Control board reset Errors
| Code | Error |
| HC2 | Gas Ignition |
| oD | Dry time error |
| 3C | Motor Error |
| 1AC7 | Electronic Control Error |
How to reset your Samsung dryer?
Outside of discarding the lint from the dryer lint trap (which you should always do, by the way), cleaning your dryer may not seem like an important thing to do, but for the functionality of your dryer, as well as your personal safety, it matters.
How to reset Samsung dryer HC error code?
The F5 E3 alert indicates there is issue with the lid lock. Remove any objects from the lid and clear any obstructions. Touch POWER to exit cycle, then touch POWER again to release lid. If this is unsuccessful, reboot the machine by unplugging the washer and wait two minutes before plugging the machine back in.
What does this error code mean on my Samsung dryer?
Here are some examples:
- 3C - Motor Error
- oD - Dry Time Error
- 1 AC7 - Electronic Control Error
- HC2 - Gas Ignition Error
How to troubleshoot a Samsung dryer that is not heating?
Why is the Samsung dryer not heating?
- Blockage in vent line. Samsung dryer not heating cooling light on. ...
- Solution. A simple solution when the vent line of the dryer is clogged. ...
- Thermostat not working properly. ...
- Problem in thermal cut-off fuse. ...
- Elements are overheating/Heating Element. ...
- Inside wires connection problem. ...
How do I reset my Samsung Multisteam dryer?
0:272:34Samsung dryer not turning on - perform System Reset - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd from here direct your attention to the power button i want you to push and hold for five.MoreAnd from here direct your attention to the power button i want you to push and hold for five. Seconds after that come down to the start pause button push and hold for an additional.
What does the code on Samsung dryer mean?
The hE error code indicates that your machine is overheating. A clogged vent or lint screen could be the cause of this. You can resolve this issue by cleaning the vent system, the lint screen, or both. A faulty thermistor is easy to spot, especially if your dryer cycle is not working.
Does a dryer have a reset button?
Often, dryers are equipped with a reset button on the control panel. If the motor won't run, let the dryer cool for about ten minutes. Then press this reset button.
How do I troubleshoot my Samsung dryer?
0:007:17Samsung Dryer Won't Start or Spin - Troubleshooting and Repair GuideYouTubeStart of suggested clipEnd of suggested clipAnd it should be tight and when you spin the drum the belt should spin with it. And that's going toMoreAnd it should be tight and when you spin the drum the belt should spin with it. And that's going to tell you you don't have a blower wheel obstruction that'll cause the dryer not to start ok.
Samsung dryer error code reset
We know the Samsung brand for its quality products, and their extensive line of dryers is no exception. With innovative design and smart technology...
How Samsung dryers work
You rely on your washer and clothes dryer to keep your clothing and other laundry items fresh and clean. Like other major home appliances, it can d...
What resetting your Samsung dryer can't do
Resetting can give your dryer a new start when other attempts fail. Sometimes, electrical glitches or a power outage can make your dryer behave in...
Understanding Samsung dryer error code
Samsung dryer error codes can alert you of specific issues with your appliance. Resetting the dryer clears codes, so it’s important to troubleshoot...
How to reset your Samsung dryer
Resetting the dryer is a simple, quick process. To reset your Samsung dryer, simply unplug the appliance from its power supply. The electrical char...
Protect your Samsung dryer from expensive repairs with Cinch
Even with proper care and maintenance, major household appliances may have issues and leave you in a pinch. You rely on these appliances every day,...
What does error code mean on dryer?
This code means the dryer's internal components cannot communicate with each other. Shut off the dryer for 60 seconds, and then turn it back on again. If the error code remains, visit the Support Center to request service.
What to do if your dryer is not using an extension cord?
If you get this error, check that the dryer is on its own circuit and not using an extension cord. If it's an electric dryer, confirm the power cord has been installed properly and the correct voltage is being supplied.
Why is my dryer getting hot?
This means that the dryer is getting too hot. The most common cause is a clogged lint screen or vent system trapping heat in the dryer. Clean the lint screen, vent system, or both to correct the error.
What does a Samsung dryer error code mean?
If your Samsung dryer shows any of the above codes, then it means that the lint screen or the vent system is clogged thus traps heat in your dryer. To troubleshoot the problem you could either clean the lint system or the vent or better yet, you could clean both of them.
Do Samsung dryers have blinking lights?
The traditional Samsung Dryers usually don’t have a digital display, thus the error codes will be presented as blinking lights. For the units with the digital displays below are the error codes that you might be presented with.
Faulty Electronic Lock
If you can’t open your dryer’s door by pushing the knob down, it means the door lock has failed. The door lock mechanism might fail, preventing you from opening it. If this happens, the error code dc will appear on your Samsung dryer’s display.
Control Board Failure
When the machine is running, a DC error code will display on the screen. Sometimes this error happens because of the improper connection to the door lock sensor. The microchip controls the execution of the program, and if the sensor does not deliver a signal to it, then the program gets interrupted, and an error code shows up on the screen.
Door Hinges has Worn Out
When you notice a latch missing or not tracking the groove on the machine case, then your dryer door is worn out.
Damaged Mechanical Lock
When you close the dryer door, there’s no click to indicate that it’s locked. The most common cause is a faulty mechanical lock. A mechanical lock in your dryer is a door closure mechanism that connects with a signal transmitting unit. It’s made up of a latch, spring, and the entire lock and can be replaced easily.
Wiring Harness Issue
If your Samsung dryer dC error code keeps appearing, you will likely need to have the associated wiring checked for wear and tear.
Conclusion
Samsung dryers can display dC errors for a variety of reasons. If you’re experiencing a Samsung Dryer dC error code, be sure to read through the article and try one or more solutions before calling Samsung Customer.
Why is my dryer heater not working?
The problem may be caused by a fault in the gas supply, which limits the supply to the heater coils. Make sure the cut-off valve for the gas supply is fully open.
What is wrong with my dryer door?
The dryer is telling you there is something wrong with the dryer door’s switch or wiring (harness). Check the wiring and the door switch to see if there are loose connections. Otherwise, it’s best to call in a repairman. It may be that either the switch or the harness is damaged and needs replacement.
What is the EEPROM on a dryer?
The thing that commands the dryer is called the EEPROM (Electrically Erasable Programmable Read-Only Memory). It is the communication center of your dryer, located on the dryers PCB (Printed Circuit Board). This is where it all happens: orders are received, commands are given, and actions are executed from this place.
Why does my dryer tell me it's weak?
And when it’s weak, your dryer can tell, because it isn’t getting enough power. It will send you an FE message. 2) It can also be a faulty power frequency sensor in your dryer.
What does et mean on a dryer?
Et means your dryer is suffering from a serious technical error. This ‘Error is too technical’ for the machine to explain and for you to understand. When this happens, try to unplug the dryer and wait for several minutes. Then plug the dryer back.
Can a dryer be closed if it's open?
In case of electricity powered, your repairman will first check if your dryers circuit breaker is closed. If it’s open, no electricity will flow to the heater. But then he’ll have to find out what electrical problem trips the circuit breaker. If it’s faulty or damaged wiring, then he’ll replace that, too.