Receiving Helpdesk

paint calculator by square foot

by Ursula Rowe Published 3 years ago Updated 2 years ago

How to Calculate: To find the amount of paint you need per wall, use this simple formula: W x H = AREA in square feet 360 = approximate square footage covered by one gallon of paint

The Calculation
To find the area of a wall, we multiply wall height by wall width. The estimate divides the total square footage by 350, as one gallon of paint covers 350 square feet. Your paint calculation will update if you change the number of desired coats of paint.
Jul 10, 2019

Full Answer

How much paint is needed for a 12x12 room?

Usually, a master bedroom sizes 12X12 feet and height is around 10 feet For re-painting, 4 liters of paint is required to cover ceiling and wall. For fresh painting, 7 litre of paint is required to cover ceiling and wall.

How much paint is needed per square foot?

• As a rule of thumb, one gallon of quality paint will usually cover 400 square feet. One quart will cover 100 square feet. Because you need to cover 328 square feet

How much do painters charge per square foot?

How Much Do Painters Charge per Square Foot? Painters usually charge between $1.50 and $3.50 per square foot to paint the interior of a house. Add in ceilings, walls and trim and the number rises to $3 to $4 per square foot, according to Smart Asset.

How much does it cost per square foot to paint?

On average, expect to pay $0.60–$1.60 per square foot for exterior painting. The average for painting labor across the country is $30–$40 per hour before you pay for paint, painting supplies, location costs, and equipment.

How much paint do I need by square footage?

Paint usually is applied at 350 to 400 square feet per gallon (primer at 200 to 300 square feet per gallon). Use the Area section below to calculate the walls and ceiling values.

How much paint does it take to cover 1000 sq ft?

Those walls will require two coats, so you'll ultimately be covering 1,000 square feet. At 325 square feet per gallon, you'll need a little over 3 gallons (1,000 ÷ 325 = 3.08 gallons, to be precise). In general, it's rarely a mistake to round up and purchase slightly more paint than the math indicates you'll need.

How many sq ft does a gallon of paint cover?

400 square feetHow Much Paint Per Square Foot? One gallon can of paint will cover up to 400 square feet, which is enough to cover a small room like a bathroom. Two gallon cans of paint cover up to 800 square feet, which is enough to cover an average size room.

How many sq ft does a 5 gallon bucket of paint cover?

1,800 square feetAccording to our paint estimator, 5 gallons of paint can cover as much as 1,800 square feet. A quart of paint will coat about 90 square feet of space.

How much paint do I need for a 2000 square foot house interior?

5 gallonsSo, for 2000 square feet, you will likely need 5 gallons of interior house paint. For the top rated interior house paint, you can expect to pay anywhere between $50 – $80 per gallon.

How much interior paint do I need for a 1500 square foot house?

How Much Paint do You Need? Picture Guide – Exterior + InteriorHouse SizeBody/WallsTrim/Baseboards1500 sq ft.1232500 sq ft.1843500 sq ft.2565000 sq ft.358Jan 9, 2018

How do I calculate how much paint I need?

Measure the length and width of the floor area of the room, and multiply the two measurements. For example, if the room is 4 metres wide, and 6 metres long, 4 x 6 = 24 square metres. 2 coats will be required, so you will need enough paint to cover 48 square metres in total.

How many gallons of paint do I need for a 10x10 room?

How much paint for a 10×10 room:- as per general practices, for fresh painting of a 10×10 room, you will need approximately 1.4 gallons or 5.5 litres of paint to cover interior wall and ceiling and for repainting, 0.8 gallons or 3 litres of paint will be required.

How do you estimate painting work?

How to Estimate a Painting JobInspect the Space to be Painted. ... Measure the Paintable Area and Its Condition. ... Estimate the Manpower. ... Estimate the Materials. ... Compute All Costs Including Overhead. ... For Homeowners.

How much paint do I need for a 1400 sq ft house?

As per general guidelines, for painting of house of a 1400 square foot area, generally you will need approximately 8 to 9 gallons or 30 to 34 litres of exterior paint and 2 gallons paint for exterior trim for about two coat.

How much will 10 gallons paint cover?

Most professionals use the formula of 350 to 400 square feet of wall coverage per gallon of paint and 200 square feet of wall coverage per gallon of primer. It's important to note that different types and manufacturers may cover more or less area.

Does spraying use more paint than rolling?

Rolling paint is the frugal homeowner's choice. Then, if you choose to use a sprayer anyway, you'll still need to buy more paint: Sprayers use about 33 percent more paint than rollers do. For a fraction of the cost, rolling paint is the budget-friendly way to go.

How many gallons does it take to cover 1000 square feet?

On average you would use about 2 gallons of water per 1000 sq/ft.

How do I estimate how much paint I need?

