Receiving Helpdesk

ready mix concrete prices

by Dr. Mario Marquardt Jr. Published 3 years ago Updated 2 years ago

Having ready-mix concrete delivered to your home typically costs an average of $117 per cubic yard or between $104 to $144 per cubic yard.Jun 8, 2022

How much does it cost to pour a 24x24 slab of concrete?

A typical 24x24 garage slab costs between $3,057 and $5,944 with prices ranging from $5.31 to $8.31 per square foot for a 4” reinforced slab of concrete, and $6.83 to $10.32 per square foot for a 6” slab of reinforced concrete.

Is it cheaper to mix your own concrete?

One of the least expensive ways to get concrete is to mix your own. You can buy bags of the mix from a home improvement store. Typically, you only have to add water for it to be ready to pour. However, it is important to get the ratio right and to mix the concrete thoroughly.

How much does it cost to pour a 20x30 concrete slab?

The average cost of a 20×30 concrete slab is between $2,400 and $4,800. The median price is about $3,600. However, the thickness of the slab and other features may increase or lower the cost.

What is the price of a meter of concrete?

$60 to $85 per square metre for normal class concrete. $65 to $90 per square metre for reinforced concrete. $100 to $150 per square metre for an exposed aggregate finish.

Can you pour concrete directly on dirt?

Long story short, yes you can pour concrete over dirt.

How much does it cost to pour a 20x20 concrete slab?

You can expect to pay between $1,600 and $3,200 for a 20×20 slab. The estimates are based on the average cost of $4 to $8 per square foot for a concrete slab. Yet, the costs may vary. Here is a closer look at the average cost of pouring a concrete slab for a barndominium.

How much does it cost to pour a 24x30 slab of concrete?

A 24×30-foot slab covers 720 square feet. With an average price of $6 per square foot, you may pay about $4,320 for a slab foundation. However, the price can range from $4 to $8 per square foot, resulting in a total cost between $2,880 and $5,760.

How many yards of concrete do I need for a 24x24 slab?

7.11 yardsFor example, for a concrete slab that is 24' X 24' X 4”, simply enter 4 in the Thickness/Depth field, 24 in the Width field, and 24 in the Length field. Click “Calculate”. Your answer should be 7.11 yards. Note: The Concrete Volume Calculator can also be used to determine yardage for aggregate products.

How thick should a concrete slab be?

Standard concrete floor slab thickness in residential construction is 4 inches. Five to six inches is recommended if the concrete will receive occasional heavy loads, such as motor homes or garbage trucks. To prepare the base, cut the ground level to the proper depth to allow for the slab thickness.

How much does it cost for 1 cubic meter of concrete?

The Labour cost for concrete work is around 70 to 75 Rs per cft (cubic foot) or 2500 to 2650 Rs per cubic meter (m3). The Labour Cost for PCC concrete is around 30 to 35 Rs per sq ft (square foot) or 320 to 400 Rs per cubic meter (m3).

How do you quote a concrete job?

Local ready-mix concrete suppliers can give you quotes once you define the project specifications and provide the job location. Concrete pricing is typically quoted per cubic yard or cubic meter (metre). For an average estimating number, you can use $77 per cubic yard.

How many 20kg bags of cement makes a cubic metre of concrete?

There are 110 bags of 20kg of concrete in a cubic metre. 1 cubic metre of concrete weighs 2200kg, so, number of bags of 20kg of concrete in a cubic metre = 2200 ÷ 20 = 110 bags. So, approximately there are 110 bags of 20kg of concrete in a cubic metre.

How much is ready mix concrete?

Ready-mix concrete is pre-mixed in batches of 10 cubic yards or more and includes delivery up to 20 miles for $119 to $147 per cubic yard. The quality of ready-mix concrete is much higher than short load delivery because the concrete is precisely prepared at a mixing plant.

How much does concrete cost?

