Tool needed to Repair Nylon Fuel Line
- Keep all sources of ignition away from the area to prevent accidental fire.
- Never, under any circumstances, use an electric tool of any kind (as recommended in some forums) when working on a fuel...
- Find a wood screw large enough to thread into the nylon fuel line when removed.
- Place a drain pan under the area.
Full Answer
What is a nylon fuel line repair kit?
Dorman's Nylon Fuel Line Repair Kit includes all the professional, quality-made tools and parts you need to get fuel line repairs done quickly and efficiently. Kit features professional- quality tool with ergonomic clamp-type grip Innovative clamp-block design makes joining nylon to nylon barbed fittings easy
How to repair nylon line on a car?
Mostly all auto parts stores sell a repair kit capable of repairing any size nylon line. It consists of two opposing blocks with multiple size holes for any size line, a gun to hold the blocks, and a nylon-tubing cutter.
How do you fix a broken fuel line on a car?
Remove the broken fuel line using the tubing cutter. Make the cut as far back as necessary so there are at least 3 inches of straight line to install the compression fitting. Purchase the necessary length of fuel line and one compression fitting if replacing the line to the fuel filter. Purchase two compression fittings for a fuel line section.
Do all new cars have nylon fuel lines?
Pretty ingenious method I found tonight while doing some research on Nylon fuel lines. All new cars have this type of fuel line and fittings I've been told. Saves you the $100 on the Dorman Nylon compression tool.
Can you repair a nylon fuel line?
Nylon lines tend to break near the fuel filter due to the twisting and force necessary to remove it. Regardless of the placement of the break, a nylon repair tool is necessary to repair the line. Mostly all auto parts stores sell a repair kit capable of repairing any size nylon line.
How do you repair a plastic fuel pipe?
1:5914:50Gasoline Leak? Easy DIY Nylon Fuel Line Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipAlso by Dorman these nylon fuel line press fittings these are for 3/8 fuel line and it's simply aMoreAlso by Dorman these nylon fuel line press fittings these are for 3/8 fuel line and it's simply a matter these unions are just simply a matter of pressing. The two pieces together one into each end so
How do you fix a cracked fuel line?
0:2110:40How To Fix Leaking Fuel Lines | ALL Makes And Models - YouTubeYouTubeStart of suggested clipEnd of suggested clipWe have four compression fittings we have a tubing cutter. We have a pick or you can use aMoreWe have four compression fittings we have a tubing cutter. We have a pick or you can use a screwdriver whatever the case we're gonna be using a little hacksaw for metal.
Can JB Weld be used on a fuel line?
When fully cured, J-B Weld is completely resistant to water, gasoline, and about every other petroleum product or automotive chemical.
Is epoxy resistant to gasoline?
Loctite Epoxy Weld does not shrink and is resistant to most shop fluids such as water, diesel fuel, gasoline, antifreeze, hydraulic fluid, motor oil and transmission fluids.
How do you seal a leaking fuel line?
2:5514:16Fuel Line Leak Quick Cheap Fix - YouTubeYouTubeStart of suggested clipEnd of suggested clipWork the way I fixed these things before. I get some pieces of braided fuel line rubber stuff nowMoreWork the way I fixed these things before. I get some pieces of braided fuel line rubber stuff now this is rated for gasoline so it's right on a fuel injection hose. And you can't run excessively long
Dorman OE Solutions Fuel Line Repair Kit
When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.
Dorman OE Solutions Fuel Line
When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.
Dorman OE Solutions Fuel Line Unions
When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.
Dorman OE Solutions Fuel Line
When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.
Dorman OE Solutions Fuel Line Unions
When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.
Dorman OE Solutions Fuel Line Repair Kit
When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.
Dorman OE Solutions Fuel Connector
When autocomplete results are available use up and down arrows to review and enter to select. Touch device users, explore by touch or with swipe gestures.
How to fix a broken fuel line?
Repair Procedure. Place a drip pan under the area to catch any fuel that drips from the line once cut. To prevent constant dripping, use a small piece of rubber tubing with a block off the screw. Remove the broken fuel line using the tubing cutter.
How to install a fuel line ring?
Install the ferrule (ring) over the line in front of the cap. Push the original fuel line with the ferrule and cap into the center section of the connector. Hold the connector and push the line until completely seated into the center section. Thread the cap onto the center section of the connector.
Why does nylon line break?
Nylon lines tend to break near the fuel filter due to the twisting and force necessary to remove it. Regardless of the placement of the break, a nylon repair tool is necessary to repair the line.
What is the pressure of fuel injection?
Fuel injected vehicles use fuel line pressures in the neighborhood of 45 to 60-PSI, whereas early model carbureted vehicles use only 4 to 8-PSI. On top of that, today’s vehicles have a larger number of lines, a variety of different fittings, flexlines. Many are also now using nylon lines as opposed to steel.
Can you use an electric tool on a fuel line?
Never, under any circumstances, use an electric tool of any kind (as recommended in some forums) when working on a fuel line. If one drop of fuel or vapor contacts the arc from the electric motor, you will definitely be an unhappy camper for the last time.
What is fuel line?
Fuel line is a petroleum-resistant nitrile tube with a covering that resists weathering, ozone and heat and can be used for ethanol-laced fuels and diesel fuel. It should, however, not be used on coolant systems, oil systems or fuel-injection systems that produce pressures higher than 50 psi.
What is the hose from fuel cell to filter?
The main line from fuel pumps to regulators (under hood) is a single neoprene 1/2 id hose. I do not see any deterioration, other than some contaminants in filter and carburetor float bowls.
What type of hose is used for a small engine?
Marine hose is rated for 40 psi and will work in a pinch for carbureted passenger cars and light trucks. Tygon fuel hose. Small engines on your lawnmower, ATV or motorcycle use a gas-resistant vinyl tubing called Tygon.
What causes water contamination in fuel cells?
What causes water contamination in a fuel cell is the condensation that does and can form in the empty portion of the tank itself and it occurs no matter what fuel you use. With gasoline, the water instantly separates and creates a layer of water, with ethanol blends, it will absorb up to a certain amount.
Can you clamp a worm gear with a neoprene hose?
Neoprene with an outer steel braiding is also offered for custom applications; however, it is difficult to clamp with a standard worm gear clamp. Special AN-type fittings are often necessary with steel-braided fuel line. When a bent filler neck hose is necessary, wire-inserted fuel hose is also offered.
Is methanol hose ozone resistant?
It is approved for all fuel blends including straight methanol, and the outer coating is also ozone- and abrasion-resistant. High-pressure fuel-injection hose can also be used in low-pressure applications, but the difference in pricing may convince you to save it for where it is needed. Nylon fuel line.
Can additives be used to prevent deterioration of fuel line?
Therefore, even the most liberal use of additives will not prevent the deterioration of fuel line not formulated to withstand it. Caution and vigilance is required, including keeping abreast of the ever-changing state of modern pump gas and it's compatibility with whatever fuel line you employ. Reply.