E7, E9, 11E – Water Level Error or Leakage 1E, 1C, E7 — Water Level Sensor LE, LE1, E9, 11E, LC, LC1, 1LC, 11C — Low Water Level or Leak (Typically LE1 or LC1 signal a leak)

What is the test mode on a Samsung washing machine?

What is a service test on a washing machine?

How to check if a heater is working?

What does the spin mode on a water level sensor mean?

How to check water temperature in a washing machine?

What is service test on Samsung?

What does "Quick Wash" mean?

See more

How do I run a diagnostic on my Samsung top loader washing machine?

2:0916:13How to Find Samsung Washer Codes and Use Diagnostic ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll we need to do is press the spin. Button. And then that's going to take us to error codes.MoreAll we need to do is press the spin. Button. And then that's going to take us to error codes.

How do you put a washing machine in self test diagnostic mode?

0:000:48Whirlpool Washer Test/Diagnostic Mode - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou press the start button this will allow your washing machine to go into the test or diagnosticMoreYou press the start button this will allow your washing machine to go into the test or diagnostic mode and this will isolate if you're having any issues the water will run the spin cycle will engage.

How do I reset the sensor on my Samsung washer?

Perform a network resetHold Smart Control until AP displays (about 3 seconds).Hold Temp until OK displays (about 7 seconds). The display will then go back to AP.Turn off the washer. The next time you try to connect something to the washer, the Wi-Fi and network information will be refreshed.

What is diagnostic mode on washing machine?

The washer's diagnostic mode can be used to troubleshoot washer problems by viewing logged washer errors, performing an automatic diagnostic cycle, or manually turning on and off different washer parts to test for proper operation.

How do I put my LG washer in diagnostic mode?

Press the POWER to turn on the washer. Place the mouthpiece of your phone between the Smart Diagnosis logo and the POWER button. After pressing the Start Diagnosis button, press and hold the TEMP button until a countdown displays on the washer.

How do I put my Whirlpool front load washer in diagnostic mode?

0:132:03Whirlpool Duet Washer Diagnostics & Error Codes - YouTubeYouTubeStart of suggested clipEnd of suggested clipChoose any three buttons except for power or start and press them in sequence. One. Two three oneMoreChoose any three buttons except for power or start and press them in sequence. One. Two three one two three one two three. If you got it right you'll know the duet washer has three diagnostic modes.

What are the codes on a Samsung washer?

Samsung Front-Load Washer Error CodesFault CodeWasher ProblemLELow water level during cyclesOEOverflow or too high water levelsnF1Hot and cold water lines are reversedtEWater temperature is either too high or too low13 more rows•Apr 14, 2022

How do I troubleshoot my Samsung front load washer?

SAMSUNG WASHER FIX/SOLUTION:Check the fuse or reset the circuit breaker.Straighten the drain hoses.Eliminate kinked hoses.If there is a drain restriction, troubleshoot it.Close the door and press the Start/Pause button.For your safety, your washer will not tumble or spin unless the door is closed.More items...•

Is there a reset button on a washing machine?

Most newer washing machines come with a reset feature that allows you to restart the washer after it experiences an error code or fault. Causes that lead to these problems include power spikes, imbalanced loads or an interruption in power. Some machines have a button you push to reset its motor.

What does calibrating a washer do?

Except for preventing vibrations and noise, calibration also makes sure you save energy. After calibration, the load sensor more accurately weighs your laundry. This means the washing cycle can better adjust itself to to the amount of clothes, which saves time and energy.

How do you fix error F5 E3 on front load washer?

F5 E3 Error CodePower unit down by turning off the circuit breaker or unplugging for one (1) minute.Power unit up by reconnecting power.Restart a new cycle.Monitor the washer for one (1) minute to ensure the error code does not display again.

How do I reset the sensor on my Whirlpool washing machine?

Rotate your dial until you have the following three lights illuminated: RINSE, WASH, and STOP. Then turn off your washer and unplug it for ten seconds. When you turn it back on it should be reset. You can run a test load without any clothing to ensure that the reset worked.

What is the test mode on a Samsung washing machine?

The test mode of the Samsung washing machine, provided by the manufacturer of household appliances, allows you to start the unit's self-diagnosis system. Such an opportunity will help the user to check the operability of all elements of the device, to identify existing failures and shortcomings without opening the machine body. How to start a service test, we will describe further.

What is a service test on a washing machine?

The service test will tell you where to look for the main reason for the failure of the washing machine, be it problems with the inlet or drain hose, problems with the SMA motor, water level sensor or main board.

How to check if a heater is working?

The “Options” button will help you to check how the heater works. By pressing the key, you turn on the heating element for a few seconds. If no changes occur on the control panel of the machine, then the heater is in good condition. If there are any problems with the heater, the device will give an error on the heating element.

What does the spin mode on a water level sensor mean?

Setting the selector to the "Spin" mode will display on the digital display of the machine the current frequency of the signal of the water level sensor in the tank. For example, flashing 24.16 symbols on the screen will indicate that the frequency signal of the sensor is 24.16 kHz.You can check how this value changes on the drain, the frequency should increase by about 2 kHz.

How to check water temperature in a washing machine?

By clicking on it, you can observe how the tank begins to fill with water through the first section of the detergent dispenser. When the “Temperature” key is pressed again, water will be supplied through the second section of the tray. This will check both filler compartments. A third press will turn off the fluid in the drum.

What is service test on Samsung?

