- Default OnGuard digit combination is 0005
- Pull the lock open
- Notice on the anchor there is a ring with an arrow, which rotates clockwise
- Rotate lock clockwise until it comes to a stop. This step locks up the internal mechanism and allows you to change the outer dials to whatever combination you like
- After you have changed the combination to a number you like rotate the inner dial counter-clockwise until it reaches a stop
- Your new combo is now set and your OnGuard combination bike lock is ready for use!
How to reset an OnGuard bike lock?
How to Reset an Onguard Lock Arrange the dials to your current or pre-set four-digit combination. Press the “Open” button and pull the Onguard lock shackle to the open position. Rotate the reset wheel, on the side of the lock, clockwise until it stops. Use the dials to input a new four-digit combination.
How to find your forgotten bike lock combination?
- Jolting of the lock
- Falling of the wheel into a gate, which makes moving on to the next number relatively difficult
- Inability to move to another digit
How do I Reset my combination bike lock?
Method 2 Method 2 of 4: Changing a Speed Dial Lock
- Open the lock using the old combination. Squeeze down on the shackle twice before entering the combination.
- Use a pen or pencil to flip on the reset lever. The reset switch is located on the back of the lock.
- Squeeze down the shackle twice. ...
- Enter a new combination by pushing the dial up, down, right, or left. ...
How to reset a 5 digit combination bike lock?
is too short. Check the lock before leaving the bike to make sure it is secured. EZ RESET – To set your own personal combination: 1. Unlock the lock using the factory set combination of “----“ 2. Pull the cable out from the lock housing. 3. To free up the number dials, flip the small reset lever up 180º until it is flat against the lock head (Fig. A).
How do you unlock a bike lock if you forgot the combination?
1:162:12How To Unlock Cable Bike Lock Without Combination - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd let me see. And write those combination. Seven five nine eight and that's how you open one ofMoreAnd let me see. And write those combination. Seven five nine eight and that's how you open one of these combination locks.
How do you reset the code on a onguard bike lock?
0:010:59OnGuard Lock Combination Tutorial - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe dial back counterclockwise. Until it comes to a full stop. Your. Number is still the number youMoreThe dial back counterclockwise. Until it comes to a full stop. Your. Number is still the number you just set at zero zero zero. Four and you are able to now insert the key all the way.
How do you crack a combination on guard lock?
1:193:39Cracking a combination lock - YouTubeYouTubeStart of suggested clipEnd of suggested clipAll you have to do is pull on the two ends. Not even very hard just to put some pressure in theMoreAll you have to do is pull on the two ends. Not even very hard just to put some pressure in the chamber. And then starting with the number wheel at the open. End just go through one by one.
How do you reset a 4 digit combination lock if you forgot the code?
0:001:16Reset the 4 Digit Master Lock Code - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo now what you'll do is open it up and turn it what is that ninety degrees. And push it down andMoreSo now what you'll do is open it up and turn it what is that ninety degrees. And push it down and you'll see there's a tiny little piece of metal. There. You if you're able to push that down.
What is the default code for an OnGuard bike lock?
Your Onguard lock can only be reset if you know the current combination. If you haven't changed it from the original factory setting, the code would be 0005. Once open, you will see on the side with the numbers a little wheel that says set.
How do you open the OnGuard bike lock?
Open the lock by aligning the preset combination number to the guide point and pull out the lock post. Turn the reset collar clockwise until it comes to a stop. Select your new combination by rotating the dials (for example: 1234). Be sure to write it down and keep it in a safe place.
How do you unlock a 3 digit lock?
2:233:56How to Reset the Combination to a 3 Digit Master Lock - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd try to push it down it won't push down you really need it to be at the combination. Before youMoreAnd try to push it down it won't push down you really need it to be at the combination. Before you lock it. And then you basically change the combination. And then it's locked.
What are OnGuard keys used for?
OnGuard is a brand of high-end bike locks common in the UK, USA and throughout the world. Their range of products typically uses laser keys, especially their chain locks and U-locks.
How do you unlock a 5 digit combination lock without the code?
2:245:50(849) How to Pick 5-Digit Combo Locks - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo let's just go one number at a time I get my fingernail in there. And you just keep rotating untilMoreSo let's just go one number at a time I get my fingernail in there. And you just keep rotating until you feel that shackle fall into the gate. And it just did I don't know if you saw that.
How many combinations does a 4 digit lock have?
10,000 possible combinationsThere are 10,000 possible combinations that the digits 0-9 can be arranged into to form a four-digit code.
Step 1: Understand What's Inside
inside there are four rotating plates with a notch the shackle to slide through. When you scramble the lock, the plates slide to block the shackle from coming out.
Step 2: Tension the Lock
I wrapped the lock around a chair (pictured) sliding the cables apart increases tension in the system. you need tension to press the teeth of the shackle against the lock discs. this lets you feel the shape of the discs better and decide when one of the teeth isn't pressed against steel disc and is just hanging out in open air.
Step 3: Rotate the Tumblers
Start with the tumblers that are hardest to rotate first. these have the most tension. tension makes the disc's shapes easier to determine. Now, there's a couple of things to look for.
Step 4: Have Nerves of Steel
When you get it, you'll be concentrating hard and i can guarantee the lock will fly apart. Its going to startle you. Don't make this remove the idea of setting the combo to something you'll remember from your head.