How to reset an OnGuard bike lock?
How to Reset an Onguard Lock Arrange the dials to your current or pre-set four-digit combination. Press the “Open” button and pull the Onguard lock shackle to the open position. Rotate the reset wheel, on the side of the lock, clockwise until it stops. Use the dials to input a new four-digit combination.
How to find your forgotten bike lock combination?
- Jolting of the lock
- Falling of the wheel into a gate, which makes moving on to the next number relatively difficult
- Inability to move to another digit
How do I Reset my combination bike lock?
Method 2 Method 2 of 4: Changing a Speed Dial Lock
- Open the lock using the old combination. Squeeze down on the shackle twice before entering the combination.
- Use a pen or pencil to flip on the reset lever. The reset switch is located on the back of the lock.
- Squeeze down the shackle twice. ...
- Enter a new combination by pushing the dial up, down, right, or left. ...
How to reset a 5 digit combination bike lock?
is too short. Check the lock before leaving the bike to make sure it is secured. EZ RESET – To set your own personal combination: 1. Unlock the lock using the factory set combination of “----“ 2. Pull the cable out from the lock housing. 3. To free up the number dials, flip the small reset lever up 180º until it is flat against the lock head (Fig. A).
Where is the combination on a OnGuard bike lock?
0:011:00OnGuard Lock Combination Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe dial back counterclockwise. Until it comes to a full stop. Your. Number is still the number youMoreThe dial back counterclockwise. Until it comes to a full stop. Your. Number is still the number you just set at zero zero zero. Four and you are able to now insert the key all the way.
How do you unlock a bike lock if you forgot the combination?
1:162:12How To Unlock Cable Bike Lock Without Combination - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd there's resistance now on this first dial so go ahead rotate. This first dial ah. And rightMoreAnd there's resistance now on this first dial so go ahead rotate. This first dial ah. And right there.
How do I open my OnGuard lock?
1:195:19(1348) OnGuard Bulldog ATB 8011 Bicycle U-Lock Picked - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo let's try it. So have you tension. And what will happen is it. I have always used gentle tensionMoreSo let's try it. So have you tension. And what will happen is it. I have always used gentle tension on locks I found them with heavy tension on these sliders. It makes them bind.
How do I reset my bike lock guard?
0:090:52How To Set a BikeGuard Flexi-Combo DLXYouTubeStart of suggested clipEnd of suggested clipThis is how to set the combination. All bike garden locks are set to all the zeros. That's how youMoreThis is how to set the combination. All bike garden locks are set to all the zeros. That's how you open it. And then through your middle piece here you push that in.
How do you reset a 4 digit combination lock if you forgot the code?
0:285:33How to Crack the Code & Open a Combination Padlock - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd is the same procedure. Keep some tension on the shackle and rotate to the dial until we feel aMoreAnd is the same procedure. Keep some tension on the shackle and rotate to the dial until we feel a change this time number eight feels a lot looser.
How do you break a 4 digit bike lock?
1:193:39Cracking a combination lock - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll you have to do is pull on the two ends. Not even very hard just to put some pressure in theMoreAll you have to do is pull on the two ends. Not even very hard just to put some pressure in the chamber. And then starting with the number wheel at the open. End just go through one by one.
Are OnGuard locks good?
OnGuard Bulldog DT Review Summary The frame mount is reasonably good quality and generally dependable. But the customer service you get from OnGuard is nothing like as good as from Kryptonite. They will not replace your lock if your keys get stuck and the conditions of their anti-theft protection are much stricter.21-Feb-2015
How do you fix a stuck bike lock?
So the first job is to loosen them with some WD-40! Hold the lock so the key hole is facing the floor and squirt WD-40 into the hole. This should dislodge any street gunk and allow it to drain out of the locking mechanism. Then turn the bike lock around so the hole is facing the upwards and insert the key.
What are OnGuard keys used for?
0:173:01(35) Lock Picking: OnGuard Laser-Cut Key lock SPP'd - YouTubeYouTubeStart of suggested clipEnd of suggested clipWay these keys work is instead of the standard pin and tumbler where there's hill hills and valleysMoreWay these keys work is instead of the standard pin and tumbler where there's hill hills and valleys on one or more edges of the keys.
Special offers and product promotions
Create your FREE Amazon Business account to save up to 10% with Business-only prices and free shipping. Register today
Product Description
OnGuard - Bulldog Combo DT (U-Lock w/ 4cinch loop cable)Convenience and security of Bull Dog Combo STD with included 4 foot fully coated, braided steel cable for more locking options.
Product details
There was a problem filtering reviews right now. Please try again later.