Cost to Pave a Driveway
| Driveway Paving Cost Calculator | Zip Code | Sq. ft. | |
| Paving Material Prices | $375.00 - $437.50 | $462.50 - $525.00 | $550.00 - $650.00 |
| Installation Cost | $1250.00 - $1275.00 | $1500.00 - $1575.00 | $2250.00 - $2900.00 |
| Total | $1625.00 - $1712.50 | $1962.50 - $2100.00 | $2800.00 - $3550.00 |
| Total Average Cost per square foot | $6.67 | $8.13 | $12.70 |
How much to install pavers by square foot?
What type of material you choose for your pavers is one of the biggest components used to calculate the cost to install pavers in your yard, garden, or as a complete patio. For the labor to install pavers alone, be prepared to pay approximately $50 to $80 per hour, which translates to around $4 to $11 per square foot.
How much does asphalt paving cost per sqft?
There are many factors that affect the asphalt paving costs per square foot including: Asphalt paving costs per square foot range between $2.50 to $4.00 per square foot. The bigger your driveway the more materials will be needed. Uniquely shaped driveways require more work to cover than straightforward parking spaces.
How much are pavers installed per square foot?
To estimate the total pavers cost simply state the price of a single brick, and the paver calculator will do the work for you. To get the estimated cost of installation, put in the cost of installation per square foot. Typically, it costs somewhere between $8 and $20, but the prices will vary depending on your location.
How much does it cost to get pavers installed?
Written by HomeAdvisor. Pavers usually cost between $8 to $25 per square foot to install although high-end stone paver installations can hit almost $50 per square foot. Installing a typical, 280 square foot paver patio costs an average of $3,400 or from 2,400 to $7,000.
How much does it cost to pave 900 square feet?
Asphalt paving costs $3 to $7 per square foot on average. Asphalt materials and installation labor costs $2 to $4 per square foot, plus basic excavating and installing a gravel subgrade costs $1 to $3 per square foot. Adding colors, patterns, curbs, or sidewalks cost extra.
Is blacktop cheaper than concrete?
The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. Asphalt prices tend to fluctuate with fluctuations in crude oil prices. In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation.
Why is paving a driveway so expensive?
Labor. Labor also drives the cost of driveway paving since it's a labor-intensive process. The labor cost to pave an average 450-square-foot driveway could run $5 to $7 per square foot or about $2,250. A driveway that has curves or is circular will cost more to complete, so labor costs will also increase.
How much is asphalt per square foot in Ontario?
between $2.50 to $4.00 per square footAsphalt paving costs per square foot range between $2.50 to $4.00 per square foot. The bigger your driveway the more materials will be needed. Uniquely shaped driveways require more work to cover than straightforward parking spaces.
Is it cheaper to lay concrete or pavers?
As far as installation costs and concrete costs go, poured concrete is technically the most affordable per square foot. However, even though the upfront cost of pavers is higher, concrete pavers offer greater value and durability than poured concrete and stamped concrete.
Is there a difference between asphalt and blacktop?
Asphalt generally refers to major highways and streets, whereas, blacktop is commonly used to refer to driveways and residential roads. As a matter of fact, blacktop is a type of asphalt. First let's consider how asphalt is made and what materials it uses.
Do pavers last longer than concrete?
Meanwhile, pavers are incredibly durable and it's easy to replace individual stones as needed, so the maintenance costs are lower over time and the stones will last much longer than the concrete surface.
Can you pave driveway yourself?
Making your own asphalt driveway is hard work, and not a job for one person. If you have friends who will help you, it is possible to save a lot of money by doing your own driveway, even after the cost of rental equipment is factored in.
Is concrete driveway better than asphalt?
Concrete driveways normally last longer than asphalt. In general, if installed properly in a suitable climate and maintained regularly, your concrete driveway should last 30 to 40 years, while an asphalt driveway is generally good for 20 to 30 years.
What is the cheapest type of driveway?
Aggregate, or gravel, is the cheapest and most durable of these four common driveway materials.
How much does it cost to pave a driveway in Canada?
Asphalt / blacktop driveway Asphalt driveway paving costs $3 to $7 per square foot or $1,800 to $4,200 on average for a 600 square foot two-car driveway.
