How much does asphalt paving cost per sqft?
Since asphalt paving cost depends on a number of factors, it's hard to give an exact figure of what you'll have to pay to have your driveway or parking lot installed. Generally speaking, asphalt paving cost per sqft ranges from $3 to $6, but you'll want to keep these various factors in mind when searching for a contractor and getting estimates:
How much does sidewalk paving cost?
Typical costs, differentiated by quality and décor, include: Basic - $3-5 per square foot. Median - $5-10 per square foot. Premium - $10-15+ per square foot. Sidewalk pavers are commonly made similarly to bricks. In fact, some projects substitute bricks for sidewalk pavers.
How much does a paved driveway cost?
Asphalt Driveway Cost. The cost to pave, replace or resurface asphalt averages between $2,844 and $6,295, though the project can cost as little as $1,500 or as much as $10,000. Homeowners typically spend an average of $4,500.
How much sand for paving?
As a rough example, you will need between 1 x 20-25 kg bag of sand per 15-30 square meters of paving. Now that you have what you need to start, let's go step by step: The first step in the process is to protect any plants, nearby areas, or furniture that you can damage using a power washer and cover it with the tarp.
How do you calculate paved driveway?
For the simplest estimate, you can use this formula.Length x width=Square footage of the driveway.Driveway sq ft x $3= low end cost.Driveway sq ft x 7= high end cost.Driveway sq ft x $2= low end cost.Driveway sq ft x $4= high end cost.When to reseal your driveway:When to repave your driveway:
How much does it cost to pave something?
Depending on the material, paving a driveway can cost anywhere from $1,500 to over $11,000....Type of Driveway Material Cost Per Square Foot.Driveway Material Cost Per Square Foot EstimateConcrete$3 - $18Asphalt/Blacktop$7 - $13Gravel$1 - $37 more rows•Mar 29, 2022
How much is a 700 ft driveway?
For a larger driveway or thicker base, the cost will be higher. For example, a driveway 15 feet wide by 700 feet long with a six inch base will need approximately 25 tons of gravel, at a material cost of about $700. With delivery, the total cost will be around $1000.
How do you quote asphalt?
For example, a 10′ wide x 20′ long driveway with a depth of 3″ would be 50 cubic feet. To find the amount of asphalt needed, multiply the cubic footage by 145 to find the total weight needed, then divide by 2,000.
Is it cheaper to pave or concrete a driveway?
As far as installation costs and concrete costs go, poured concrete is technically the most affordable per square foot. However, even though the upfront cost of pavers is higher, concrete pavers offer greater value and durability than poured concrete and stamped concrete.
Can you pave driveway yourself?
The process of paving with asphalt is not difficult, but proper asphalt installation requires heavy equipment that most homeowners do not possess. You might not be able to install asphalt by yourself, but understanding the operation will allow you to ensure that your hired contractor is doing it correctly.
What is the cheapest type of driveway?
Aggregate, or gravel, is the cheapest and most durable of these four common driveway materials.
Is blacktop cheaper than concrete?
The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 – $4.00 per square foot. Asphalt prices tend to fluctuate with fluctuations in crude oil prices. In contrast, a concrete driveway costs between $4.00 – $6.00 per square foot for a standard installation.
Is concrete driveway better than asphalt?
Concrete driveways normally last longer than asphalt. In general, if installed properly in a suitable climate and maintained regularly, your concrete driveway should last 30 to 40 years, while an asphalt driveway is generally good for 20 to 30 years.
How do you calculate asphalt cost?
Asphalt is usually priced by square foot. The cost per ton is $40 to $80 and per square foot is $0.75 to $2.00. The cost is determined by the size of rock in the asphalt, volume ordered, delivery cost, and the location of the work being performed.
How thick should a blacktop driveway be?
Residential driveways typically use 2 to 3 inches of asphalt with 3 being suitable for occasional large trucks or heavy equipment. Underneath the asphalt you should have 6 to 8 inches of granular base aggregate. Underneath this you have soil.
Why is asphalt so expensive?
Unfortunately, thanks to the unstable economy, sulphur fuel regulations, trade restrictions and the promise of more tariffs, construction industry experts predict the cost for raw materials like asphalt and concrete will skyrocket in the coming year.
