How to reset an OnGuard lock?
How to Reset an Onguard Lock. 1 Step 1. Arrange the dials to your current or pre-set four-digit combination. Check that that the numbers are aligned with the guide points beside the ... 2 Step 2. 3 Step 3. 4 Step 4. 5 Step 5. More items
Why OnGuard locks?
A lock is only as good as it’s weakest link. And where some locks secure only one side of the shackle, OnGuard’s patented mechanisms secure both sides for a double-redundant system that resists attack from pulling, jacking and prying. Key registration, lock registration, and direct customer support for our entire lock family.
How do I know if OnGuard is connected to the server?
When the server is NOT connected, the OnGuard logo will disappear (note first image below). When the server is connected and working properly, the OnGuard logo will be in full color as shown in the second image below. The user profile can be set by either the Command Portal or on the handheld device itself.
How do I enable beacons on OnGuard?
NOTE: To use Beacon locations, Bluetooth must be turned on in Android system settings. “Enable Beacons” must be enabled in OnGuard settings. Android Lollipop or higher is required to write beacons. OnGuard beacons makes it easy to create a high accuracy indoor location system for buildings or underground structures where GPS will not work.
How do you unlock the OnGuard combination lock?
0:011:00OnGuard Lock Combination Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe dial back counterclockwise. Until it comes to a full stop. Your. Number is still the number youMoreThe dial back counterclockwise. Until it comes to a full stop. Your. Number is still the number you just set at zero zero zero. Four and you are able to now insert the key all the way.
How do I open my OnGuard bike lock with the key?
Insert the key until it comes to a stop, turn the key clockwise and pull out the shackle. NEVER use force when turning the key. NEVER use bent or damaged keys. Remember to close the cylinder protector.
What do you do if you forget your bike lock combination?
1:162:12How To Unlock Cable Bike Lock Without Combination - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd there's resistance now on this first dial so go ahead rotate. This first dial ah. And rightMoreAnd there's resistance now on this first dial so go ahead rotate. This first dial ah. And right there. So I got that. And let me see. And write those combination.
How do you unlock a master lock without the code?
0:045:59How to Crack Your Master Lock Combo in 3 Easy Steps - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo you what you want to do is you want to put your pointer finger up here. And you want to applyMoreSo you what you want to do is you want to put your pointer finger up here. And you want to apply some pressure. So you want to pull this up and rotate this master lock.
What are OnGuard keys used for?
OnGuard is a brand of high-end bike locks common in the UK, USA and throughout the world. Their range of products typically uses laser keys, especially their chain locks and U-locks.
How do you reset a 4 digit combination lock if you forgot the code?
Use the reset tool that came with the combination lock if you have it. Most locks come with reset tools, although many bike locks do not. If you don't have the reset tool, you may be able to get it from the manufacturer. If you have the reset tool, push it into the hole on the side of the lock chamber.
How do you reset a 4 digit lock?
0:001:16Reset the 4 Digit Master Lock Code - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo now what you'll do is open it up and turn it what is that ninety degrees. And push it down andMoreSo now what you'll do is open it up and turn it what is that ninety degrees. And push it down and you'll see there's a tiny little piece of metal. There. You if you're able to push that down.
How do you reset a 3 digit combination lock?
Pull up on the shackle to open the lock. Turn the shackle 90° so that the metal tab lines up with the groove facing the front of the lock. Push the shackle downwards and, while pushing down, turn the numbers until you have your desired combination. After the combination is set, stop pushing down on the shackle.
What is the encoding for Onguard?
The type of file is a comma separated values (CSV) file. Encoding is UTF-8, which is typically the default encoding.
How to enter panic mode on Onguard?
To enter Panic mode, open the OnGuard app and tap the Panic (exclamation) icon as shown below, then let the timer expire or tap ‘Send Now’ to immediately launch the Panic Alert.
How does Onguard work?
The OnGuard System is comprised of two main components: 1 A Web-based User Interface (Command Portal) application used to set up, monitor and manage all participants in the system. 2 A Client application (OnGuard app) that is downloaded to the smartphone of participants
How to remove user from Onguard?
Click the trash can icon. Check the checkbox beside the user to be removed. If you want to move this user to another group click ‘REMOVE FROM GROUP’. If you want to completely remove this user from the OnGuard system, click ‘DELETE’.
What is the Onguard Command Portal?
The OnGuard Command Portal is comprised of the three main sections. From left to right: “Tabs” separate individual views into distinct areas, “Active View” shows current status of participants ; “Map” shows the location of participants.
Where are Onguard beacons placed?
Our Bluetooth beacons are placed at various locations in the building 15-30 meters apart, depending on walls.
What is an external user?
Fill in user information and select user type. An External User is someone who will not log into the system but can be used as an emergency contact for a company. This user will receive email only alerts automatically through the system.