- Default OnGuard digit combination is 0005
- Pull the lock open
- Notice on the anchor there is a ring with an arrow, which rotates clockwise
- Rotate lock clockwise until it comes to a stop. This step locks up the internal mechanism and allows you to change the outer dials to whatever combination you like
- After you have changed the combination to a number you like rotate the inner dial counter-clockwise until it reaches a stop
- Your new combo is now set and your OnGuard combination bike lock is ready for use!
Are OnGuard bike locks any good?
OnGuard’s locks are hard to beat when you consider the quality of lock you receive for the price you pay. The OnGuard Pitbull is one of the cheapest Sold Secure Diamond bike locks on the market and is a worthy investment for anyone on a tighter budget.
How to reset an OnGuard lock?
How to Reset an Onguard Lock. 1 Step 1. Arrange the dials to your current or pre-set four-digit combination. Check that that the numbers are aligned with the guide points beside the ... 2 Step 2. 3 Step 3. 4 Step 4. 5 Step 5. More items
How do I open the OnGuard lock shackle?
Arrange the dials to your current or pre-set four-digit combination. Check that that the numbers are aligned with the guide points beside the dials. Press the "Open" button and pull the Onguard lock shackle to the open position.
Should I buy the OnGuard Pitbull bike lock?
For the money you pay, you’ll receive a bike lock with features that you’d only expect to find on a more upmarket lock. OnGuard do produce a more secure D Lock, so if you’ve spent a fair amount of money on your ride, check the Pitbull’s big (but still affordable) brother, the OnGuard Brute.
What do you do if you forget your bike lock combination?
1:162:12How To Unlock Cable Bike Lock Without Combination - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd there's resistance now on this first dial so go ahead rotate. This first dial ah. And rightMoreAnd there's resistance now on this first dial so go ahead rotate. This first dial ah. And right there. So I got that. And let me see. And write those combination.
How do you open a bike lock that won't open?
If your key has got stuck in the key hole and you can't get it out, then the solution is the same as above: plenty of WD-40 in between gently trying to turn the key back and forth. Spraying a load of WD-40 into the hole and then leaving it to do it's business for 5 or 10 minutes can work wonders.
How do you crack a combination OnGuard lock?
1:193:39Cracking a combination lock - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll you have to do is pull on the two ends. Not even very hard just to put some pressure in theMoreAll you have to do is pull on the two ends. Not even very hard just to put some pressure in the chamber. And then starting with the number wheel at the open. End just go through one by one.
What is an OnGuard key for?
OnGuard is a brand of high-end bike locks common in the UK, USA and throughout the world. Their range of products typically uses laser keys, especially their chain locks and U-locks.
What do you do when your lock won't open?
Key is stuck Grip the key firmly and with your other hand push around the keyhole. If you can't get a good grip try using pliers, but remember to be gentle to avoid damaging the lock. If the key won't come out then you will need to call a professional locksmith to remove it without damaging your lock and door.
How do I open my bike lock?
Here is how to open a bike lock with decoding:Pull outward on the shackle or on the cable. ... Move each wheel.Feel for any of the wheels that are starting to bind. ... Move the binding wheel(s) one number or letter at a time.More items...•
How do you reset a 4 digit combination lock if you forgot the code?
0:001:16Reset the 4 Digit Master Lock Code - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo now what you'll do is open it up and turn it what is that ninety degrees. And push it down andMoreSo now what you'll do is open it up and turn it what is that ninety degrees. And push it down and you'll see there's a tiny little piece of metal. There. You if you're able to push that down.
How do you reset a 4 digit combination bike lock?
0:001:25Reset Combo on a New Bike Lock Cable with LED Light - YouTubeYouTubeStart of suggested clipEnd of suggested clipOn the inside there should be a dial with the word set stamped on it to change the combination andMoreOn the inside there should be a dial with the word set stamped on it to change the combination and rotate the dial about a quarter turn and into the set mode.
