Concrete Cost Calculator estimates the cost of concrete per square foot. Calculate how much concrete you need per yard, or to pour a slab of concrete. Ready - mix concrete costs $98-99 per cubic yard. The average cost of a concrete slab (6 inches thick) is $5.00-5.50 per square foot, including materials and labor.
Full Answer
How to calculate ready mix concrete?
To use the calculator:
- Choose units of measure: English or Metric.
- Enter the width, length, and thickness of the project.
- Select whether you are measuring thickness in feet or inches.
- Click Calculate.
How much does ready mix cost per yard?
When ordering ready-mix concrete, most companies have a "small load charge" if the total yardage is under 6 - 8 yards. All companies have their own policy on this. EXAMPLE: Some will charge $50 dollars per yard for every yard under the minimum yardage.
What is ready mix?
Ready-mix concrete is a combination of cement, water and aggregates – such as sand, gravel or crushed stone – that is delivered to a construction site ready-to-pour, reducing labour and costs for the construction company.
How to properly mix concrete (DIY)?
Tools Required
- Bucket
- Dust mask
- Hoe
- Rubber gloves
- Safety glasses
- Stiff bristle brush
- Wheelbarrow
How do you calculate the cost of concrete?
Use $90 per cubic yard as a ballpark figure for concrete prices, but concrete slab cost will vary by region. Also, expect a fee of about $60 per load for delivery from a concrete truck for concrete cost. There could be other fees for such things as Saturday concrete truck delivery and small loads.
How do you calculate labor cost for concrete?
The cost of labor to pour concrete is $45 per hour. There can also be a delivery fee of $60. To have concrete poured and finished, it will cost $2.52 to $2.60 per square foot for the labor, and $2.83 to $3.57 per square foot for the concrete itself. Concrete slabs are poured either off or on the job site.
How do you calculate ready mix concrete?
Most concrete purchases will be made in cubic yards, which equates to 27 cubic feet. For example, a project measuring 10 ft in length by 10 ft in width with a depth of 3.5 in will be just over 1 cubic yard. The equivalent to a single cubic yard in metric measurements would be roughly 0.76 cubic meters.
Is it cheaper to mix your own concrete?
One of the least expensive ways to get concrete is to mix your own. You can buy bags of the mix from a home improvement store. Typically, you only have to add water for it to be ready to pour. However, it is important to get the ratio right and to mix the concrete thoroughly.
How much does it cost to pour a 20x30 slab?
The average cost of a 20×30 concrete slab is between $2,400 and $4,800. The median price is about $3,600. However, the thickness of the slab and other features may increase or lower the cost.
How much does it cost to pour a 20x20 concrete slab?
You can expect to pay between $1,600 and $3,200 for a 20×20 slab. The estimates are based on the average cost of $4 to $8 per square foot for a concrete slab. Yet, the costs may vary. Here is a closer look at the average cost of pouring a concrete slab for a barndominium.
How many 20kg bags of ready mix concrete do I need?
How many bags of concrete per m2. Generally, there are 11 bags of 20kg premixed concrete per m2. 1 square metre of concrete at 100mm deep weighs 220kg, so, number of bags of 20kg of concrete per m2 = 220 ÷ 20 = 11 bags. Thus, you will need 11 bags of 20kg concrete per square meter.
How much is a bag of ready mix concrete?
One 80lbs bag of Quikrete Concrete Mix will yield approximately . 60 cu ft. So it will take 45 bag to equal one cubic yard of concrete. If you have a project over a 1/2 a cubic yard you should consider our Mix On-site Concrete especially if you are hand mixing.
How much Builders mix do I need for 1m3 of concrete?
5 BagsBags of Cement to Builders mix: M15 = 4 Bags : 1m3 Builders mix. M20= 5 Bags : 1m3 Builders mix.
How much does it cost to pour a 10x12 concrete slab?
Cost of concrete per square footSlab SizeSquare FeetAverage Cost10x10100$60010x12120$72010x20200$1,20012x12144$86418 more rows•Jun 12, 2022
Can you pour concrete directly on dirt?
Long story short, yes you can pour concrete over dirt.
Is bagged concrete cheaper than concrete?
Cost: Don't think that mixing concrete from bags is cheaper than getting a delivery. It takes 45 bags of 80-pound Quikrete to mix one yard of concrete. For your 2 yard project, that means you will need 90 bags at 80 pounds apiece.
What is CEMEX ready mix concrete?