The average cost of concrete is $119 to $147 per cubic yard, which includes delivery up to 20 miles. Pouring plain concrete costs $5 to $10 per square foot depending on the quality, while colored, stamped, or stained concrete costs $8 to $18 per square foot to install.

How much does a truckload of concrete cost?

One full truckload of concrete is about 10 cubic yards and costs between $1,169 and $1,444 depending on the PSI mix. Anything less than a full truckload is considered a short load which adds $53 per cubic yard to your final price.

How long does it take for a cement truck to deliver concrete?

When you order concrete, cement trucks don't drive from house to house making deliveries. If pre-mixed, each order of concrete is mixed specifically according to the requirements of the job. Once the concrete is mixed, the driver has about 90 minutes, or 300 rotations of the truck's barrel, to deliver that load before the cement starts to set.

How much concrete can a boom truck move?

Trailer mounted pumps can move 15 cubic yards of concrete per hour, while a boom truck can run 70 to 90 cubic yards per hour. When pumping with a boom truck, add in at least 1 hour for equipment setup and 1 hour for cleanup.

How much does it cost to install concrete edge forms?

Plywood forming with stakes, nails, and form oil is required to pour concrete. Concrete edge forms for driveways and sidewalks cost $2 to $3 per linear foot to install, while forms for foundation walls, building walls, and retaining walls cost $2.50 to $6.00 per square foot of contact area.

How much does it cost to install a 6" concrete slab?

A typical 6" thick concrete slab costs $5 to $10 per square foot depending on the concrete quality and project size. Decorative options such as coloring, stamping, patterns, or special finishes bring the total installation cost to $8 to $18 per square foot. However, most concrete jobs are measured in cubic yards instead of square feet.

Ready Mix Concrete Prices in London

Here is a price list with average prices for EasyMix Concrete UK ready mix concrete per m 3.

Concrete Calculator

Please use this calculator to estimate the quantity of concrete required for your project.

What are the factors that determine the price of concrete?

Some of these factors include the following: grading, subbase preparation, concrete forms and finishing, reinforcement, and the local cost of concrete.

What materials are used for concrete?

The typical materials used are concrete mix, forming supplies, texturing and coloring products, sealers, etc. Labor will vary depending on your project - its size, whether you have new or existing concrete, how detailed the decorative work will be and more.

What is more expensive, concrete or stone?

Outdoors, asphalt, plain concrete and gravel are more affordable, while natural stone and pavers are more expensive. Indoors, laminates and ceramic tiles will cost less, while granite, marble and hardwood will cost more. Decorative concrete is great if you can afford to spend some extra money but don’t want to break the bank.

What is decorative concrete?

Decorative concrete is a good option for homeowners that want a high-end look without the high-end price tag. Concrete is a versatile material that can be used for floors, countertops, patios, driveways and more. Techniques such as stamping, staining and polishing, can transform concrete to look like flagstone, marble or other expensive materials at a fraction of the cost.

What is needed to repair cracks in concrete?

Reinforcement is required because all concrete cracks, so if you want your cracks to remain small, you'll need reinforcement. Wire mesh, re-bar, plastic mesh, and fiber in the mix are all commonly used materials.

What factors affect the cost of concrete?

Factors that influence the cost of decorative concrete: 1 The number of colors used 2 The number of stamping textures used 3 The detail of the design (i.e. complicated patterns are expensive) 4 Special details such as embeds (common in countertops) 5 Specialty form or mold work (i.e. curves and unique shapes cost more) 6 Level of polishing

Trustworth Infracore Private Limited

The price of Ready Mixed Concrete products is between ₹4,200 - ₹4,301 per Cubic Meter during Feb '21 - Jan '22.

ADT Industries

Grade Standard: IS 383 Cement confirms to IS 12269, Water confirms to IS 456 2007, Admixtures confirms to IS

B & B Associates

Material: Portland cement, water and aggregates comprising sand and gravel or crushed stone

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9