Use the nylon line cutter and remove the line. Place the opposing ends of the fuel lines into the block’s threaded side first. Allow 1/4 in to protrude. Place a small amount of oil on the tapered connector and place the connector end in one side of the fuel line.
Full Answer
What is a nylon fuel line repair kit?
Dorman's Nylon Fuel Line Repair Kit includes all the professional, quality-made tools and parts you need to get fuel line repairs done quickly and efficiently. Kit features professional- quality tool with ergonomic clamp-type grip Innovative clamp-block design makes joining nylon to nylon barbed fittings easy
Do all new cars have nylon fuel lines?
Pretty ingenious method I found tonight while doing some research on Nylon fuel lines. All new cars have this type of fuel line and fittings I've been told. Saves you the $100 on the Dorman Nylon compression tool.
Do all new cars have fuel lines with 90* fittings?
All new cars have this type of fuel line and fittings I've been told. Saves you the $100 on the Dorman Nylon compression tool. However, I'm not sure how it will work out with 90* fittings.
Can you repair a nylon fuel line?
Nylon lines tend to break near the fuel filter due to the twisting and force necessary to remove it. Regardless of the placement of the break, a nylon repair tool is necessary to repair the line. Mostly all auto parts stores sell a repair kit capable of repairing any size nylon line.
How do you crimp a nylon fuel line?
2:354:24BEST ways to repair dorman nylon plastic fuel line tubing - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow that the hose is on you want to put the hose clamp on and then take a pair of flush. Cut pliers.MoreNow that the hose is on you want to put the hose clamp on and then take a pair of flush. Cut pliers. And crimp it on tightly.
How do you splice a plastic fuel line?
1:5914:50Gasoline Leak? Easy DIY Nylon Fuel Line Repair - YouTubeYouTubeStart of suggested clipEnd of suggested clipAlso by Dorman these nylon fuel line press fittings these are for 3/8 fuel line and it's simply aMoreAlso by Dorman these nylon fuel line press fittings these are for 3/8 fuel line and it's simply a matter these unions are just simply a matter of pressing. The two pieces together one into each end so
Will nylon fittings work with gasoline?
NYLON FITTINGS Nylon is resistant to a broad range of chemicals including most agricultural chemicals, ammonium compounds, detergents, diesel fuel, ethanol, gasoline, hexane, magnesium sulphate, most sodium compounds, trichloroethylene, and zinc sulphate.
Where to seat caulk gun clamp?
Now seat the clamp in the far end of the caulk gun as shown. Be mindful of the tubing past the clamp. Don’t let it get any pressure on it and get kinked.
How to squeeze the handle of a caulk gun?
Move the plunger forward in the gun until there’s just enough room for the fitting between the plunger and the tubing. Align the fitting with the end of the tubing and hold them in alignment with your fingers while you start to squeeze the handle of the caulk gun.
Do all new cars have fuel lines?
All new cars have this type of fuel line and fittings I've been told.
Do Dorman tools leave markings on tubing?
FYI also the Dorman tool (that I have and I use sometimes in my shop) leave the marking outside the tubing, as you say in post #2.
Where do Asshat cut fuel lines?
Some asshat cut the nylon fuel lines right next to the disconnects where the lines come from the car and meet the engine, when they pulled the motor.
How to flare brake line?
Get a 45 degree brake line flare tool. Just get the clamp part that holds the steel line. Get a caulk gun. BUT, get one that is open on both sides. Most of the cheap ones are half closed and you slip the caulk in, but I had some that basically just have 2 straps...one on each side of the caulk tube. No caulk in the caulk gun, clamp the nylon line in the brake line clamp...just short of how long the barbs are. It will take some wrangling, but get the end of the caulk gun lined up with the fitting and just press it in.