Slide the latch button outward to release the clasp. Reset the combination on your luggage by pushing and holding the button next to the lock inside the suitcase. Rotate the numbered wheels one at a time to the new combination and release the button. Test the new combination before closing and locking your Samsonite suitcase.
Full Answer
How do you unlock Samsonite luggage?
- To begin, pull up on the dial and spin it clockwise until the lock clicks.
- Check your current number and add five more to it.
- Take note of that number.
- Set the dial to that number and spin it counterclockwise until it clicks once more.
How do you reset Samsonite Winfield luggage lock?
- Press the reset button and hold it while rotating the number dials to the desired combination. …
- Release the reset button after you set the numbers to the new combination.
- Test the combination by turning the dials to the new code to open the lock.
How to set Samsonite lock?
Method 1 Method 1 of 3: Enabling a Combination Lock Download Article
- Set the numbers on the side of the lock to read “000. ” Find the number dials on your combination lock and spin them to 0.
- Rotate the metal lock to the left and press it down. Pull the shackle out of the lock by tugging with an upward motion.
- Rotate the shackle counter-clockwise. ...
- Set your new combination once the shackle is secure. ...
How do I set my luggage lock?
Method 2 of 3: Putting a New Code in a Lock with a Lever
- Find the lever. The lever may be on the inside of the suitcase. ...
- Slide the lever over to the resetting position. To change the combination, the lever needs to be in the position for setting the lock.
- Change the combination. Put your new combination into the lock. ...
- Secure the lock by randomizing the numbers. Push the lever back into the first position. ...
What do I do if my luggage lock is stuck?
0:321:39First thing put our circle empty spaces in one position when all empty spaces are in one position.MoreFirst thing put our circle empty spaces in one position when all empty spaces are in one position. We can start phase two the law.
Can't unlock my Samsonite suitcase?
0:052:05So I'm just going to go something simple zero to zero. And then you'll need to push this button upMoreSo I'm just going to go something simple zero to zero. And then you'll need to push this button up again and that small metal button will release and come up into its original position so.
How do I unlock Samsonite TSA?
0:005:29We have the TSA approved symbol. And then we have where the zippers will go. So this release buttonMoreWe have the TSA approved symbol. And then we have where the zippers will go. So this release button you usually be able to slide it towards the dial so as you can see it has a small arrow over there.
How do you unlock Samsonite luggage forgot code tsa007 lock?
3:014:56You will go ahead and press the reset button which in this case it will be on the side of the lockMoreYou will go ahead and press the reset button which in this case it will be on the side of the lock right next to the dials.
How do you reset a Samsonite 3 digit lock?
0:221:22So to reset it you pull out the shackle. Turn it 180 degrees push it in so it's like this you pushMoreSo to reset it you pull out the shackle. Turn it 180 degrees push it in so it's like this you push it in and turn it another quarter turn now it's in this position.
How do you unlock a combination lock without the code?
0:045:59So you what you want to do is you want to put your pointer finger up here. And you want to applyMoreSo you what you want to do is you want to put your pointer finger up here. And you want to apply some pressure. So you want to pull this up and rotate this master lock.
How do you unlock a 3 digit combination lock?
1:312:53It will automatically open if you're keeping that pressure on so you're starting at zero zero holdMoreIt will automatically open if you're keeping that pressure on so you're starting at zero zero hold the pressure on and go one two three four five six seven eight nine zero.
How do you pick a TSA 007 lock?
3:295:57It's got like three pins like the TSA lock. Click it opens up. Okay let me get my small tensionMoreIt's got like three pins like the TSA lock. Click it opens up. Okay let me get my small tension wrench again put it on in there. All right region pic and I am letting go with the tension as I go up.
What is a combination lock on a suitcase?
Many Samsonite suitcase models are equipped with key or three-digit combination locks for security. Combination locks on luggage give the traveler one less thing to worry about, since there's no need to remember where you left the key or to waste time looking for a lost key. However, if you forget the Samsonite combination to release the locks, you're no better off. Rotating combination locks are relatively simple security mechanisms that can be unscrambled. Once you've cracked the code, it takes only a minute to reset the combination to a three-digit number you can remember.
How long does it take to reset a combination lock?
Rotating combination locks are relatively simple security mechanisms that can be unscrambled. Once you've cracked the code, it takes only a minute to reset the combination to a three-digit number you can remember.
How to test a Samsonite lock?
Test the combination by turning the dials to the new code to open the lock. If the combination does not open the lock, repeat Steps 1 through 4 and test the lock again. If you still can't open the lock, contact Samsonite Customer Service at 800-765-2247.
What is a samsonite bag?
Many Samsonite pieces such as attaches and other bags include a three-digit, built-in combination lock. When purchased, the locks are set on a factory default combination that you can change as often as you wish.
How many dials does a TSA lock have?
If you have a padlock style TSA lock it usually will have 3 dials. The combination code can be changed by opening the lock and turning the shackle 90 degrees then pushing the shackle down. It doesn’t matter if you have a TSA002 lock or a TSA007 lock, sometimes this code changing mechanism gets jammed causing the lock to be stuck in an open position.
Why is the TSA code no longer correct?
What was the correct code is probably no longer the correct code. This is because TSA locks on luggage generally suck. The combination numbers frequently get changed when you don’t intend to change them. The best way to protect your belongings is not luggage locks. That’s a fantasy.
Why won't my lock close?
With these types of lock you’ll find that the lock won’t close. Sometimes, this is because the reset button has become jammed. So check that it is not depressed. If your lock is closed and you can’t open it, it might be that the code you are using is wrong. The lock isn’t jammed it’s locked!
Can you open a suitcase with a ballpoint pen?
The Illusion Of Security. Luggage locks are one of those features that manufacturers put onto suitcases because they help to sell. But in reality, they don’t make your belongings safe. You can open most suitcases using a ballpoint pen. You just need to jam the pen into the zip and it will open.
What to do if the handle is stuck in the open position
There may be a couple of reasons why the telescopic handle may be stuck in the open position. Essentially it may come down to two reasons.
Pins in the telescopic handle are getting stuck
The solution to this is relatively simple but it does involve opening up the suitcase so set aside at least thirty minutes or so.
Telescopic poles are not touching the trigger mechanism
In some cases, the internal trigger mechanism in the handle may move which means that it is no longer touching the telescopic pole.
How to reset a shackle lock?
If the lock is unlocked at the time the combination is forgotten, it's much simpler. Just reset the combination: 1 Set the dial to 000. 2 Turn the shackle at a 90 degree angle from the lock position. 3 Push the shackle down (outside of the lock). 4 Set the desired code. 5 Pull the shackle up. 6 Turn it back to the lock position.
How to find lost combination on TSA?
Some travelers have had luck with the following process for finding a lost combination: Push the button or pull on the lock, to put pressure on the locking mechanism.