How to estimate asphalt paving?
- Sample cost estimate is from the viewpoint of an asphalt paving contractor quoting a Prime / General Contractor.
- The asphalt is internally produced at a commercial asphalt plant and quoted to the project.
- The aggregate base is placed and brought to the grade tolerance by others and no prime coat is required.
- All equipment is owned.
What is cheaper poured concrete or pavers?
- Appearance. Pavers are usually more visually appealing than concrete slabs 1 because you can manipulate the pavers and create designs, and they come in a variety of colors.
- Costs. ...
- Durability. ...
- Safety. ...
How much does it cost to install pavers?
Your paver installation cost will typically range from $8 to $25 per square foot. For higher-end paving stones, prices might be as much as $50 per square foot. Below is a paver cost estimator based on some of the most common patio sizes. 6x10 (60 sq. ft.): $480–$1,500 (average) / ~$3,000 (high-end cost)
How much asphalt do I need calculator?
To use the asphalt Calculator, simply enter the width, length, and thickness (in inches) of your job. Next, click on the "Calculate" button. The calculator will estimate the number of tons of Hot Mix (asphalt) that will be required.
How much does it cost to pave something?
Depending on the material, paving a driveway can cost anywhere from $1,500 to over $11,000....Type of Driveway Material Cost Per Square Foot.Driveway Material Cost Per Square Foot EstimateConcrete$3 - $18Asphalt/Blacktop$7 - $13Gravel$1 - $37 more rows•Mar 29, 2022
How do you calculate paved driveway?
For the simplest estimate, you can use this formula.Length x width=Square footage of the driveway.Driveway sq ft x $3= low end cost.Driveway sq ft x 7= high end cost.Driveway sq ft x $2= low end cost.Driveway sq ft x $4= high end cost.When to reseal your driveway:When to repave your driveway:
How do you quote an asphalt driveway?
Amount of asphalt: consider the length, depth, and width of your driveway. Then ask your contractor to check and provide you a quote. Transportation costs: the farther your house is located, the more you are likely to pay more costs. This will also affect the type of asphalt you will use such as warm or hot mixes.
How much is a ton of asphalt in Ontario?
On average, the asphalt paving costs estimate for materials ranges between $100 to $200 per tonne. One ton covers between 40 to 80 square feet.
Is concrete driveway better than asphalt?
Overall, asphalt is less durable than concrete. With proper maintenance, it can last 30 years. Alternatively, concrete provides a sturdy, long-lasting option and can last homeowners 50+ years with occasional repairs and degreasing.
How thick should a blacktop driveway be?
Residential driveways typically use 2 to 3 inches of asphalt with 3 being suitable for occasional large trucks or heavy equipment. Underneath the asphalt you should have 6 to 8 inches of granular base aggregate. Underneath this you have soil.
What is the formula for calculating asphalt?
Multiply the length times the width times the depth to obtain the volume in cubic feet of the space to be paved. Performing this step yields 12.5 feet times 8.33 feet times 0.42 feet or 43.7 cubic feet.
What should I look at asphalt paving?
Considerations in regard to price should include quality of equipment, type of asphalt mixture, complexity of the project area, municipal ordinances, removal of existing surfaces, environmental factors and recycling options.
How do you lay asphalt yourself?
0:515:28Do it yourself Asphalt Driveway - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo we have a little stone dust under the pavers to help them sit flat and something for them toMoreSo we have a little stone dust under the pavers to help them sit flat and something for them to compact down into we're going to put a plastic edging along the outside.
How much does it cost to pave a driveway in Ontario?
Driveway construction costs by typeTypeAverage CostsDurabilityConcrete Driveway$8000+Cracks in freezing tempsAsphalt Driveway$5500+Softens in heatResin Products$9000+Damaged by snow plowsGravel$2500+Moves in snow and rain2 more rows•Apr 9, 2021
How much is paving Canada?