How much is paving Canada?
The Basics. The costs for asphalt will certainly fluctuate based on a variety of factors such as thickness, type, and consistency. However, asphalt tends to be priced by the square foot, with prices ranging anywhere between $3 and $5 per foot.
What’s the cheapest type of driveway material?
Gravel is the least costly material to pave a driveway. The price ranges from $1 to $3 per square foot. The average total cost is usually around $1...
How long can a driveway last?
It depends on the material used to pave the driveway. Gravel can last up to 100 years with a solid foundation and regular maintenance. Concrete can...
How long does it take before you can drive on a new driveway?
Different materials require different times to cure. Asphalt takes at least 48 to 72 hours to fully cure while concrete can take seven to 10 days....
How much does it cost to dump a 1,000 square foot driveway?
The price for each dirt load comes out to approximately $160 and $121 for each concrete load.
How much does a stone cost per square foot?
Typically, standard paving stones are priced from $2.53 to $3.69 per square foot, plus tax. Prices vary depending on the manufacturer, style, or texture that you choose. When installing pavers, you will have to account for wasted paving stones.
What materials are needed for pavers?
When considering the materials needed for a paver installation, you will be looking at the following: 1 Pavers 2 Class II Road Base 3 Geotextile Fabric 4 Bedding Sand 5 Concrete 6 Joint Sand
What is the difference between pavers and labor?
Labor. The one cost of any paver installation that will make the biggest difference is the quality of labor. This is where the saying “you get what you pay for” comes into effect If you are looking for a quality paver installation. For guaranteed quality, you should work with installers with the most experience.
How much does geotextile fiber cost?
The cost of the fiber is roughly $0.37 per square foot (taxes included).
How much does a paver cost?
Pavers cost between $1 and $15 per square foot , with most homeowners spending $2 to $4 per square foot on average depending on the size, material, style, and texture. Paver material choices include clay bricks, concrete, natural stone, cobblestone, rubber, plastic, and more.
How much does it cost to install a paver patio?
A paver patio costs $10 to $17 per square foot to install, with most homeowners spending between $1,900 to $6,800 depending on the size, labor, and materials. The average cost of pavers alone is $2 to $4 per square foot for either clay brick, concrete, or natural stone.
What is the difference between cobblestone and interlocking pavers?
A cobblestone paver driveway costs more but lasts the longest, while interlocking pavers provide the best solid surface. A driveway for heavy vehicles costs more, because the base must include 6”– 12” of aggregate compared to the pedestrian 4” – 6”.
How much does a slate patio cost?
Slate patio pavers cost $5 to $10 per square foot on average or between $15 and $20 per square foot installed. Slate is another stone paver that is usually larger in size and square, making installation faster. Their nonslip properties are excellent for patios that surround a pool.
How much does an interlocking paver cost?
Interlocking paver blocks cost $2 to $8 per square foot on average and typically come pre-sealed. They are installed quickly, can be used immediately, are stronger than a concrete slab, require little maintenance, and last up to 30 years. Modular pavers cost $2 to $7 per square foot on average.
How much does it cost to install concrete slabs?
A concrete slab costs $4 to $8 per square foot and is cheaper than pavers unless you add coloring or stamping. Installing pavers costs $10 to $17 per square foot or about twice as much as laying concrete. Pavers are easier to repair, and concrete slabs are more affordable.
How much does porcelain pavers cost?
Porcelain pavers cost $5 to $10 per square foot on average or $12 to $20 per square foot installed. Porcelain pavers support heavy foot traffic and have a slip-resistant matte finish. Their impermeability makes them stain and frost proof and able to withstand de-icing chemicals in northern climates.
Compare Quotes From Top-rated Local Flooring Contractors
The average costs to pave a driveway range between $3 and $15 per square foot. The cost depends on materials, size of the driveway and installation requirements. Expensive materials can cost as much as $30 per square foot while cheaper materials are as low as $1 per square foot.
Driveway Cost Per Square Foot
The cost of driveway installations is typically determined by the driveway site’s square footage. While the material itself and the installation cost affect the price per square foot, the square footage of a driveway will sum the total cost of the project.
