Reset Your Nissan Qashqai Service Indicator
- If your ignition is on, turn it off and then back on
- Press the right button next to your speedometer until you reach the settings section
- Once you reach the settings section, keep the button pressed until a new menu appears
- Twist the button to scroll to the “maintenance” category
- Press the button, and scroll down to the “Service” category
How do I reset the Check Engine light on a Nissan?
There are several ways to reset the check engine/service engine light on a Nissan. The best way is to have the code (s) read using a code reader, and to fix the problem. Since so many people just reset the light to try to hide a problem so they can sell a vehicle, I will not go into the details of the other two methods I am aware of.
How do I reset the warning light on my Nissan Navara?
Press the hold TRIP BUTTON. Hold for 5 seconds then release and HOLD again and it display 11000 then HOLD for 5 second and release until it displayed (OIL GOOD) then turn the ignition OFF. 2004-2014 Nissan Navara Service Wrench (Spanner) Warning Indicator Light Reset.
How do I reset the service engine soon light?
A free diagnostic scan can be done to diagnose the problem at most auto parts stores. When you have diagnosed the problem and fixed it, you need to reset the "service engine soon" light. Open the hood and loosen the retaining nut on the negative battery cable clamp using a socket wrench. Slide the cable clamp off of the negative battery terminal.
How do I turn the service light on and off?
Turn the Ignition On. While the Service Light is Displayed. Press and Hold the TRIP BUTTON until the 10000 is flashing. While Flashing Turn Ignition OFF. Done. Turn the Ignition ON.
How do you reset service light after service?
1:072:14RESET service indicator ALL VEHICLES - YouTubeYouTubeStart of suggested clipEnd of suggested clipTo switch the ignition to the on position do not start 3 the display will show a countdown from 10MoreTo switch the ignition to the on position do not start 3 the display will show a countdown from 10 to 0 wait until countdown reaches zero and the service symbol will disappear.
How do you turn the service light off?
With the key out of the ignition find and press the odometer reset button (hold down) Turn the ignition on (warning lights come on) wait about 10-15 sec until most or the lights are off (still pressing odometer reset button) Turn ignition off (button still pressed) and remove the key. Release reset button.
How do you reset the service light on a 2013 Nissan Qashqai?
0:101:03Nissan Qashqai 2013- Service Light Reset / Maintenance Light - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo for step one you want your ignition to be on press the up or down button as you see in theMoreSo for step one you want your ignition to be on press the up or down button as you see in the picture here to select settings. Then press ENTER to confirm.
How do you reset the maintenance light on a 2017 Nissan Altima?
0:011:112017 Nissan Altima Oil Change Service Light Reset - YouTubeYouTubeStart of suggested clipEnd of suggested clipFor the way down here I'm going to reset. And that's it the service intervals were turned off so nowMoreFor the way down here I'm going to reset. And that's it the service intervals were turned off so now they're turned back on.
How do I reset my car service reminder?
1:282:47HOW TO RESET CAR MAINTENANCE LIGHT - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake your foot off the brake. And off the gas. And while you're holding down this here kilometerMoreTake your foot off the brake. And off the gas. And while you're holding down this here kilometer slash miles per hour button what you're gonna do is press your power button twice like yes one two.
How do you reset the service light on a Nissan Qashqai?
0:201:29Nissan qashqai service light reset - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut you want to get two settings press enter go down until you see maintenance press enter then youMoreBut you want to get two settings press enter go down until you see maintenance press enter then you see service press enter press enter again.
How do you reset the service light on a 2014 Nissan Qashqai?
0:001:14nissan qashqai 2014 onwards service light reset - YouTubeYouTubeStart of suggested clipEnd of suggested clipPress up - yes head after and the service will reset the 18,000 641 Matt and Jessica back aid.MorePress up - yes head after and the service will reset the 18,000 641 Matt and Jessica back aid.
How do you reset the service light on a 2012 Nissan Qashqai?
0:000:46Nissan Qashqai 2010 - 2014 service interval reset - YouTubeYouTubeStart of suggested clipEnd of suggested clipSet default confirm it go to maintenance and check it. There you go simple is that.MoreSet default confirm it go to maintenance and check it. There you go simple is that.
How do you reset the service light on a 2014 Nissan Juke?
0:111:07New Nissan Juke service spanner reset - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo all you have to do is press and hold the right on button. Now you keep this pressed till the spunMoreSo all you have to do is press and hold the right on button. Now you keep this pressed till the spun or light starts flashing. All you have to do is release. Turn English it off.
How do you reset the maintenance light on a 2018 Nissan Altima?
2013-2018 Models From the “Maintenance” screen, use the arrow buttons to toggle the selection to “Service“, then press the “Enter” button to enter that screen. From the “Service” screen, use the arrow buttons to toggle the selection to “Reset“. Press “Enter” to reset the engine oil light.
How do you reset the maintenance light on a 2016 Nissan Altima?
0:021:15Nissan Altima 2016 2015 2017 Maintenance Reset - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd to go to reset it you just scroll down to reset. And you press and hold in ur for a while. AndMoreAnd to go to reset it you just scroll down to reset. And you press and hold in ur for a while. And that should reset the tire is the same way.
How do you reset the maintenance light on a 2015 Nissan Altima?
