What does it mean when it says service electronic throttle control?
solution: this indicates a serious failure of your throttle control system. the engine computer is programmed to go into limp mode when the system malfunctions, in an attempt to limit your speed and prevent damage to the engine. it can be caused by a sensor failure, or even by outside electromagnetic interference.
How do I reset my electronic throttle control system?
Resetting your electronic throttle control manually can be a tricky job. First, make sure the accelerator pedal is fully released. Next, turn the ignition on and then turn it off and wait for ten seconds. During these ten seconds, be sure the throttle valve is moving by listening for a sound of operation.
Can I drive with service electronic throttle control?
It is not safe to drive with an electronic throttle control light. While you might be lucky and only have a drop in fuel efficiency or a slight drop in acceleration, the problem can quickly get worse if the sensor readings continue to go awry.
How much does it cost to service electronic throttle control?
To fix an electronic throttle control costs between $580-$700, including jeep electronic throttle control repair cost. A mechanic's labor costs between $100-$125, minus taxes and fees, and repairs in other parts may also be required.
What does red lightning bolt mean on Dodge Ram?
The lightning bolt on the dash means that there is a problem with the electronic throttle control system in your vehicle. Get a code reader and scan the engine for any logged codes. The light may be on for a glitch and the electronic throttle control system needs to be reset.
Where is the electronic throttle control located on a Dodge Ram?
You will first open the engine hood and locate the throttle control part. You will find it on top of the car engine, where it connects the air filter.
What causes the ETC light to come on?
ETCs control an internal combustion engine's power by regulating how much fuel and air are let into the engine. When this system is disrupted, a vehicle's electronic throttle control light will start to flash, indicating a problem with the engine's fuel and air intake.
What controls the throttle on a 6.7 Cummins?
The throttle control valve is located between the intake manifold and intercooler pipe on the drivers side of the engine and features a butterfly valve that has been known to get contaminated with soot and freeze up.
What causes throttle control failure?
Possible causes of a malfunction One of the main causes of a malfunctioning throttle body is internal contamination. Due to the contamination accumulated in the throttle body, the throttle valve can no longer move properly, causing problems with the control of the air supply.
How many hours does it take to replace a throttle body?
How long does a throttle body replacement take? The job usually takes around an hour for either a replacement or a cleaning.
What are the symptoms of a dirty throttle body?
When the throttle body gets dirty, it has a direct effect on how smoothly the engine operates. Signs indicating a problem include rough idling, jumpy or sluggish acceleration, poor fuel economy, and stalling. With the use of a throttle body cleaning product, the dirt and debris buildup are easily removed.
Where is the electronic throttle control sensor located?
A throttle position sensor (TPS) is a sensor used to monitor the air intake of an engine. The sensor is usually located on the butterfly spindle/shaft, so that it can directly monitor the position of the throttle. More advanced forms of the sensor are also used.