Cheapest Driveway Material?
Gravel is by far the cheapest driveway material and one of the longest-lasting materials with a lifespan of 100 years. It still needs regular maint...
How Long Does a Driveway Last?
Driveways typically last around 30 years total, but some need more maintenance than others. Asphalt and concrete driveways need maintenance every f...
How Much Value Does a New Driveway Add?
On average a new driveway can add between $5,000 to $7,000 in added home value. Of course, that value depends upon the size of your driveway.
Which is Cheaper? Concrete or Asphalt Driveway?
Asphalt runs slightly cheaper than concrete with an average square foot cost of $3 to $7 but it won’t last as long as concrete. A concrete driveway...
How Long to Wait Before Driving on New Driveway?
It’s typically recommended that you stay off a new asphalt driveway for 24 hours, longer if it’s humid out. If you have a concrete driveway, you’ll...
How Often Should You Seal a Driveway?
Professionals recommend resealing an asphalt driveway every three to five years but it could be sooner depending upon the state of your driveway. P...
What size paver brick should I use?
Common paver sizes. The most commonly used paver brick size is 4" x 8" (10cm x 20cm in the metric system ). However, other sizes are not rare at all. Here's a table of the most widely used paver brick sizes, along with their corresponding dimensions in the metric system: Size (in) Size (cm)
How do I measure a patio?
Start by choosing whether your patio is a single rectangle or if it has a different shape, in which case you need to divide it into identical rectangles to make the calculation easier. NOTE: Don't worry if the shape of your patio is impossible to divide into rectangles of the same size.
Why do you need pavers for a patio?
There is a number of reasons why we think it's a great idea to have your patio done with pavers. Paved patios are durable. Pavers are usually made of concrete, clay brick or even natural stone. There aren't many construction materials stronger than that.
Is paving prone to mistakes?
As is the case with all construction works, paving is prone to mistakes. To avoid having to waste gasoline going back and forth to the store for additional materials, consider buying at least 10% more of everything.
Can concrete crack in winter?
Solid surfaces, such as concrete, are prone to cracking and generally don't fare very well in places where the temperature changes drastically between seasons. You can see it on many roads - notice how many new potholes tend to appear after winter. With pavers, this will not be an issue. They are low maintenance.
Driveway Costs
A new driveway can add some curb appeal and more. It comes with a cost and a commitment for a few days to get the project done. A driveway costs between $1,700 to $7,000 for materials and averages $4,500. Expect to pay between $2 and $15 per square foot for materials and installation.
Driveway Cost Per Square Foot
The cost of a driveway will depend upon the condition of your current driveway, its size and the material you want to use. Gravel is the cheapest material to use at just $1 to $3 per square foot while a heated driveway is the most expensive at $12 to $18 per square foot.
Driveway Cost by Material
A gravel driveway is the cheapest way to go and it’ll last more than 100 years with regular maintenance. But it’s not attractive to every homeowner and tends to kick up dust on vehicles. Concrete driveways remain a low-cost option because they come in slightly cheaper than an asphalt driveway and often require less maintenance.
Driveway Construction Cost
Building a driveway will cost around $3 to $12 on average, depending upon the size of the driveway and the selected material. Expect to pay as much in labor as you do for materials. Labor costs can increase if the driveway needs leveling, too.
When to Build a Driveway
Depending upon your climate, summer is likely the best time to build a driveway. Plan when there are a few clear days of moderate temperatures. Installing an asphalt driveway is dirty work and you need a few days of clear skies to get it done.
Frequently Asked Questions (FAQs)
Gravel is by far the cheapest driveway material and one of the longest-lasting materials with a lifespan of 100 years. It still needs regular maintenance and dust suppression.
How much does a paver driveway cost?
They offer a wide variety of designs, shapes, sizes, and colors. A paver driveway will cost between $13-15 per square foot. A poured concrete driveway ranges from $7-9 per sq ft.
How much does it cost to install asphalt?
Asphalt paving material usually costs $40-80 a ton. One ton will cover 30 to 80 square feet. A residential driveway averages 9-24 square feet. Other materials are needed for asphalt driveway installation as well, and will affect the final cost.
What is the most expensive option to have a driveway removed?
