nylon fuel line quick connectors

by Jordan Goyette Published 4 years ago Updated 2 years ago

SAE 6.30 Nylon Fuel Line Quick Connector

Parts	Material	Supplier	Supplier	Application
Body	PA12 GF30	ARKEMA	EVONIK	Fuel
	PA66 GF30/35	BASF	DUPONT	Fuel Steam
	PA6/6T GF25	BASF		HT Fuel
	PA9T GF30	KURARAY		HT Fuel

6 more rows ...

Apr 3 2022

Full Answer

What size is a fuel line quick connector?

Fuel Line Quick Connector That Adapts 3/8 In. Steel To 3/8 In. Nylon Tubing Replace only the damaged connectors instead of the entire fuel line with these direct-replacement fuel line connectors. Designed for easy installation and a precise fit, they are engineered to withstand extreme underhood conditions.

What is a direct replacement fuel line connector?

Replace only the damaged connectors instead of the entire fuel line with these direct-replacement fuel line connectors. Designed for easy installation and a precise fit, they are engineered to withstand extreme underhood conditions.

Why choose our quick connect fittings?

Innovative, secure and quick, Our quick connect fittings made of synthetic material are suitable for most media carrying lines . Be it fuel , oil vapor , water cooling and air carrying lines . We offer the idea means of connection .

What kind of fuel line connector does Dorman use?

Nylon Tubing | Dorman Products 800-086: Fuel Line Quick Connector That Adapts 3/8 In. Steel To 3/8 In. Nylon Tubing Fuel Line Quick Connector That Adapts 3/8 In. Steel To 3/8 In. Nylon Tubing Replace only the damaged connectors instead of the entire fuel line with these direct-replacement fuel line connectors.

How do you attach nylon fuel line?

2:544:24BEST ways to repair dorman nylon plastic fuel line tubing - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow that the hose is on you want to put the hose clamp on and then take a pair of flush. Cut pliers.MoreNow that the hose is on you want to put the hose clamp on and then take a pair of flush. Cut pliers. And crimp it on tightly.

Will nylon fittings work with gasoline?

NYLON FITTINGS Nylon is resistant to a broad range of chemicals including most agricultural chemicals, ammonium compounds, detergents, diesel fuel, ethanol, gasoline, hexane, magnesium sulphate, most sodium compounds, trichloroethylene, and zinc sulphate.

How do I connect fuel line to Quick Connect?

2:0912:37How to Disconnect Common Quick Connect Fittings - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo that's how this is a quick-connect. So when you push the line at that side at an angle. It willMoreSo that's how this is a quick-connect. So when you push the line at that side at an angle. It will push that yellow piece out of the way and as soon as the line gets past it it'll back into place.

Can nylon tubing be used for fuel line?

Nylon fuel line. Many late-model production cars are now using hard, black nylon tubing with special connectors to attach fuel-feed lines to the gas tank sending unit/fuel pump modules. This gas-resistant nylon tubing can be purchased by the foot or in short sections with the proper ends already attached to one end.

Can you replace steel fuel lines with nylon?

One option for replacing metal fuel lines is with a nylon tubing and specific fittings. Nylon tubing can be used for an entire length of fuel line or just a section. This option can be a cost-effective and time-efficient repair when pre-bent lines are not available.

What type of plastic is resistant to gasoline?

A sturdy plastic like high-density polyethylene (HDPE) is commonly used to make plastic gas cans and barrels because it insulates its contents, and shields gas from the heat of its environment. It's also antibacterial to prevent contamination and is rust-resistant, meaning nothing will leak out of rusted sections.

How do I install quick connect fuel fittings?

1:352:24Installing Quick Connects Into OE Line - YouTubeYouTubeStart of suggested clipEnd of suggested clipWhatever. But there you go no clamps in fact if you put clamps on it it's probably going to leak. SoMoreWhatever. But there you go no clamps in fact if you put clamps on it it's probably going to leak. So all you need to do is just push it right in and you're all good to go.

How do fuel line quick disconnects work?

0:214:21How to Disconnect Common Fuel Line Fittings - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd location the push on the other side. So we're going to push this from both directions to releaseMoreAnd location the push on the other side. So we're going to push this from both directions to release it from the use. This type of push connector only pushes from one side as you can see the location.

How do you use quick disconnect tool for fuel lines?

5:599:03Fuel Line Quick Disconnect Tool & Safety: HOW TO ESCAPE - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd push the tool. In push the hose up against the tool. And then pull the hose. Off. And wait aMoreAnd push the tool. In push the hose up against the tool. And then pull the hose. Off. And wait a second for any fuel to drip. Out take this tool off remove everything here. And take my fuel line. Out.

What is best material for fuel line?

The best fuel line material depends on your needs. However, the best material for fuel lines is polytetrafluoroethylene or PTFE. PTFE fuel line is made of plastic material specifically known as Teflon. This fuel line material is impervious is resistant to the degenerative fuel effects which could form vapor barriers.

Will PVC hold up to gasoline?

Due to the nature of PVC and other plastics as well, they are not well suited to use for fuel gas or kerosene. PVC and other plastics deform easily in high temperature environments, and may leak or rupture.

Is polyethylene tubing safe for gasoline?

Polyethylene is the most common plastic in the world. Polyethylene tubing is a flexible, lightweight and highly durable substance used across many industries. It is safe to use with a wide variety of chemicals, gases, fluids and materials.