Pre-Bent Fuel Lines
| Part # | Application | Reqd | Price | |
| 2WD OE Material Fuel Lines | ||||
| 1 | 43-5321 | Material: Steel | Fuel Line-Pump/Carb 6cyl | F100 61-64 |
| 1 | 43-5322 | Material: Steel | Fuel Line-Pump/Carb 460 | F100 2bbl 71-72 |
| 2 | 43-5304 | Material: Steel | Fuel Line-Front/Rear 6 Cylinder | F100 57-60 |
Full Answer
Are your fuel lines pre-bent and ready to install?
All of our fuel lines are pre-bent and ready to install, so that your installation process becomes that much easier, and that much less time consuming.
Why buy fuel and brake lines from lines-to-go?
When you purchase products from us, you’ll be able to stop spending countless hours trying to make a repair that seems endless, and start relying on the pre-bent fuel and brake lines from the professionals here at Lines-To-Go. In a hurry? Don’t worry, we know that time is valuable, and you need your vehicle to run flawlessly.
Do the fuel hoses come with the fuel lines?
You have no items in your shopping cart. Fuel hoses are not included with fuel lines and must be purchased separately. Fuel hoses are two feet long and come with four clamps. They must be sized and cut to fit.
Do you offer same-day shipping for fuel or brake lines?
We don’t make you wait for your fuel or brake lines! We offer same-day shipping in order to better serve you, so that the next time you need a fuel hose, you know exactly where to go for immediate relief. Check out the great fuel lines we have available to ship to you today, include Chevy truck fuel lines, GMC fuel lines and more!
How do you fix a bent fuel line?
0:141:51How To Straighten Bent or Coiled Brake & Fuel Lines - YouTubeYouTubeStart of suggested clipEnd of suggested clipHere it is the Eastwood handheld tubing straightener and I'm going to show you how easy it is to useMoreHere it is the Eastwood handheld tubing straightener and I'm going to show you how easy it is to use just bend. The end of the tubing slightly by hand then feed and roll it through the straightener.
What is the best material for fuel lines?
The best fuel line material depends on your needs. However, the best material for fuel lines is polytetrafluoroethylene or PTFE. PTFE fuel line is made of plastic material specifically known as Teflon. This fuel line material is impervious is resistant to the degenerative fuel effects which could form vapor barriers.
How do you prevent fuel lines from kinking?
I've used wire protector crap and tie wrapped it to the fuel line. This makes the fuel line more rigid and helps prevent it from kinking. I make sure they are long enough to coil under the tank and then double check through the bottom access hole.
Are braided fuel lines better?
Braided hose provides better heat dissipation and better flow, which is important when choosing performance car parts. Additionally, braided lines are able to withstand more pressure than rubber lines.
Are braided fuel lines safe?
Modern fuels have additives that harden and deteriorate traditional rubber hose including stainless steel-braided hose. This leads to potentially dangerous leaks and weeping.
What is the best type of fuel line?
The best solution is a material called PTFE. That stands for polytetrafluoroethylene—a plastic material that is best known as Teflon in one specific variation. This material is impervious to the degenerative effects of fuel that also creates a vapor barrier so fuel vapors cannot leak past.
How do you straighten a steel fuel line?
0:402:30THE EASIEST WAY to Straighten Brake and Fuel Tubing! Eastwood ...YouTubeStart of suggested clipEnd of suggested clipSo a quick way that you can do it. And really the best way to do it is using these handheldMoreSo a quick way that you can do it. And really the best way to do it is using these handheld straighteners.
How do you shape a fuel pipe?
3:317:46How to Bend Your Brake or Fuel Lines | Hagerty DIY - YouTubeYouTubeStart of suggested clipEnd of suggested clipRight at 90 degrees. And it's always better to go a little bit short on your angle than too far.MoreRight at 90 degrees. And it's always better to go a little bit short on your angle than too far. Because you'll always be able to put it back in the bender. And bring it just a little bit past.
How do you bend a rubber fuel line?
Use a little water/soap to make it slip on easier. Bend it to the shape you want then place in oven at 325 degrees for 10 minutes. Take it out and let it cool slowly.
What is the best metal for fuel line?
Most cars come from the factory with Metal Lines because they hold up better than any soft material. They are usually made from stainless, aluminum or coated steel tube. Metal is the best material for fuel lines. However, it can be difficult to fabricate.
Can I run all rubber fuel lines?
Standard rubber vacuum or heater hose should never be used in fuel applications. The hose will deteriorate from the inside out and can plug fuel filters and carburetors with rubber debris, long before it springs an external leak.
Can you use fuel injection hose for fuel line?
0:063:04Fuel Line and Fuel Injection Hoses | ACDelco - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd fuel line hoses and why the correct replacement hoses are vital for use with today's gasolineMoreAnd fuel line hoses and why the correct replacement hoses are vital for use with today's gasoline and diesel fuel blends. It's simple modern fuel hoses are necessary with modern fuels.
Get Sectioned & Pre-Bent Brake Lines at LinesToGo
Anytime you’re driving a car, there is a risk that the brakes may fail and you end up having an accident. Car crashing due to brake fails or other damages is a fear that keeps some people from getting on the road.
Sectioned and Pre-Bent Brake Lines
Are you looking for brake line replacements for your car? If so, you must first find the best provider that will cost you less while still providing high-quality services. Secondly, after finding a suitable service provider, you must decide whether you want to install pre-bent brake lines or normal lines.
Get High-Quality Brake Lines in the USA
To receive the best pre-bent brake lines, order from LinesToGo, a USA-based company. Our team provides you with hoses made from the finest materials to keep your vehicle running at its best for as long as possible. Moreover, at LinesToGo, you will receive quick and reliable service and quality results.
Learn More About Us
To receive any guidance or inquire about our services and rates, you can reach out to our team of professionals who will be happy to advise you. You can either call us at our contact number or drop a message on the live chat application, and one of our agents will get in touch with you within a short time.