Repaving. Repaving your driveway requires removing the old driveway completely. This is the most expensive option, because you will be paying to have the old driveway removed and a new driveway installed. This is of course the most expensive option, but a paved driveway has a lifespan.
What is resurfacing a driveway?
Resurfacing is the middle ground of driveway repair. It’s also known as asphalt overlay. In many cases, this can repair significant asphalt cracks. Existing asphalt is covered with a new layer of asphalt, in a process similar to the original driveway.
Why does asphalt crack?
Over time, the heat from the sun’s rays will begin to break down the materials in the asphalt and remove moisture. As the asphalt weakens due to the sun, cracks begin to form.
How long can you drive on a driveway after it's installed?
You won’t be able to drive on our driveway for 3-5 days after it’s installed. You’ll need to avoid parking on the driveway for the first 14 days, particularly in the hot part of the day.
What is the cheapest driveway?
A gravel driveway is the cheapest option if you need a new driveway, at $1-3 per sq ft. It matches with any style of home. Classic gray gravel is well suited to a winding country drive. White gravel provides a modern look.
Garden Paving Slabs
Minster Paving has been producing and selling garden paving slabs for over 30 years. We are a family-owned company manufacturing and supplying attractive, durable paving products throughout Oxford and the UK.
Contact Us For Your Paving Slabs
For more information about our range, call us today on 01865 300252 or contact us online.
How much does asphalt cost per ton?
Asphalt cost per ton. Asphalt costs $40 to $80 per ton on average. Asphalt prices vary depending on the mix and material ingredients. One ton of asphalt covers 30 to 80 square feet. A 2-car driveway needs 7.5 to 18 tons of asphalt, depending on the thickness. Asphalt cost per ton by material - chart.
How much does it cost to rent an asphalt paving machine?
Renting an asphalt paving machine costs $750 to $3,600 per day on average. Asphalt roller rental costs $120 to $700 per day for ride-on compactors 3 to 4-foot wide. Renting asphalt paving machinery sometimes requires a commercial driver’s license and additional training.
How much does a 50 lb bag of asphalt cost?
A 50 lb. bag of cold-patch asphalt costs $8 to $20 and covers 5 to 7 square feet at a 1" depth. Cold-patch asphalt is the only DIY-friendly option that cures by compaction alone.
How many tons of asphalt is in a cubic yard?
There are typically 2 tons in 1 cubic yard, depending on the mixture's density. A cubic yard covers 65 to 110 square feet with an asphalt layer 3 to 5 inches deep.
How much does it cost to haul asphalt?
A bulk truckload of asphalt costs $500 to $1,800, including delivery fees. Tandem trucks carry 13 to 20 tons of asphalt that cover 550 to 850 square feet with a layer 3 to 5 inches thick. Prices vary according to the asphalt-delivery distance.
What is the difference between asphalt and blacktop?
The terms “asphalt” and “blacktop” are slightly different. Highway pavers use asphalt, which contains less stone than real blacktop. Blacktops are used for residential areas with less traffic, are easier to repair, and more durable than asphalt.
Asphalt calculator formula
Based on the measurements you provide for required length, width and thickness, the calculator first works out the area and volume of the hot asphalt mix required using the below formulas:
Calculation examples
Imagine I want to pave over an area measuring 20 feet by 4 feet to a thickness of 6 inches using standard asphalt (140 lb/ft³) and costing $150 per US short ton.
What if my measurements are in different units?
The best thing about our asphalt calculator is that it takes care of this for you.
How much does it cost to install asphalt?
Expect to pay about $1 to $2.50 per square foot for materials. Asphalt installation cost factors include the depth of the paving, shipping and freight fees, and local market prices.
How much does it cost to build a parking lot?
New parking lot construction costs on average between $2.50 and $7 per square foot for both materials and labor. Expect to pay between $2.50 and $4.50 for asphalt or $4 to $7 for concrete.
How much does concrete cost per square foot?
Concrete parking lots range between $4 and $7 per square foot, including both materials and labor. It typically includes the cost to deliver concrete. Multiple bids can help you find the exact rate for your project.
How often do parking lots need to be repaved?
Parking lots need to be repaved about every 15 to 20 years.