Full Answer
How do I Reset my Samsung top load washer?
Verify the wash cycle is complete.
- It may take a few moments for the door lock mechanism to disengage.
- Make sure the door lock light is off. This light turns off after the washer has drained.
- If the washer is paused after the water is supplied, the door cannot be opened until one minute has passed.
How do you fix an unbalanced Samsung washer?
How to Repair a Washing Machine that Is Unbalanced
- Check Level. Place a straight level on top of the washer to see how much off balance the washing machine is.
- Level with Legs. Most washing machines come with adjustable legs in the front and the back. ...
- Tighten Drum. There are times when washing machine drums will loosen because of it being unbalanced for a long time.
- Keep Large Items Out. ...
What are the problems with Samsung washers?
Why Samsung Washing machine Won’t Spin
- SuspensionWorn Out. ...
- Shock Absorbers (Front Loading Machine Only) There are four shock absorbers that hold the plastic drum and compensate for all vibrations coming from the drum during the spin cycle.
- Faulty Door Lock (Samsung top load washer problems spin cycle) The Samsung washers have a door lock with a switch. ...
- Broken Plastic Bracket. ...
Does Samsung make good washers?
- Samsung - 4.2 Cu. Ft.
- Ft. 14-Cycle Front-Loading Washer - Black stainless steel.
- Ft. 12-Cycle Front-Loading Smart Wi-Fi Washer with Steam and 6Motion Technology - Graphite Steel.
- Ft. 12-Cycle Front-Loading Smart Wi-Fi Washer with Steam and 6Motion Technology - White.
- Whirlpool - Cabrio 4.3 Cu. Ft.
Do Samsung washers have issues?
There has been a recall on Samsung front load washers because water leakage onto the electrical connections of the washing machine's thermal sensor can cause an electrical short and ignite the circuit board, posing a fire hazard to consumers.
What is the most common problem with washing machine?
7 Common problems with washing machineWashing machine not starting. ... Washing machine is noisy. ... Excessive vibrations during operation. ... Washing machine making noise when draining or not draining at all. ... Washing machine over-filling or under-filling. ... Washing machine not spinning. ... Water leaking from soap drawer.
Is there any recalls on Samsung washers?
Affected Models This is a recall of certain Top-Load washers manufactured between March, 2011 and October 2016. Front Load Washers are not affected. NEW SAMSUNG TOP LOAD WASHERS CURRENTLY SOLD AT RETAILERS ARE NOT AFFECTED BY THIS RECALL.
How do I troubleshoot my Samsung top load washer?
0:513:02Samsung Top Load Washing Machine: How to Troubleshoot ... - YouTubeYouTubeStart of suggested clipEnd of suggested clipCheck the inlet holes filter. The machine may not get enough water if inlet hose is twisted kinkedMoreCheck the inlet holes filter. The machine may not get enough water if inlet hose is twisted kinked or blocked therefore it is advised to check the condition of the pipe.
What are the errors in Samsung washing machine?
Samsung Washing Machine Error CodesError CodeCauseHOTAppliance Too Hot (occurs if dryer is turned off early)LE, LE1, E9, 11EWater Leak (low water level detected during cycle)OE, E3Overflow Error (too much water/foam has entered into the appliance)OFOverflow Abnormal (water has reached the overflow level)37 more rows•Jul 4, 2016
How do I run a diagnostic on my Samsung washing machine?
2:0912:58Samsung washing machine diagnostic mode How to check error ...YouTubeStart of suggested clipEnd of suggested clipButton one button two button three and the start pause button the temperature or button one controlsMoreButton one button two button three and the start pause button the temperature or button one controls the fill cycle and tests all the water valve.
Is there a class action lawsuit against Samsung washers?
(Reuters) - A federal appeals court has upheld a settlement resolving claims that certain Samsung Group washing machines were prone to exploding, over the objection of a class member who said that agreements between Samsung and class counsel that deprived class members of more than $2 million in potential recovery.
Why are Samsung washers exploding?
0:002:04Samsung washer explodes - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut as news 8's Bradley Blackburn found out potentially dangerous washers. They're still spinningMoreBut as news 8's Bradley Blackburn found out potentially dangerous washers. They're still spinning metal warped parts destroyed all that power from a washer.
How long is a Samsung washer warranty?
one yearSamsung Washer Warranty Overview Most Samsung washers come with a basic warranty of one year. These warranties differ depending on the make and model of the product in question, and all warranties are valid only for products purchased and used in the United States.
Why will my Samsung Washer turn on but not start?
If the electrical outlet is receiving power, but the washer won't start, the power cord might be defective. However, this is very rare. To determine if the power cord is defective, use a multimeter to test it for the cord for power. If the power cord is not getting power, replace it.
Why won't my Samsung washer spin and drain?
If your washer doesn't drain or spin: Make sure the drain hose is straightened. If you have a kink in the hose, it may restrict any water from draining. Make sure the debris filter is not clogged. If you are able to open and close the door, close it and press START/PAUSE.
What would cause my Samsung Washer to not spin?