CEMEX specializes in ready mix concrete formulated to your exact specifications and delivered to your job site. Larger jobs can be completed much more easily and efficiently when you order ready mix concrete by the yard. Ready mix concrete is ideal for large patios, driveway renovation, pool decks, home foundation slabs, parking lots, and new sidewalk construction. If you’re just doing some DIY maintenance around your home property, a yard of concrete is going to be far more than you’re able to use. In these cases, it makes more sense to purchase bagged products and mix them yourself. Examples of smaller projects include minor repairs (curbs, sidewalks, stairs, etc.), ramps, small patios, and setting fence posts.
How many cubic feet is a concrete yard?
Most concrete purchases will be made in cubic yards, which equates to 27 cubic feet. For example, a project measuring 10 ft in length by 10 ft in width with a depth of 3.5 in will be just over 1 cubic yard. The equivalent to a single cubic yard in metric measurements would be roughly 0.76 cubic meters.
How many square feet does a cubic yard of concrete cover?
Concrete volume is measured in cubic yards. When poured on a perfectly level surface, one cubic yard will cover 27 square feet at one foot thick.
Is there a perfect pour in a project?
There’s rarely a perfect pour in any project, so you may consider adding a little extra contingency to your order to account just to be on the safe side. The amount you decide to order will depend on the size and complexity of your site and project. It’s also important to know how this will affect your overall budget.
How much does it cost to mix concrete?
The concrete is then mixed on-site using a freestanding mixer by the company staff for a service charge of about $60 to $110 or more. At that point, you or your contractors are responsible for pouring the concrete.
How much does concrete cost?
The average cost of concrete is $119 to $147 per cubic yard, which includes delivery up to 20 miles. Pouring plain concrete costs $5 to $10 per square foot depending on the quality, while colored, stamped, or stained concrete costs $8 to $18 per square foot to install.
How much does a truckload of concrete cost?
One full truckload of concrete is about 10 cubic yards and costs between $1,169 and $1,444 depending on the PSI mix. Anything less than a full truckload is considered a short load which adds $53 per cubic yard to your final price.
How much does a subbase cost?
For proper installation, a sub-base or sub-grade of gravel and sand that's delivered needs to be laid and compacted at $10 to $20 per cubic yard. A subbase reduces the possibility of shifting, resulting in less cracking. The foundation must be stable for the concrete to perform best.
How long does it take for a cement truck to deliver concrete?
When you order concrete, cement trucks don't drive from house to house making deliveries. If pre-mixed, each order of concrete is mixed specifically according to the requirements of the job. Once the concrete is mixed, the driver has about 90 minutes, or 300 rotations of the truck's barrel, to deliver that load before the cement starts to set.
How much does it cost to install a 6" concrete slab?
A typical 6" thick concrete slab costs $5 to $10 per square foot depending on the concrete quality and project size. Decorative options such as coloring, stamping, patterns, or special finishes bring the total installation cost to $8 to $18 per square foot. However, most concrete jobs are measured in cubic yards instead of square feet.
What is a short load concrete truck?
Short Load Concrete – Commonly used by residential contractors for small to medium-sized projects where the concrete is mixed on-site. The dry concrete usually fits in one truckload.
How much does it cost to have concrete poured?
Expect to pay between $4.25 and $6.25 per square foot to have a plain concrete slab poured. To get an even better idea of how much your project will cost, get quotes from local contractors that can come see the site.
How much does concrete cost?
For plain concrete, you can expect your price to fall somewhere between $4.25 and $6.25 square foot depending on the project size and complexity.
What are the materials used in decorative concrete?
The typical materials used are concrete mix, forming supplies, texturing and coloring products, sealers, etc. Labor will vary depending on your project - its size, whether you have new or existing concrete, how detailed the decorative work will be and more. Get bids from multiple contractors to make sure you are getting a fair deal.
What are the factors that determine the price of concrete?
Some of these factors include the following: grading, subbase preparation, concrete forms and finishing, reinforcement, and the local cost of concrete.
What factors affect the cost of concrete?
Factors that influence the cost of decorative concrete: 1 The number of colors used 2 The number of stamping textures used 3 The detail of the design (i.e. complicated patterns are expensive) 4 Special details such as embeds (common in countertops) 5 Specialty form or mold work (i.e. curves and unique shapes cost more) 6 Level of polishing
What makes up the majority of the cost of a concrete project?
Concrete makes up the majority of the cost of a concrete project. Prices vary by region, to get a more accurate estimate contact your local Ready-Mix supplier.
What is concrete used for?
Concrete is a versatile material that can be used for floors, countertops, patios, driveways and more. Techniques such as stamping, staining and polishing, can transform concrete to look like flagstone, marble or other expensive materials at a fraction of the cost.