The Basics. The costs for asphalt will certainly fluctuate based on a variety of factors such as thickness, type, and consistency. However, asphalt tends to be priced by the square foot, with prices ranging anywhere between $3 and $5 per foot.
Is concrete cheaper than asphalt?
Because the substance used to create asphalt is less expensive than cement, asphalt driveways are usually 30% to 45% less expensive than concrete. Curing Time - Asphalt driveways can be completed faster than concrete driveways, which is the reason it is used almost exclusively for road construction.
How much does it cost to pave a driveway?
Nationwide, paving a driveway costs between $2700 and $6500. Depending on the size of your driveway and choice of materials, you could pay as little as $1200 to $12,000 or more. The average homeowner spends $4000.
How much does asphalt cost?
It costs $8.50 per square foot — $2040 for a single-car driveway and $3553 for a two-car sized drive — and is available in colors on the black-gray spectrum. The cost of materials plus labor averages $3500—$4100.
How long does a gravel driveway last?
With care, a gravel driveway can last 50 years or more before it needs a major overhaul. Gravel does have drawbacks. It’s not as hard or even as asphalt or concretion and can be a tripping hazard. It’s prone to ruts, and in cold climates, snow removal takes some of the gravel with it.
Why is my concrete driveway heaving?
The small spaces between each allow moisture to drain underneath, but in cold climates, the build-up of water and ice can cause heaving. Pros recommend using thicker, heavier slabs to keep the driveway stable. Drawbacks to concrete driveways include staining — a problem that regular cleaning solves — and cracking.
How much does it cost to repair a blacktop driveway?
Over the 15–20 year life of a blacktop driveway, repairs and maintenance cost $800–$1000. Compared to gravel, however, asphalt is solid to walk on in any footwear, including high heels. Commercial blends may be coarse or smooth. Ultra-smooth surfaces are easier to repair and maintain, but rough finishes offer traction.
Why do people put paved driveways on their homes?
A paved driveway makes your property more functional and attractive. It adds to its resale value and inspires pride. Whether you are planning to sell your home or intend to live in it for a lifetime, nothing says “welcome home” like a professionally paved driveway.
How much does concrete cost per square foot?
Concrete driveways costs slightly more than asphalt per square foot — $9.00 versus $8.50 — but it’s a favorite because it’s durable, attractive and relatively low-maintenance. Estimates for labor and materials average $3900–$6000 for a 240-square foot area.
Why do pavers undulate?
One of the main reasons pavers undulate and fail later down the line is when you skip this step. The fiber retains the integrity of the foundation and system and the foundation is vital to the longevity of a paver installation. This is highly recommended for clay conditions. Joint Sand.
What is a plate compactor?
A plate compactor is used to compact the pavers down into the bedding sand, bringing the sand 1/4 inch up on the stone. At this point, the stones are now interlocked. Joint sand is swept into the 1/16-inch paver joints and a plate compactor is used to compact the sand from top down. Back Next. Dump Fees.
Cost of Commercial Sealcoating
Learn about the factors that increase or decrease the cost of sealing or resealing asphalt on a commercial property.
What is the Cost of Paving?
The cost of paving, both residential and commercial, differs based on the type of paving you need. Get help determining the cost of driveway paving, sidewalk paving, patio paving, and more.
Concrete Driveway, Walkway, and Floor Installation
We have a $0 Zero Down, No Deposit Required Policy! Which means, you pay absolutely nothing until we are doing your job.
Concrete Driveway & Floor Repair
We have a $0 Down, No Deposit Required Policy! Which means you pay NOTHING until your job is being done!!!
Brick or Concrete Paver Installation
It's lol depends on the customer with the customer wants to pay cash check some customers pay for the concrete and pay cash for labor it all depends on the customer.
Concrete Slab Leveling or Mudjacking
Includes the cost of mudjacking or leveling concrete. Price includes lifting the height of a sunken concrete slab to its original position. Estimate does not take into account concrete resurfacing, polishing, or sealing.