Driveway Cost By Material Type
Depending on the material, paving a driveway can cost anywhere from $1,500 to over $11,000. Concrete is a popular choice because of its durability and long-lasting nature. Other popular types of driveways include asphalt or blacktop, gravel, pavers and rubber.
Driveway Installation Cost
The total cost of driveway installation depends on the size of the driveway, site conditions and the material used. Labor can make up about half of the total price per square foot while the price for new material can make up the other half. Thickness can affect material cost, especially for concrete and asphalt.
Frequently Asked Questions
Gravel is the least costly material to pave a driveway. The price ranges from $1 to $3 per square foot. The average total cost is usually around $1,200, though this number may not account for the fact that gravel is usually used to pave much larger driveways as a cost-reduction solution.
Cost of Commercial Sealcoating
Learn about the factors that increase or decrease the cost of sealing or resealing asphalt on a commercial property.
What is the Cost of Paving?
The cost of paving, both residential and commercial, differs based on the type of paving you need. Get help determining the cost of driveway paving, sidewalk paving, patio paving, and more.
Concrete Driveway, Walkway, and Floor Installation
We have a $0 Zero Down, No Deposit Required Policy! Which means, you pay absolutely nothing until we are doing your job.
Concrete Driveway & Floor Repair
We have a $0 Down, No Deposit Required Policy! Which means you pay NOTHING until your job is being done!!!
Brick or Concrete Paver Installation
It's lol depends on the customer with the customer wants to pay cash check some customers pay for the concrete and pay cash for labor it all depends on the customer.
Concrete Slab Leveling or Mudjacking
Includes the cost of mudjacking or leveling concrete. Price includes lifting the height of a sunken concrete slab to its original position. Estimate does not take into account concrete resurfacing, polishing, or sealing.
Stone Paving Installation
Price range takes into account stone paving labor. Accounts for the price of compacted gravel base, flagstone pavers (dry-set), and sand for stone patio or walkway. Excludes demolition of existing paving, mortared installations, concrete pad installation, and difficult site conditions.
How much does concrete cost per square foot?
Concrete slabs typically cost about $ 6 per square foot (installation included), so although relatively cheaper than some of the options above, when maintenance and repair costs start to kick in, they become the more expensive choice. Pavers have 3 very distinct advantages when compared to concrete, they are: Aesthetics.
How long do pavers last?
Here are the good news, with periodic maintenance, pavers last for decades without requiring any heavy maintenance.
What are the advantages of pavers over concrete?
Pavers have 3 very distinct advantages when compared to concrete, they are: Aesthetics. Visually speaking, paver designs are much more beautiful. This appeal can be explained by the fact that pavers come in different colors, shapes, and textures.
Why do pavers shift?
The soil, due to natural characteristics, tends to shift. Pavers’ installation allows it to be malleable to the ground, and these variations are unlikely to affect them. Concrete slabs, on the other hand, don’t have this same flexible characteristic.
Why do we need pavers?
Pavers allow you to be creative in your design, so you hardly will find a project similar to yours. Pavers allow you to add a personal touch, whether on your driveway, walkway, around the pool, a living space, in short, the options are countless.
Is it cheaper to replace a concrete slab?
Therefore, it’s clear that although it appears that the cost of a concrete slab is cheaper, eventually, it becomes more expensive in the long run.
How much does it cost to install asphalt 1?
Asphalt 1 – asphaltic concrete 3 is usually installed at a depth of no less than 2″. For this project, the asphalt 1 is at 2.5″ and would cost roughly $830 installed. This tends to have a lifespan of 10 to 30 years and will need treatment every six to ten years to maintain its good looks and durability.
How wide is a driveway?
Usually, 9 to 10 feet wide is enough for a car but if you have a lot of vehicular movement in your house. Then you have to consider a double lane. A driveway typically extends into a truck C road or a street curb into the garage in your home. The square footage is an important factor to consider when determining the cost of the pavement. The cost of renting special equipment make a driveway less than 10 feet costlier than other sizes.
What is the mix of asphalt and sand?
Most pavements consist of 5 to 10 % asphalt mixed with 90 to 95% aggregate and sand while macadam the active agent binds them together. Please note that to enhance the pavement surface performance, the temperature of the asphalt must be maintained to the barest minimum to retain its flexibility.