Are OnGuard locks good?
On the inside, OnGuard locks earn the highest safety ratings with double and quad-locking mechanisms, bump-resistant cylinders, and hardened steel shackles and chains.
What is key registration?
Definition(s): A function in the lifecycle of a cryptographic key; the process of officially recording the keying material by a registration authority.
What is the default code for an OnGuard bike lock?
Your Onguard lock can only be reset if you know the current combination. If you haven't changed it from the original factory setting, the code would be 0005. Once open, you will see on the side with the numbers a little wheel that says set.
Are OnGuard locks good?
If you're looking for great security at the lowest price, go for OnGuard. However, don't expect the highest build quality or the greatest level of customer service. And if you're looking for good all round performance and fantastic after sales customer service go for Kryptonite. So that's Abus vs Kryptonite vs OnGuard!
How to open Onguard lock?
Press the "Open" button and pull the Onguard lock shackle to the open position.
What is an Onguard lock?
A proper lock can guard against theft and serve as a visual deterrent for would-be thieves. Onguard combination locks allow you to set your own combination. This feature offers you the advantage of selecting a personal combination, and changing that combination as many times as needed or desired. Advertisement.
How to lock a bicycle?
Always lock your bicycle through the frame and the front wheel. If possible, remove the front wheel and place it beside the rear wheel. Then, pass the lock through both wheels as well as the frame.
How to stop a reset wheel?
Rotate the reset wheel counterclockwise until it stops.
How Does the Onguard Pitbull 8005 Compare to Other Bike Locks?
The U17’s locking mechanism does operate more smoothly, but it lacks the silicone covering and doesn’t feel quite as sturdy.
What is the best bike lock?
The OnGuard Pitbull is one of the best budget bike locks on the market. For the money you pay, you’ll receive a bike lock with features that you’d only expect to find on a more upmarket lock.
How Secure Is the OnGuard Pitbull DT 8005?
As previously mentioned, the OnGuard Pitbull has many features that one would only expect to find on a more premium bike lock. Many of these features greatly increase the Pitbull’s security.
How Practical Is the OnGuard Pitbull 8005?
Weighing in at 3.55 lb (1.61 kg) the OnGuard Pitbull is slightly heavier than your average D Lock. Had OnGuard spent more time refining the Pitbull’s features it could possibly have been lighter, but it’s likely it would then cost you more to purchase!
How much heavier is the Onguard Pitbull than the Zefal K-Traz U17?
The OnGuard Pitbull is 5oz (150g) heavier than the Zefal K-Traz U17, which is almost exactly the same lock, but doesn't have the same Sold Secure Diamond rating.
What is the Onguard rating on a Pitbull?
Many of these features greatly increase the Pitbull’s security. OnGuard rated the Pitbull at 83/100 on their website, which places the Pitbull in their ‘Ultimate Security’ Category.
Is a Pitbull bike lock good?
As with any budget bike lock, operating the Pitbull is not always seamless and basic maintenance is advised to keep the Pitbull in good, working condition. However, for the price you pay it’s easy to see past the Pitbull’s small imperfections.
Step 1: Understand What's Inside
inside there are four rotating plates with a notch the shackle to slide through. When you scramble the lock, the plates slide to block the shackle from coming out.
Step 2: Tension the Lock
I wrapped the lock around a chair (pictured) sliding the cables apart increases tension in the system. you need tension to press the teeth of the shackle against the lock discs. this lets you feel the shape of the discs better and decide when one of the teeth isn't pressed against steel disc and is just hanging out in open air.
Step 3: Rotate the Tumblers
Start with the tumblers that are hardest to rotate first. these have the most tension. tension makes the disc's shapes easier to determine. Now, there's a couple of things to look for.
Step 4: Have Nerves of Steel
When you get it, you'll be concentrating hard and i can guarantee the lock will fly apart. Its going to startle you. Don't make this remove the idea of setting the combo to something you'll remember from your head.