What is the Ooma HD3 handset?
Building upon the highlights of the first and second generations of the Ooma HD1 Handset, the Ooma HD3 Handset is a cordless phone that integrates with your Ooma Telo Base Station or Phone Genie quickly and easily. With this companion device, you can link your whole house up to Ooma without any wires or hassle.
How can I prevent interference with my Ooma Telo and Ooma HD3 handset?
• Try moving your Ooma Telo and Ooma HD3 Handset away from devices that may generate interference, including: computers, wireless devices and electrical appliances (such as microwaves).
How do I dispose of the batteries of the Ooma HD3 handset?
• Remove the batteries from the Ooma HD3 Handset before shipping or storing the product. • Do not throw your old batteries in the trash. Please call 1-800-8-BATTERY (1-800-822-8837), they will provide you with the address of the recycling center nearest to you.
Can I report a gas leak on the Ooma HD3 handset?
• Do not use the Ooma HD3 Handset to report a gas leak in the vicinity of the leak as it could ignite the gas.
How do I use Ooma handset?
You use a regular phone connected to the PHONE port of the Ooma Telo Base Station to call individual Ooma HD2 Handsets by dialing *01 for the first handset, *02 for the second, and so on for each handset in your home. The Ooma HD2 Handsets are assigned numbers based on the order in which they were activated.
What do the Ooma lights mean?
Solid blue light. Base Station is online and in service. Rapidly-blinking blue light. Base Station is in registration mode. Solid amber light.
How do I register my Ooma HD3?
Press the Page key on your Ooma Telo and hold it down for three seconds to activate registration mode. When the handset detects the Telo, press the YES soft key to proceed. Once the handset is successfully registered, the home screen will be displayed. Each Ooma Telo supports up to four Ooma HD3 Handsets.
What is the flash button on Ooma phone?
Analog phone Press the phone's flash button to put the active call on hold and answer the incoming call.
Why does Ooma blink red?
If the device has functioned in the past, the flashing red logo usually means that an interruption in your Internet service may have broken the device's connection to Ooma servers. Verify that your Internet connection is functioning properly.
Why is Ooma flashing purple?
Blinking Purple System Status Indicates your Ooma Telo is downloading a software upgrade. All services are unavailable. Do not unplug your Ooma Telo when it is in this state.
How does Ooma work with multiple phones?
Important: If both phone lines are wired into a single physical jack in each room, (meaning that you don't have two phone jacks, one for line 1 and one for line 2), you must use a two-line splitter to connect your Ooma Telo Base Station or Phone Genie to the second line.
How do I set up Ooma Wireless?
How do I set up my Ooma Wireless Adapter?Plug the Adapter into the USB port on the back of your Telo Base Station or Phone Genie.Using an Ethernet cable, connect the HOME NETWORK port on the back of your Telo Base Station or Phone Genie to a computer.Use the computer and open up a browser to setup.ooma.com.More items...
What is Page key on Ooma base unit?
Volume Adjustment Key Press to adjust the volume level. Page Key (on rear of Base Station) Press to locate your Ooma handsets. Press-and-hold for three seconds to register a new cordless Ooma device such as an HD2 Handset or Linx. Volume. Solid Blue System Status Indicates that your Ooma service is working.
Why is my Ooma solid red?
Solid red logo likely means a hardware failure.
How do I change my Ooma dial tone?
Click on the small blue 'cog' on your device & select 'edit'. Change 'dial tone' from pull-down.
How do I put my phone on hold?
0:361:21Samsung Galaxy - How To Place Calls On Hold - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd is super easy to do when you're on a call tap the hold call button with a pause icon. The personMoreAnd is super easy to do when you're on a call tap the hold call button with a pause icon. The person on the other end will hear a message saying you have been placed on hold please wait.
How many Oooma HD3 handsets can I use?
Each Ooma Telo Base Station or Phone Genie can support up to four Ooma HD3 Handsets in addition to a regular phone plugged into the PHONE port in the back of the Ooma Telo Base Station or Phone Genie.
What is base phone on Oooma?
Base phone: This is the phone connected to the PHONE port of your Ooma device. When the phone is picked up, an intercom call will connect between the two phones. If you have a multi-handset phone with the base station plugged into the PHONE port of your Ooma device, all of the satellite phones will ring as well.
How to enable speakerphone?
There are several ways that you can enable the speakerphone: By pressing the speakerphone key at any time during a call. By entering the phone number and pressing the speakerphone key instead of connecting the call with the answer key. By answering a call with the speakerphone key instead of the answer key.
How to keep ears open on a Samsung phone?
You can keep your ears open from a distance by using the baby monitor feature. In order to enable this feature, you can follow these directions: Press the Menu key and navigate to the intercom submenu on the receiver phone. Select the phone you wish to listen/monitor, and press the “Monitor” soft key.
How to add phone number to phonebook?
Scroll down until you’ve highlighted the phone number you’d like to add. Press the “Options” soft key. Select “Add to phonebook” to add the number.
Product description
Make cordless voice calls over the Ooma VoIP phone service with the HD3 Handset from Ooma. Equipped with a 2" color display, the cordless HD3 Handset supports wideband HD Voice technology, which is designed to deliver double the audio quality of typical narrowband calls.
Upload User Manual
Have you got an user manual for the Ooma HD3 Handset in electronic form? Please send it to us and help us expand our library of instruction manuals. Thank you, too, on behalf of other users.
Discussion
Ask our technicians if you have a problem with your settings, or if anything is unclear in the user manual you have downloaded. You can make use of our moderated discussion. The discussion is public and helps other users of our website who may be encountering similar problems.
Naming HD3 phones
Having trouble placing or receiving calls or using your voicemail system on Ooma Telo VoIP Phones? Post your questions here.
Re: Naming HD3 phones
I found by powering off / on the Telo the name will show up in the HD3 screens. Paul
Re: Naming HD3 phones
Handsets communicate with the Telo about every 10-15 minutes.