What is the constituent of asphalt?
A Constituent Of Asphalt Pavement. Asphalt pavement is consist of sand, the stone of different sizes, additives and liquid petroleum. Asphalt which is also known as bitumen has macadam which serves as a glue when paving. This is the active binder that makes all other constituent stick together.
What is the greatest strength of asphalt pavement?
Flexibility is the greatest strength of asphalt pavement, allowing the surface to adapt to varying surface changes caused by weather and soil movements. Asphalt pavement is build surface that it does not retain water on its surface.
How long does asphalt last?
Asphalt paving is widely used because it lasts longer than most types of pavements with a life span of over 20 to 25 years if laid properly. When it is fully replaced by scarification, the scientist has found a way of recycling this by-product of a petroleum refinery, asphalt is the commonest recycled material in the United States ...
How thick were Roman roads?
The thickness of these military roads was about 0.9mand with a width of 4.3 or less but it has been observed that some Roman roads have a thickness of 2.4m.
How much does it cost to pave a road?
Cost to pave an asphalt road. The average cost to pave a private one-lane asphalt road is $35 to $85 per linear foot. Paving a two-lane (24'-wide) asphalt road costs $70 to $170 per linear foot or $370,000 to $900,000 per mile. Blacktop road construction costs more than driveways because roads need 5" to 11" thick asphalt.
How much does it cost to pave a parking lot?
Cost to pave an asphalt parking lot. Paving an asphalt parking lot costs $3 to $7 per square foot, not including marking, striping, curbing, or permits. Paving a 10-car asphalt parking lot costs $9,000 to $21,000 on average or $900 to $2,100 per space of 300 square feet.
How thick should a driveway be?
A new residential driveway needs 3 to 5 inches of asphalt over 4 to 8 inches of rock-base foundation to withstand temperature changes and last 20+ years. Some companies recommend a 2" thickness to save $0.50 to $1 per square foot, but won't provide a warranty due to deterioration risks.
How much does it cost to repave an asphalt driveway?
The average cost to repave an asphalt driveway is $4 to $10 per square foot with a new gravel base or $3 to $7 per square foot with an existing base. Repaving a 2-car (20’x20’) asphalt driveway costs $1,600 to $4,000 on average. Repaving includes removing and hauling away the existing asphalt.
How long does asphalt last?
An asphalt driveway lasts 15 to 30 years and requires sealcoating every 3 to 5 years. Boosts curb appeal and resale value. A new asphalt driveway needs an asphalt layer 3" to 5" thick to last. Resurfacing only the top layer or asphalt overlay costs $1 to $3 per square foot.
How much does stamped asphalt cost?
Colored or stamped asphalt costs $5 to $15 per square foot for a new driveway or replacement, or $3 to $8 per square foot for resurfacing the top layer. A 20x20 stamped asphalt driveway costs $2,400 to $6,000. Decorative patterns are sealcoated, which colors and protects the surface.
How much does it cost to lay asphalt over concrete?
Laying new asphalt over a concrete driveway costs $1 to $3 per square foot. Contractors fill cracks with concrete-repair caulk before paving. Resurfacing concrete with asphalt is cheaper than replacing concrete. However, special preparation is required to stabilize the concrete and prevent cracks.
How much does it cost to install asphalt?
Expect to pay about $1 to $2.50 per square foot for materials. Asphalt installation cost factors include the depth of the paving, shipping and freight fees, and local market prices.
How much does concrete cost per square foot?
Concrete parking lots range between $4 and $7 per square foot, including both materials and labor. It typically includes the cost to deliver concrete. Multiple bids can help you find the exact rate for your project.
How much does it cost to build a parking lot?
New parking lot construction costs on average between $2.50 and $7 per square foot for both materials and labor. Expect to pay between $2.50 and $4.50 for asphalt or $4 to $7 for concrete.
How often do parking lots need to be repaved?
Parking lots need to be repaved about every 15 to 20 years.
How many parking spaces are required for ADA?
Some, but not all municipalities require a minimum of three parking spaces per 1,000 square feet of floor space. Most states require permits before the installation can begin. Return to Top.