Models LT1042 and LT1045 take oil filter 25-050-25-S, while models LT1046 and LT1050 require oil filter 12-050-01-S. Though the filter is different for these models, the installation process is the same. As with all its models, Cub Cadet recommends changing the engine oil every 100 hours of use.
Full Answer
What kind of engine does a Cub Cadet lt42 have?
The Cub Cadet XT1 LT42 lawn tractor used Kohler SV541 engine. It is a 0.6 L, 596 cm 2, (36.4 cu·in) single-cylinder gasoline engine with 94.0 mm (3.7 in) of cylinder bore and 86.0 mm (3.39 in) of piston stroke.
What kind of engine does a Cub Cadet XT1 have?
The Cub Cadet XT1 LT42 is a 2WD lawn tractor from the XT1 Enduro Series. This tractor has been manufactured by the Cub Cadet (a part of MTD) since 2015. The Cub Cadet XT1 LT42 is equipped with 0.6 L single-cylinder Kohler SV541 gasoline engine and Tuff Torq K46 belt-driven hydrostatic transmission with infinite forward and reverse gears.
How do I contact the Cub Cadet dealer?
FINANCING HOW-TO ARTICLES TRACK ORDER FIND MODEL/SERIAL NUMBER MANUALS ONLINE DEALER LOCATOR COMMERCE PARTS PAGE Call Us: 1-877-428-2349 Business Hours Monday - Friday 8:30AM - 5:00PM EDT Related Articles Cub Cadet Hydrostatic Transmission Oil Number of Views78.45K Cub Cadet Extended Warranty Number of Views9.93K
What oil does Cub Cadet use?
Cub Cadet lawn mowers use SAE30 motor oil. The Cub Cadet lawn mower is available in electric and self-propelled electric models. Lawn mowers require both gasoline fuel and motor oil in order to operate.
How much oil does a lt42 Cub Cadet take?
two quartsIncludes two quarts of Premium SAE 10W-30 Oil, one Kohler® Oil Filter and a reusable easy-drain oil pan.
What kind of oil does a Cub Cadet snowblower take?
SAE 5W-30SAE 5W-30 Engine Oil - 28 oz.
How do you change the oil on a Cub Cadet lt42?
0:341:39How to Change the Oil on XT Enduro Series Riding Mowers - YouTubeYouTubeStart of suggested clipEnd of suggested clipUse a filter wrench to remove the old. Filter. Put a small amount of fresh oil around the seal ofMoreUse a filter wrench to remove the old. Filter. Put a small amount of fresh oil around the seal of the new filter then screw in the new filter.
Is 10w30 the same as SAE 30?
You can use 10w30 instead of SAE 30 in your lawn mower if you want. Since 10w30 has the same viscosity grade at operating temperature, you won't run into any problems by using it instead of SAE 30.
Can I use 5w30 instead of 10w30?
According to API motor oil guide [1], If you are using 10W–30, you can safely switch to 5W–30 (in car engines). 5W–30 is thinner than 10W–30 when cold. (you must follow the manufacturer's recommendations). However, switching from 5W–30 to economical 10W–30 is not always recommended.
Is SAE 30 the same as 5w30?
To be clear, SAE 30 and 5w30 are not the same. SAE 30 is a single-grade oil meaning it is only rated one time at a very high temperature. This high-temperature rating is right in the middle at 30. 5w30 on the other hand, is a multi-grade oil that has two ratings.
How much oil does my Cub Cadet snowblower need?
A: It takes 20 ounces of oil. I use a Full synthetic oil 10w30.
What is 5W 30 motor oil used for?
5W-30 oil is primarily a winter viscosity grade motor oil. While it does perform adequately at a higher temperature, its best use is for people who drive in cold temperature regions. Due to its lower viscosity, it's typically recommended for petrol vehicles or a light-duty diesel engine.
How often should I change the oil in my Cub Cadet riding mower?
Change your engine oil after every 50 hours of use and prior to placing your Cub Cadet riding mower in storage. You must perform your initial oil change on a new engine after the first 5 hours of use.
Can I use synthetic oil in my Cub Cadet?
It is fine to use synthetic oil if the engine manufacturer's change intervals are followed. In air cooled engines, if not changed on time, the syn. oil will lose the lubricating properties and gel up badly.
What kind of oil does a Kohler 7000 take?
Kohler recommends 10W-30 oil for its engines, including Command, Command Pro, CS, Courage, Aegis and Triad OHC engines, when the piece of equipment is in an environment where the temperature is above 32 degrees F. For K-Series and Magnum engines, use SAE 30 oil for temperatures above 32 degrees F.