| Width / Length | Nominal thickness* | Nominal thickness* | Nominal thickness* |
| in | mm | in | mm |
| 24 x 48 | 610 x 1219 | 1/8 | 3 |
| 48 x 48 | 1219 x 1219 | 1/4 | 6 |
| 48 x 72 | 1219 x 1829 | 3/8 | 10 |
Full Answer
What are the dimensions of a 4x8 sheet of plywood?
11 rows · 60 x 120. 1524 x 3048. Chart represents most common plywood sheet sizes in inches (imperial ...
What is the typical size of plywood?
21 rows · Plywood is most commonly available in sheets 1220mm (4′) wide by 2440mm (8′) long. It is also ...
What is the weight of a 4x8 sheet of plywood?
Nov 22, 2021 · 1/4 inch = 7/32 inches. 3/7 inch = 11/32 inches. 1/2 inch = 15/32 inches. 5/8 inch = 19/32 inches. 3/4 inch = 23/32 inches. In fact, all wood expands as it gets wet and shrinks as it dries. Remember, plywood is made from many layers of thin wooden sheets. And the top layer needs to be sanded after the sheet is made.
What size is 23 32 plywood?
Plywood Thickness and Weights: Sanded Nominal Thickness 1/4 3/8 1/2 5/8 3/4 1-1/8 Actual Thickness 1/4 11/32 15/32 19/32 23/32 1-1/8 Approximate weight per 4x8 sheet 22.0 28.5 40.6 48 …
What Is The Actual Thickness of A Sheet of Plywood
Plywood is often sold in 1/4“, 1/2“, or 3/4” nominal thicknesses, but the actual thickness is often 1/32” thinner. Because the actual thickness may...
Why Is A 3/4” Sheet of Plywood Less Than 3/4” thick?
There are a few reasons why the actual thickness of plywood varies. First, wood shrinks as it dries and moisture leaves the wood. This means that a...
Common Plywood Dimensions
Plywood is most often sold in 4′ x 8′ sheets, but may also be available in 4′ x 10′, 4′ x 12′, or 2′ x 4′ sheets. Our plywood calculator can estima...
How much does plywood weigh?
In addition to being sturdy, plywood is also heavy. It weighs about 2.5 lbs per square foot, meaning a standard 4×8 sheet weighs 80 lbs. Of course, it’s also highly absorbent, so this weight will increase if the board gets saturated. Read on to learn about the standard plywood sheet sizes and types you can buy.
How thick is a sheet of plywood?
Hardwood Plywood comes in many lengths and widths, but the two most common sizes are 4 x 8 and 5 x 5 feet. Standard sheets are 1/2 inch thick, while non-standard thicknesses range from 1/8 inch to 3/4 inches.
What is plywood made of?
Plywood is not a specific type of wood, but rather a category of material made from thin layers of wood glued together to form long sheets. The grain of each layer is rotated 90 degrees to improve strength, reduce shrinkage, and prevent the wood from splitting. Sub-categories include MDF, OSB, and particle board.
What is hardwood plywood?
Hardwood Plywood. This is made from Alder, Ash, Beech, Birch, Bamboo, Cherry, Mahogany, Maple, and other hardwood trees. Hardwood is used for carpentry projects like cabinetry, making furniture, and other decorative applications. Sheets are usually sanded to make a smooth surface and can be stained or painted.
Who is Andrew Helling?
Andrew Helling is the founder and editor of REthority.com. He graduated from the University of Nebraska at Omaha where he obtained a Finance and Banking degree. As a formerly licensed real estate agent and property manager of 500 single-family homes, Andrew knows real estate.
Does plywood shrink when wet?
In fact, all wood expands as it gets wet and shrinks as it dries. Remember, plywood is made from many layers of thin wooden sheets. And the top layer needs to be sanded after the sheet is made. During this process, 1/32 inches is typically removed from each sheet.
How thick is plywood?
What is the Actual Thickness of a Sheet of Plywood. Plywood is often sold in 1 / 4 “, 1 / 2 “, or 3 / 4 ” nominal thicknesses, but the actual thickness is often 1 / 32 ” thinner. Because the actual thickness may vary measuring the plywood is the only accurate way to determine its thickness. A 3 / 4 ” sheet is actually 23 / 32 ” thick.
What is plywood panel?
Plywood is a wood panel that is composed of several thin layers, or plys, of wood veneer. It comes in various thicknesses and sizes, and is typically sold by its nominal thickness. While the length and width are often the actual dimensions, the nominal thickness is usually different than the actual thickness.
Is plywood thinner than plywood?
Plywood is almost always thinner than the nominal measurement due to the fact that most tooling in furniture and cabinet factories and manufacturing facilities can accommodate plywood that is thinner than expected but not thicker than expected.
How thick is plywood?