The service test of the Samsung machine is conventionally divided into two stages, and the first of them is the verification of the linear components of the machine. It allows you to visually verify the sufficient performance of linear components, such as:

What does "Quick Wash" mean?

Setting the program "Quick wash" will display on the screen the status of the main power board SMA. If the OT signal, or Okey Test, means the test passed well, the appearance of the NT (Not Test) icon indicates a malfunction of the board.

What to do if you see a code on your washer?

If you see one of these codes, there’s something up with the electrical current going to the washing machine. Ensure your washer is plugged directly into an outlet and on its own circuit. Do not use an extension cord.

Why is my Samsung washer flashing?

If your Samsung washer is flashing one of these codes, it signals a drainage problem. It could be that your machine is draining incorrectly or not at all.

How long does it take for a washer to calibrate?

Your washer detects the weight of items in the drum to determine how much water to use. Calibration mode usually lasts about one to three minutes and stops by itself.

Why is my washing machine off balance?

Your machine can be unbalanced due to being over or under-filled, or when you are washing very bulky items. The UR code means that your machine will attempt to add water to balance the load and try again.

What does dc3 mean on a washer?

Any of these codes can represent a problem with the main door of your washer, except dC3. dC3 represents an issue with the add-door. This is the small, extra door located in the washer’s main door. In some cases, dC can also signal an issue with the add-door.

Why does my FlexWash machine have a 1DC4 code?

If you have a FlexWash machine, the 1dC4 code signals that the rubber button by the latch is missing. In this scenario, you simply need to replace the button.

Does Samsung washing machine have errors?

There are a vast number of errors that relate to sensors and other electronic components of the Samsung washing machine.

What to do if you are uncomfortable with your Samsung washing machine?

If you are uncomfortable working on your Samsung washing machine, you should call a certified technician to diagnose and repair the machine.

What causes a washer to be unbalanced?

When loading your washer with clothes, make sure they are evenly spread out and there are not too many heavy items on the same side. A heavy sweater, coat or even jeans can cause the washer to become unbalanced and trigger an error code.

Can you see error code on Samsung washer?

Depending on the age of your washer, you may see a different error code. Unfortunately, when Samsung changes their appliance design and as technology improves, so do their error codes. This can make it difficult to sort out which error code you are seeing and the possible problem.

How long to press wet dry and time on Samsung dryer?

Pressing the wet-dry and time (-) keys for 5 seconds, place the machine in the diagnostic mode- Samsung dryer diagnostic mode

How to clear diagnostic codes?

To clear the list of diagnostic codes, press Wrinkle prevention, and very dry (>) for 5 seconds while looking at the list.

How long does it take for a washing machine to turn off?

pressed, the control will reset to the normal mode. If no more activity is observed. after an additional 5 minutes, the washing machine to turn off.

What does C1 mean in a laundry test?

C1 or CL1: Laundry is detected inside the drum. The drum must be empty to run the test.

How to check if dryer is low heat?

For most models without a vent blockage test, the way to check if your vent is causing a low heat issue is to see if your dryer's heater performs better when the vent is disconnected. Disconnect the exhaust vent from the dryer. Run a Time Dry cycle for at least 30 seconds. (Make sure the Eco Dry setting is turned off, if your model has it.)

How to turn on a dryer?

Press POWER to turn the dryer on and within 5 seconds, press and hold Adjust Time Up + Dry Level until InS or In appears on the display.

What does "CLG" mean on dryer?

If the duct system cannot exhaust properly, you will see "CLg" or "Cg" (which might look like "CL9" or "C9") on the display and hear an alarm chime. You will need to clean your dryer's exhaust vent. If the door is open, "dc" will appear on the display.

How long does a vent blockage test take?

Press and hold START/PAUSE to start the Vent Blockage test which lasts for approximately 2 minutes. Do not open the door during the test.

What is the test mode on a Samsung washing machine?

The test mode of the Samsung washing machine, provided by the manufacturer of household appliances, allows you to start the unit's self-diagnosis system. Such an opportunity will help the user to check the operability of all elements of the device, to identify existing failures and shortcomings without opening the machine body. How to start a service test, we will describe further.

What is a service test on a washing machine?

The service test will tell you where to look for the main reason for the failure of the washing machine, be it problems with the inlet or drain hose, problems with the SMA motor, water level sensor or main board.

How to check if a heater is working?

The “Options” button will help you to check how the heater works. By pressing the key, you turn on the heating element for a few seconds. If no changes occur on the control panel of the machine, then the heater is in good condition. If there are any problems with the heater, the device will give an error on the heating element.

What does the spin mode on a water level sensor mean?

Setting the selector to the "Spin" mode will display on the digital display of the machine the current frequency of the signal of the water level sensor in the tank. For example, flashing 24.16 symbols on the screen will indicate that the frequency signal of the sensor is 24.16 kHz.You can check how this value changes on the drain, the frequency should increase by about 2 kHz.

How to check water temperature in a washing machine?

By clicking on it, you can observe how the tank begins to fill with water through the first section of the detergent dispenser. When the “Temperature” key is pressed again, water will be supplied through the second section of the tray. This will check both filler compartments. A third press will turn off the fluid in the drum.

What is service test on Samsung?

The service test of the Samsung machine is conventionally divided into two stages, and the first of them is the verification of the linear components of the machine. It allows you to visually verify the sufficient performance of linear components, such as:

What does "Quick Wash" mean?

Setting the program "Quick wash" will display on the screen the status of the main power board SMA. If the OT signal, or Okey Test, means the test passed well, the appearance of the NT (Not Test) icon indicates a malfunction of the board.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9