Stone Paving Installation
Price range takes into account stone paving labor. Accounts for the price of compacted gravel base, flagstone pavers (dry-set), and sand for stone patio or walkway. Excludes demolition of existing paving, mortared installations, concrete pad installation, and difficult site conditions.
How much does asphalt cost per ton?
Asphalt cost per ton. Asphalt costs $40 to $80 per ton on average. Asphalt prices vary depending on the mix and material ingredients. One ton of asphalt covers 30 to 80 square feet. A 2-car driveway needs 7.5 to 18 tons of asphalt, depending on the thickness. Asphalt cost per ton by material - chart.
How much does it cost to rent an asphalt paving machine?
Renting an asphalt paving machine costs $750 to $3,600 per day on average. Asphalt roller rental costs $120 to $700 per day for ride-on compactors 3 to 4-foot wide. Renting asphalt paving machinery sometimes requires a commercial driver’s license and additional training.
How much does a 50 lb bag of asphalt cost?
A 50 lb. bag of cold-patch asphalt costs $8 to $20 and covers 5 to 7 square feet at a 1" depth. Cold-patch asphalt is the only DIY-friendly option that cures by compaction alone.
How many tons of asphalt is in a cubic yard?
There are typically 2 tons in 1 cubic yard, depending on the mixture's density. A cubic yard covers 65 to 110 square feet with an asphalt layer 3 to 5 inches deep.
How much does it cost to haul asphalt?
A bulk truckload of asphalt costs $500 to $1,800, including delivery fees. Tandem trucks carry 13 to 20 tons of asphalt that cover 550 to 850 square feet with a layer 3 to 5 inches thick. Prices vary according to the asphalt-delivery distance.
What is the difference between asphalt and blacktop?
The terms “asphalt” and “blacktop” are slightly different. Highway pavers use asphalt, which contains less stone than real blacktop. Blacktops are used for residential areas with less traffic, are easier to repair, and more durable than asphalt.
How much does a paver cost?
Pavers cost between $1 and $15 per square foot , with most homeowners spending $2 to $4 per square foot on average depending on the size, material, style, and texture. Paver material choices include clay bricks, concrete, natural stone, cobblestone, rubber, plastic, and more.
How much does it cost to install a paver patio?
A paver patio costs $10 to $17 per square foot to install, with most homeowners spending between $1,900 to $6,800 depending on the size, labor, and materials. The average cost of pavers alone is $2 to $4 per square foot for either clay brick, concrete, or natural stone.
What is the difference between cobblestone and interlocking pavers?
A cobblestone paver driveway costs more but lasts the longest, while interlocking pavers provide the best solid surface. A driveway for heavy vehicles costs more, because the base must include 6”– 12” of aggregate compared to the pedestrian 4” – 6”.
How much does a slate patio cost?
Slate patio pavers cost $5 to $10 per square foot on average or between $15 and $20 per square foot installed. Slate is another stone paver that is usually larger in size and square, making installation faster. Their nonslip properties are excellent for patios that surround a pool.
How much does an interlocking paver cost?
Interlocking paver blocks cost $2 to $8 per square foot on average and typically come pre-sealed. They are installed quickly, can be used immediately, are stronger than a concrete slab, require little maintenance, and last up to 30 years. Modular pavers cost $2 to $7 per square foot on average.
How much does it cost to install concrete slabs?
A concrete slab costs $4 to $8 per square foot and is cheaper than pavers unless you add coloring or stamping. Installing pavers costs $10 to $17 per square foot or about twice as much as laying concrete. Pavers are easier to repair, and concrete slabs are more affordable.
How much does porcelain pavers cost?
Porcelain pavers cost $5 to $10 per square foot on average or $12 to $20 per square foot installed. Porcelain pavers support heavy foot traffic and have a slip-resistant matte finish. Their impermeability makes them stain and frost proof and able to withstand de-icing chemicals in northern climates.