For 2013-2018 Nissan AltimaTurn on the ignition. If your car has a Smart key button, press the START button twice without step on the brake pedal.Go to the ⚙️ SETTINGS menu. ... Find the MAINTENANCE. ... Press ENTER. ... Select SERVICE or ENGINE OIL. ... On this menu, you can choose RESET or set the distance for service type items.
How do I turn off the change engine oil soon?
Maintenance - Oil Change Indicator ResetSwitch the ignition on. ... Fully press the accelerator and brake pedals at the same time.Keep the accelerator and brake pedals fully pressed.After three seconds, a message displays confirming the reset procedure is in progress.More items...
Why does my car say change oil when I just changed it?
The sensor was not reset Finally, there is one last reason as to why your vehicle might be saying to change the oil. The oil sensor might not have been reset after the oil change was performed. You can call your trusted mechanic about this, or you can consult your owner's manual on how to reset the oil sensor.
What is a service indicator light?
Service indicator lights exist to let the driver know when the vehicle needs general maintenance. The service indicator lights can inform the driver when the oil needs to be changed, when basic components such as air filters and exhaust systems need to be inspected, and when parts such as the brakes should be replaced.
Why won't my change oil light go off?
If your oil light stays on even after changing your engine oil, you're going to want to check the sensor first to rule out a malfunctioning sensor as the cause. Dirt and other particles can make their way into the oil pump, causing the sensor to falsely identify oil issues.
How to reset wrench light on Nissan Juke?
Follow the instructions below to reset the wrench light on your Nissan Juke: Turn the ignition key to “ON” position without starting the engine. If your car has a Smart key button, press the “Start” button twice without touching the brake pedal.
What does the wrench symbol mean on a Nissan Juke?
If your vehicle has maintenance items due, a wrench symbol and the distance to oil change information will appear on the display. The engine oil change interval must be reset after performed the maintenance service or change the engine oil on your vehicle. Follow the instructions below to reset the wrench light on your Nissan Juke:
When did Nissan Qazana come out?
He made his debut at the Geneva International Exhibition in March of 2010 and is also intended for the North American market. On February 11, 2009, Nissan announced the start of production at NMUK Washington, UK, in 2010 after it appeared as a concept car at the 2009 Geneva Auto Show as the Nissan Qazana.
STEP 2
Press the hold TRIP BUTTON. Hold for 5 seconds then release and HOLD again and it display 11000 then HOLD for 5 second and release until it displayed (OIL GOOD) then turn the ignition OFF.
STEP 2
While the Service Light is Displayed. Press and Hold the TRIP BUTTON until the 10000 is flashing. While Flashing Turn Ignition OFF.
STEP 2
Then Press and HOLD the TRIP BUTTON until it displayed ( ——-km ) then release.
STEP 2
Press the PAGE button on the DIC located at the left side of the steering wheel. to Navigate SETTINGS then press ENTER.
Pulling The Codes With a Code Scanner
Plug the code scanner's plug in the on board diagnostics port under the dash, to the left of the steering column. Turn the key to the "On" position, without starting the car.
Pulling The Codes Without a Scanner
Turn the ignition key to the "On" position, without starting the engine. Wait three seconds. Depress and release the gas pedal five times in five seconds, then let the pedal up. Count seven seconds and then depress the gas pedal and hold it down for 10 seconds.
How to change the tail light on Nissan Altima 1998-2001
DIY, change the tail light assembly on your Nissan Altima, the model manufactured in the years 1998, 1999, 2000 and 2001. This is a simple replacement process, that will require only an 8 mm socket wrench with a ratchet and extension and about 15 minutes of your time. The whole process takes places …
How to change the master window switch on Nissan Altima 2000
DIY, change the master window switch on your Nissan Altima, the model produced in the year 2000. This is a simple replacement that can be done in less than 15 minutes, using flat blade and Phillips screwdrivers. After you open the front door, on the driver’s side, you can go to the master …
DIY, remove the front door panel on Nissan Altima 1998-2001
Do it yourself, remove the front door panel on your Nissan Altima, the model produced in the years 1998, 1999, 2000 and 2001. You will require a flat blade screwdriver and a Phillips screwdriver. The removal process is quite simple and you should be able to do it in less than 20 minutes. …
How to change the window switch on Nissan Maxima 2004-2008
DIY, change the driver’s master window switch on your Nissan Maxima, the model produced between the years 2004 and 2008. Sometimes these switches get wet and shorted out and they need to be replaced. You can do it using a flat blade screwdriver and a Phillips screwdriver. The procedure won’t take you more than 20 …
DIY, remove the front door panel on Nissan Maxima 2004-2008
Do it yourself, remove the front door panel on your Nissan Maxima. The removal process is similar on models produced between the years 2004 and 2008. You will need a flat blade screwdriver and a 10 mm socket, with a ratchet and extension. The removal of the door panel alone will probably take you more …
How to change the tail light on Nissan Maxima 2004-2008
DIY, change the tail light assembly on your Nissan Maxima, the model made between the years 2004 and 2008. This repair requires a Phillips screwdriver, a flat blade screwdriver and an 8 mm socket wrench, with a ratchet. The whole process will probably take you about half an hour. Start in the trunk of …
How to replace the window switch on Nissan Murano 2003-2007
DIY, change the master window switch on your Nissan Murano, the model from the years 2003, 2004, 2005, 2006 and 2007. For this replacement you will require a Phillips screwdriver or a 10 mm socket wrench. This is a simple replacement that will probably take you less than 15 minutes. In the beginning, after you …