Full Answer
How do I Reset my Samsung top load washer?
Verify the wash cycle is complete.
- It may take a few moments for the door lock mechanism to disengage.
- Make sure the door lock light is off. This light turns off after the washer has drained.
- If the washer is paused after the water is supplied, the door cannot be opened until one minute has passed.
How do you fix an unbalanced Samsung washer?
How to Repair a Washing Machine that Is Unbalanced
- Check Level. Place a straight level on top of the washer to see how much off balance the washing machine is.
- Level with Legs. Most washing machines come with adjustable legs in the front and the back. ...
- Tighten Drum. There are times when washing machine drums will loosen because of it being unbalanced for a long time.
- Keep Large Items Out. ...
What are the problems with Samsung washers?
Why Samsung Washing machine Won’t Spin
- SuspensionWorn Out. ...
- Shock Absorbers (Front Loading Machine Only) There are four shock absorbers that hold the plastic drum and compensate for all vibrations coming from the drum during the spin cycle.
- Faulty Door Lock (Samsung top load washer problems spin cycle) The Samsung washers have a door lock with a switch. ...
- Broken Plastic Bracket. ...
Does Samsung make good washers?
- Samsung - 4.2 Cu. Ft.
- Ft. 14-Cycle Front-Loading Washer - Black stainless steel.
- Ft. 12-Cycle Front-Loading Smart Wi-Fi Washer with Steam and 6Motion Technology - Graphite Steel.
- Ft. 12-Cycle Front-Loading Smart Wi-Fi Washer with Steam and 6Motion Technology - White.
- Whirlpool - Cabrio 4.3 Cu. Ft.
How do I run a diagnostic on my Samsung washing machine top loader?
2:145:00Samsung washer - How to enter into Diagnostic Mode - Error CodesYouTubeStart of suggested clipEnd of suggested clipPress and hold Start for 7 to 10 seconds. It will come up with a s. At this point just press Start.MorePress and hold Start for 7 to 10 seconds. It will come up with a s. At this point just press Start. And it's going to start your test cycle.
How do I reset my Samsung top load washer?
Perform a network resetHold Smart Control until AP displays (about 3 seconds).Hold Temp until OK displays (about 7 seconds). The display will then go back to AP.Turn off the washer. The next time you try to connect something to the washer, the Wi-Fi and network information will be refreshed.
Why is my Samsung washing machine not draining or spinning?
If your washer doesn't drain or spin: Make sure the drain hose is straightened. If you have a kink in the hose, it may restrict any water from draining. Make sure the debris filter is not clogged. If you are able to open and close the door, close it and press START/PAUSE.
Why is my Samsung washer not washing properly?
If the washer is overloaded, detergent may not reach all of the clothes in the load. If the washer is underloaded, it is very likely that too much detergent will be used. An unlevel washer could prevent detergent from dispensing correctly, or reduce spin speed because of wobbling and vibration.
Is there a reset button on a washing machine?
Most newer washing machines come with a reset feature that allows you to restart the washer after it experiences an error code or fault. Causes that lead to these problems include power spikes, imbalanced loads or an interruption in power. Some machines have a button you push to reset its motor.
Why is my washing machine not starting?
0:121:52Top-Load Washer Won't Start — Washing Machine TroubleshootingYouTubeStart of suggested clipEnd of suggested clipYou should first determine if the electrical outlet the appliance is plugged into is getting powerMoreYou should first determine if the electrical outlet the appliance is plugged into is getting power if not check to see if the circuit breaker has tripped.
Why is my washing machine not spinning or draining?
If your washer won't drain or spin, the water level control may be faulty. Open the machine's control panel and look for a plastic tube attached to the water level valve. If it's clogged, clear it out with vinegar. If the valve itself is corroded, it may need to be replaced.
Why is my top loader not spinning?
If the belt mechanism is loose or slipped or the belt is damaged, it may not be spinning with enough force. If the belt is broken or fully off the rollers, then it won't spin at all. A washer that won't spin isn't washing. If it can't agitate clothes, then clothes don't get clean.
How do I force my Samsung washer to drain?
To drain your washer in an emergency, follow these steps:1 Unplug the washing machine from the power supply.2 Open the filter-cover.3 Unscrew the emergency drain cap by turning it to the left.4 Grip the cap on the end of the emergency drain tube, and then slowly pull it out about 15 cm (about 6 inches).More items...•
What is the average life of a Samsung washing machine?
It is typically recommended to replace any large appliance, such as a washing machine, every eight years, but your washing machine could potentially last up to 14 years with proper upkeep and maintenance.
Why are my clothes still dirty after washing?
The reason for this is most likely because you overloaded the washer. Overloading your machine won't allow it to wash your load completely, which will cause you to have to wash the clothes again – or walk around with dirty clothes on.
Why does my washer fill up with water then stop?
Your washer may have a clogged drain hose or the pump may be broken. A broken lid switch or belt could also be the culprit. It may even be something as simple as the hose being jammed. Whatever the reason, the water will need to be drained from the washing machine before any work or diagnosis can be done.