Measure the length and width of the floor area of the room, and multiply the two measurements. For example, if the room is 4 metres wide, and 6 metres long, 4 x 6 = 24 square metres. 2 coats will be required, so you will need enough paint to cover 48 square metres in total.

How much paint is needed for a 10x10 room?

How much paint for a 10×10 room:- as per general practices, for fresh painting of a 10×10 room, you will need approximately 1.4 gallons or 5.5 litres of paint to cover interior wall and ceiling and for repainting, 0.8 gallons or 3 litres of paint will be required.

How much does it cost to paint a 12x16 room?

Painters charge $300 to $1,000 per room on average, depending on the size. The average cost to paint a 12x12 room is $400 to $950. Labor costs alone are $180 to $650 per room.

How much does a painting cost per square foot?

Keep in mind that many painting pros charge per square foot rather than per hour of labor. Painting prices for multiple room will be $2-4 per square foot, depending on the scope of work. When you get price estimates from different painting pros, its usually safe to go for a middle of the road estimate.

How much does it cost to paint a 2,000 sq ft home?

Thus, painting a 2,000 sq.ft. home costs about $6,000-7,500. Depending on total square footage, job complexity and the quality of primer and paint used the cost can go up to $5-6 per square foot.

How much does interior paint cost?

Cheap paint by brands like Valspar can cost as little as $20-30 per gallon for flat/matte paint. High-end brands, such as Farrow and Ball , that have very high quality pigments that don’t fade overtime as well as unique colors can cost as much as $100-120 per gallon.

How much does it cost to paint one room?

Hiring a pro to paint one standard size room costs $450-650, depending on the scope of work and local labor fees.

How much does it cost to test for lead paint?

Professional lead testing costs $350-500 for a three bedroom, 2 bathroom house. Be sure to ask the assessor if the lead found actually poses a risk and needs to be removed.

How much does it cost to hire a painting pro?

Hiring a painting pro costs $30-50 per hour and depends on the scope of work as well as local labor rates. A pro can cover about 100-120 square feet of flat wall space per hour. If you have a very small painting project, like painting one room, you can easily hire a handyman for the job and pay $20-25 per hour.

Why is painting one room so expensive?

Painting one room is so expensive because a pro has to include the cost of set up and clean up as well as his overhead into a small job. For him, this cost remains the same whether he is painting 200 sq.ft. of space or 2,000 sq.ft. of space.

How much does a 5 gallon paint cover?

How much does 5 gallons of paint cover? How much does a quart cover? According to our paint estimator, 5 gallons of paint can cover as much as 1,800 square feet. A quart of paint will coat about 90 square feet of space.

How much does it cost to paint an interior?

Average cost of an interior paint job: Painting a home interior costs $1,780 on average. An entire 2,300-square-foot home can cost between $4,000 and $11,000 to paint.

How to find square footage of a sloping wall?

To calculate a triangle’s square footage, multiply the length of the wall at the base of the triangle by its height and divide by 2.

How to measure wall height?

1. Wall Height. Measure from floor to ceiling. 2. Wall perimeter for areas you plan to paint. Measure the length of each wall. Add all length figures together to obtain the total horizontal distance, or perimeter. 3. Ceiling width and length.

What is the best paint for a bathroom?

If you’re painting the interior of your home, eggshell and satin paint finishes are easy to clean. Semi-gloss is a great option for bathrooms, since it can handle more moisture than other paints. Matte finishes work well in low-traffic areas since they’re more prone to stains.

How to enter dimensions for other size openings?

In order to enter dimensions for other size openings you can click on the box showing the ‘+’ sign for as many extra openings as you need. When you have finished entering dimensions for all the openings, click on the CALCULATE box. NUMBER OF COATS. Enter the number of coats of paint you think you will require.

Is it expensive to buy paint?

Paint can be very expensive to buy especially if you are using one of good quality. You will need to have an idea of how much paint you must buy when you are at the project planning stage. When buying paint it is always a good idea to purchase all the paint you need at the same time and from the same production batch.

Can you paint plaster with emulsion paint?

Don’t forget that you will be painting the plaster surfaces (walls and ceilings) with a water based emulsion paint and usually the ceiling will be a different colour to the walls. The emulsion paint can be ordinary finish or can have a vinyl finish which allows the surface to be washable.

Can you use a roller to paint walls?

A quick and easy way to apply emulsion paint onto walls and ceilings. The main advantage of using a roller is the rapid coverage you can achieve. Cost of labour. If the painting job is to be a DIY project then the cost of labour will be however much your own time is worth.

Can you use paint solvent to clean your hands?

You need something other than paint solvent to clean paint from your hands. Although solvent will do the job, it will not help the condition of your skin. Repeated use of paint solvent as a hand cleaner has been shown to cause eczema and other skin problems. Paint buckets (also known as paint kettles).

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9