If your Samsung washing machine does not spin as expected during the rinsing or spinning phase of the cycle, it is most likely caused by an unbalanced load.
Samsung Water Pump Issue During Spin Cycle
Problem: During the spin cycle, the washer pump keeps trying to pump water out disrupting the spin cycle.If this problem happens, it's time to do a...
Bleach Spotting After Every Use
Problem: After adding bleach in the bleach dispenser to clean and disinfect the washer or a load of clothes, bleach spotting occurs on future loads...
Samsung Washer Trips Electrical Circuit
Problem: Washer trips the electrical circuit in the home when it is turned on. There has been a recall on Samsung front load washers because water...
Water Remains in Detergent Dispenser After Every Wash
Problem: After every load of laundry, water remains in the detergent dispenser tray. It is not unusual for water to be left in a detergent, bleach,...
Purple Streaks Left on Fabrics
Problem: Purple streaks appear on clothes after a cold water, short cycle wash.The purple streaks happen when too much laundry detergent is used. O...
Washer Leaking During Rinse Cycle
Problem: Washer leaks water during the rinse cycle even after cleaning the lint trap and checking water and hoses for leaks.If a leak is going to h...
Washer Stops During Spin Cycle
Problem: Washer stops during spin cycle and becomes off-balance. Spin cycle will complete after clothes are rearranged. To solve the problem: 1. Ru...
Samsung Washer Will Not Start
Problem: Washer will not start even though the display says it is ready to begin the cycle. If the washer is receiving electrical power and everyth...
How Does the Spin Cycle Work?
The spin cycle runs at the end of each wash and rinse section of the wash load. It works like a centrifuge, flinging excess water out of the clothes so they are damp when finished. This replaces wringing by hand and helps the clothes dry faster.
What Can Make the Spin Cycle Stop Working?
A reliable washing machine can handle washloads big and small. However, occasionally, there can be instances where the washload could interfere with the spin cycle.
What Is an Unbalanced Load?
An unbalanced load happens when there is an uneven distribution in the washload. When you put heavy items or too many items into the wash drum, the clothes can shift to one side. This will throw the wash drum off balance and stop the spin cycle.
How Will I Know if My Washer Has Stopped Spinning?
The most obvious sign that your washer has stopped spinning is hearing loud banging sounds coming from the machine. This is the first alert of an unbalanced load. Rearranging the clothes in the wash drum will correct the problem here.
What Is a Drum Nut, and How Do I Fix It?
The drum nut is a small fastener located at the bottom of the wash drum. This drum nut holds the wash drum in the correct position. If there is a loose or damaged drum nut, the drum will be wobbly and not work correctly. Tighten or replace the drum nut so the wash drum stays in place.
How Do I Fix a Faulty Lid Switch?
The lid switch locks the machine lid so it can process the wash cycle. When the lid is closed, the switch lock sends information to the control board to run the machine.
What if I Need to Fix the Drive Belt Too?
You can find the drive belt at the bottom of the wash drum. When it is in good condition, it helps the wash drum spin the clothes.
Why was my Samsung washer recalled?
Samsung front load washers have been recalled due to the risk of tripping a household electrical circuit. The main reason was the internal water leakage in the machine. If water spills on the washer’s electrical connections, it might cause the circuit board to burn, posing a fire hazard in your home.
Why do people prefer Samsung washing machines?
Many homeowners prefer Samsung because of its good reputation for making high quality and long lasting appliances. But their modern washers are not well regarded by a number of consumers. So, things can go wrong if you are not aware of the Samsung washing machine problems and how to troubleshoot them. Continue reading this guide to learn about the ...
How to clean detergent drawer on Samsung washer?
Firstly, open the detergent drawer. There will be a release lever (A) on the inside of the drawer; press it. Pull out the detergent drawer at the same time you press it.
Why does detergent stay in the dispenser?
4) The Detergent Remains in the Dispenser After the Wash Cycle. This problem occurs when there is insufficient water pressure to wash the detergent thoroughly. If you are using old detergent in the machine, it can also cause blockage in the dispenser. So, you may need a proper cleaning of the detergent drawer.
Why does my washing machine leak water?
Using too much or wrong detergent, which causes excess foaming, might also lead to leaks. So, reduce the detergent quantity or try another detergent brand to detect the real problem. If your machine uses too much water during the wash cycle, it can also cause a leak in the machine’s inner lines.
How to check if a washing machine is spinning?
To check this, you need to run a spin cycle with no load and no detergent. Once the cycle begins, keep an eye on the drum as initially the machine fills the water, and look carefully through the door to see if the drum is spinning. It is normal for the machine to stop and start several times during the rotation.
Is it normal for a Samsung washer to stop and start?
It is normal for the machine to stop and start several times during the rotation. Then, try out putting small and large loads to detect the spin cycle. Some Samsung washers operate well on large loads and require more water during the spin cycle to compensate for the small loads.
Request repair service
Arrange for a service visit at home, schedule a walk-in appointment or mail your device in for a repair.
Watch how-to videos
Watch our helpful videos to get the most out of your Samsung products.
Register your product
Gain access to exclusive offers and perks, apps and services, world-class customer support and more.