Samsung Water Pump Issue During Spin Cycle
Problem: During the spin cycle, the washer pump keeps trying to pump water out disrupting the spin cycle.If this problem happens, it's time to do a...
Bleach Spotting After Every Use
Problem: After adding bleach in the bleach dispenser to clean and disinfect the washer or a load of clothes, bleach spotting occurs on future loads...
Samsung Washer Trips Electrical Circuit
Problem: Washer trips the electrical circuit in the home when it is turned on. There has been a recall on Samsung front load washers because water...
Water Remains in Detergent Dispenser After Every Wash
Problem: After every load of laundry, water remains in the detergent dispenser tray. It is not unusual for water to be left in a detergent, bleach,...
Purple Streaks Left on Fabrics
Problem: Purple streaks appear on clothes after a cold water, short cycle wash.The purple streaks happen when too much laundry detergent is used. O...
Washer Leaking During Rinse Cycle
Problem: Washer leaks water during the rinse cycle even after cleaning the lint trap and checking water and hoses for leaks.If a leak is going to h...
Washer Stops During Spin Cycle
Problem: Washer stops during spin cycle and becomes off-balance. Spin cycle will complete after clothes are rearranged. To solve the problem: 1. Ru...
Samsung Washer Will Not Start
Problem: Washer will not start even though the display says it is ready to begin the cycle. If the washer is receiving electrical power and everyth...
How Does the Spin Cycle Work?
The spin cycle runs at the end of each wash and rinse section of the wash load. It works like a centrifuge, flinging excess water out of the clothes so they are damp when finished. This replaces wringing by hand and helps the clothes dry faster.
What Can Make the Spin Cycle Stop Working?
A reliable washing machine can handle washloads big and small. However, occasionally, there can be instances where the washload could interfere with the spin cycle.
What Is an Unbalanced Load?
An unbalanced load happens when there is an uneven distribution in the washload. When you put heavy items or too many items into the wash drum, the clothes can shift to one side. This will throw the wash drum off balance and stop the spin cycle.
How Will I Know if My Washer Has Stopped Spinning?
The most obvious sign that your washer has stopped spinning is hearing loud banging sounds coming from the machine. This is the first alert of an unbalanced load. Rearranging the clothes in the wash drum will correct the problem here.
What Is a Drum Nut, and How Do I Fix It?
The drum nut is a small fastener located at the bottom of the wash drum. This drum nut holds the wash drum in the correct position. If there is a loose or damaged drum nut, the drum will be wobbly and not work correctly. Tighten or replace the drum nut so the wash drum stays in place.
How Do I Fix a Faulty Lid Switch?
The lid switch locks the machine lid so it can process the wash cycle. When the lid is closed, the switch lock sends information to the control board to run the machine.
What if I Need to Fix the Drive Belt Too?
You can find the drive belt at the bottom of the wash drum. When it is in good condition, it helps the wash drum spin the clothes.
Why was my Samsung washer recalled?
Samsung front load washers have been recalled due to the risk of tripping a household electrical circuit. The main reason was the internal water leakage in the machine. If water spills on the washer’s electrical connections, it might cause the circuit board to burn, posing a fire hazard in your home.
How to clean detergent drawer on Samsung washer?
Firstly, open the detergent drawer. There will be a release lever (A) on the inside of the drawer; press it. Pull out the detergent drawer at the same time you press it.
Why do people prefer Samsung washing machines?
Many homeowners prefer Samsung because of its good reputation for making high quality and long lasting appliances. But their modern washers are not well regarded by a number of consumers. So, things can go wrong if you are not aware of the Samsung washing machine problems and how to troubleshoot them. Continue reading this guide to learn about the ...
Why does detergent stay in the dispenser?
4) The Detergent Remains in the Dispenser After the Wash Cycle. This problem occurs when there is insufficient water pressure to wash the detergent thoroughly. If you are using old detergent in the machine, it can also cause blockage in the dispenser. So, you may need a proper cleaning of the detergent drawer.
Why does my washing machine leak water?
Using too much or wrong detergent, which causes excess foaming, might also lead to leaks. So, reduce the detergent quantity or try another detergent brand to detect the real problem. If your machine uses too much water during the wash cycle, it can also cause a leak in the machine’s inner lines.
How to check if a washing machine is spinning?
To check this, you need to run a spin cycle with no load and no detergent. Once the cycle begins, keep an eye on the drum as initially the machine fills the water, and look carefully through the door to see if the drum is spinning. It is normal for the machine to stop and start several times during the rotation.
Is it normal for a Samsung washer to stop and start?
It is normal for the machine to stop and start several times during the rotation. Then, try out putting small and large loads to detect the spin cycle. Some Samsung washers operate well on large loads and require more water during the spin cycle to compensate for the small loads.
Request repair service
Arrange for a service visit at home, schedule a walk-in appointment or mail your device in for a repair.
Watch how-to videos
Watch our helpful videos to get the most out of your Samsung products.
Register your product
Gain access to exclusive offers and perks, apps and services, world-class customer support and more.