Plywood’s thickness can range from 1/8 inch, ¼ inch, 3/8 inch… etc. up to 1 ¼ inches. Note that these are nominal sizes and the actual size is often thinner. In the preparation of plywood, around 1/32 inch of its thickness may be lost to sanding. Share Tweet Share Pin.
What is hardwood plywood made of?
It is typically made of birch, oak, or mahogany. Baltic birch is a particular type of birch plywood manufactured in Europe.
What is plywood used for in a house?
With many houses, plywood forms the walls and floors. It is what keeps a house standing and the elements outside. After a frame is constructed, it’s necessary to fill in the spaces between those supports with weather-resistant material.
What is plywood veneer?
WHAT IS PLYWOOD? Plywood is one of a number of engineered wood products used in construction, along with oriented strand board (OSB) medium-density fiberboard (MDF) and particle board (or chipboard). The ply in plywood refers to wood veneers.
What is overlay plywood?
OVERLAY. As its name indicates, overlay (or decorative) plywood is intended to overlay a panel and create a smooth, paintable surface. Woods used for overlay plywood include ash, birch, mahogany, maple, and oak.
What is lumber core plywood?
For example, lumber core plywood consists of two veneers around a solid core of a less expensive wood (commonly basswood or yellow poplar). It was once common and it is still sometimes used for shelving and other indoor purposes.
What does AB plywood mean?
A plywood sheet has two face veneers. So, a sheet graded as “AB” means it is A-quality on one side and B on the other. A: This is the highest quality plywood with a smooth surface free of knots and repairs. B: This grade is largely free of knots, though some tight ones (under 1 inch) are acceptable.
How big is a sheet of plywood?
A standard sheet is 4 by 8 feet and can be found in a series of thicknesses, with specialized sizes likewise offered for crafting projects or large construction ...
How thick is 3/8 plywood?
Therefore, a sheet of plywood with a stated thickness of 3/8 inch is, in fact, 11/32 inches thick.
What is plywood made of?
Plywood is made of thin sheets of softwood glued together in layers, with the wood grain of each layer perpendicular to the next. Its size tolerances– particularly for thickness– are smaller than those for the utility-grade plywood utilized in the construction trades. The tolerance for utility plywood is 1/32 inch, ...
What is the fastest way to cut a sheet?
After determining and identifying your lines, you’re now ready making precise cuts for matching those lines. When working with a smaller sheet, using a table saw is the fastest method to cut pieces to size. For larger sheets, you’ll want to use a track saw. Jigsaws are best for curves.
Does Titebond II work?
For simpler assemblies, Titebond II works well. Finally, ensure you have all the clamps you need to keep the pieces securely in place. After you square the corners securely, continue to place clamps all along your joints to make certain each area is pulled tight. Don’t go too tight to avoid warping the panels.
What is the standard size of plywood?
As described, the most common size for a sheet of plywood is 4 x 8 feet. Hardwood plywood is also available in sizes 2 x 2 feet, 2 x 4 feet, and 4 x 4 feet.
How big is a sheet of plywood?
The standard sheet of plywood measures 4 x 8 feet. However, it comes in a variety of different thicknesses. To complicate things a bit further, there are specialty sizes available as well.
What is plywood made of?
Plywood is made from placing multiple layers of wood together and adhering them using glue. The wood grain of every individual layer is placed perpendicular to the next layer. The outside layers of every sheet determine the grade of the plywood. In some cases, this could mean that the outside layer also determines the use of the plywood. Sanded plywood, which is considered top grade, has an outer layer that is free of any kind of defects. It is made of high-quality softwood or hardwood.
What is plywood measured in?
The widths and lengths of plywood sheets manufactured for use in the U.S. are measured in English units, while those manufactured for use in Europe, Canada, Japan and other countries that use the metric system are measured in metric units.
How long is plywood?
Hardwood plywood comes also in abbreviated sheets measuring 2 by 2, 2 by 4, and 4 by 4 feet, while utility-grade plywood comes in longer 4-by-10-foot sheets. You can also buy oversized 5-foot-wide utility-grade plywood with lengths of 6, 8 and 10 feet. All but the oversized sheets are available in metric equivalents. Advertisement.
What is Baltic Birch plywood?
Baltic birch plywood is a particularly fine grade of plywood that is manufactured primarily for the European market. It comes in 5- by 5-foot sheets, and its nominal thicknesses, which are usually expressed in metric units, are 3, 6, 9, 12 and 18 mm, corresponding to 1/8, 1/4, 3/8, 1/2 and 3/4 inches. Plywood manufacturers use lauan -- sometimes called Philippine mahogany -- to make a utility-grade plywood for cabinetry and interior woodwork. It comes in standard 4- by 8-foot sheets with thicknesses of 1/8, 1/4, 5/16 and 3/4 inches.
Who is Chris Deziel?
Chris Deziel is a contractor, builder and general fix-it pro who has been active in the construction trades for 40 years . He has degrees in science and humanities and years of teaching experience. An avid craftsman and musician, Deziel began writing on home improvement topics in 2010.